Skip to contentSkip to conversation

Auto Complete support

PATCH In review Pantelis Antoniou 6 participants 8 messages Mar 30, 2004 – Apr 15, 2004

lore
Share & tools
lore

Pantelis Antoniou

author
#0 lore raw

PATCH 1/1 Auto Complete support

Hello

The following patch adds auto-complete support to the u-boot command line.

Using TAB the parser will try to auto complete all commands and for a few commands it will also try to do the same for their arguments.

The commands that accept auto completion of their arguments are: setenv printenv & run.

To enable just

#define CONFIG_AUTO_COMPLETE

at the board config.h file.

Regards

Pantelis
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: autocomplete.diffstat
Url: http://lists.denx.de/pipermail/u-boot/attachments/20040330/20e143aa/attachment.txt
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: autocomplete.diff
Url: http://lists.denx.de/pipermail/u-boot/attachments/20040330/20e143aa/attachment-0001.txt

#1 lore raw

PATCH 1/1 Auto Complete support

Quoted 2 lines · Pantelis Antoniou

The following patch adds auto-complete support to the u-boot command line.

Cool!

Robert

Signature · 5 lines
 Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de
 Pengutronix - Linux Solutions for Science and Industry
   Handelsregister:  Amtsgericht Hildesheim, HRA 2686
     Hornemannstra?e 12,  31137 Hildesheim, Germany
    Phone: +49-5121-28619-0 |  Fax: +49-5121-28619-4
#2 lore raw

[U-Boot-Users] EZkit bf533 board

Hi,

Anybody using EZ-KIT lite BF533 board? Can you pls let me know the memory
map for Ethernet interface? Any document to mention the same. for eg, in BF535 ez-kit board, i think the BASE_ADDRESS for ethernet is 0x2c000300.

regards
vidya

#3 lore raw

[U-Boot-Users] EZkit bf533 board

Quoted 6 lines

Hi,

Anybody using EZ-KIT lite BF533 board? Can you pls let me know the memory
map for Ethernet interface? Any document to mention the same. for eg, in BF535 ez-kit board, i think the BASE_ADDRESS for ethernet is 0x2c000300.

Why don't you ask ADI directly?

They should know exactly since they made the EZKit LAN board... although it isn't released officialy yet (o;

But maybe they also have NDA as you do (o;

best regards
rick

PS: BF533EZKit Lite isn't the official (uC)Linux platform from ADI

#4 lore raw

[U-Boot-Users] EZkit bf533 board

In reply to Vidya S

For all EZkit BF-531/2/3/5 the EZ-LAN is mapped with Async Bank3. The BASE_ADDRESS for EZ-LAN card access in the EZkit - BF533 is 0x20300000

Regards
Ganapathi C

----- Original Message -----
From: "Vidya S" <[email protected]>
To: "U-Boot Users" <[email protected]>
Sent: Tuesday, April 06, 2004 6:07 PM
Subject: [U-Boot-Users] EZkit bf533 board

Quoted 3 lines

Hi,

Anybody using EZ-KIT lite BF533 board? Can you pls let me know the

memory

Quoted 17 lines

map for Ethernet interface? Any document to mention the same. for eg, in BF535 ez-kit board, i think the BASE_ADDRESS for ethernet is 0x2c000300.

regards
vidya

-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

#5 lore raw

[U-Boot-Users] EZkit bf533 board

but as far as i know the async mem bank 3 starts from 0x2c000000 in bf535 right?
why is it that in 535 u-boot its taken as 0x2c000300. pls let me know

-----Original Message-----
From: ganapathi [mailto:ganapathi at isofttech.com]
Sent: Tuesday, April 06, 2004 7:36 PM
To: Vidya S; U-Boot Users
Subject: Re: [U-Boot-Users] EZkit bf533 board

For all EZkit BF-531/2/3/5 the EZ-LAN is mapped with Async Bank3. The BASE_ADDRESS for EZ-LAN card access in the EZkit - BF533 is 0x20300000

Regards
Ganapathi C

----- Original Message -----
From: "Vidya S" <[email protected]>
To: "U-Boot Users" <[email protected]>
Sent: Tuesday, April 06, 2004 6:07 PM
Subject: [U-Boot-Users] EZkit bf533 board

Quoted 3 lines

Hi,

Anybody using EZ-KIT lite BF533 board? Can you pls let me know the

memory

Quoted 17 lines

map for Ethernet interface? Any document to mention the same. for eg, in BF535 ez-kit board, i think the BASE_ADDRESS for ethernet is 0x2c000300.

regards
vidya

-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

#6 lore raw

[U-Boot-Users] EZkit bf533 board

Quoted 4 lines

but as far as i know the async mem bank 3 starts from 0x2c000000 in bf535 right?
why is it that in 535 u-boot its taken as 0x2c000300. pls let me know

Please see the 91c111 datasheet why it is that way (o;

rick

#7 lore raw
In reply to Pantelis Antoniou
Quoted 3 lines · In message <[email protected]> you wrote:

The following patch adds auto-complete support
to the u-boot command line.

Cool. Added, thanks.

Best regards,

Wolfgang Denk

Signature · 3 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
"Tell the truth and run."                          - Yugoslav proverb