Sound on newer arima notebook...
Hi!
...seems to work okay, except that mixers are strangely renumbered in aumix. PCM2 has to be set to high if I want to hear something. Master volume does not do anything.
Dmesg tells me:
Advanced Linux Sound Architecture Driver Version 1.0.2c (Thu Feb 05 15:41:49 2004 UTC).
via82xx: Assuming DXS channels with 48k fixed sample rate.
Please try dxs_support=1 or dxs_support=4 option
and report if it works on your machine.
PCI: Setting latency timer of device 0000:00:11.5 to 64
usb 2-1: new full speed USB device using address 2codec_read: codec 0 is not valid [0xfe0000]codec_read: codec 0 is not valid [0xfe0000]codec_read: codec 0 is not valid [0xfe0000]codec_read: codec 0 is not valid [0xfe0000]
ALSA device list:
#0: VIA 8235 at 0x1400, irq 22
With dxs_support=1 mixers were also renumbered, maybe in slightly different way.
Pavel
Signature · 2 lines
When do you have a heart between your knees? [Johanka's followup: and *two* hearts?]
Hi Pavel,
At Wed, 31 Mar 2004 16:52:06 +0200,
Quoted 6 lines · Pavel Machek
Hi!
...seems to work okay, except that mixers are strangely renumbered in aumix. PCM2 has to be set to high if I want to hear something. Master volume does not do anything.
tuning ac97_quirk option will help.
(perhaps ac97_quirk=1)
Quoted 12 lines
Dmesg tells me:
Advanced Linux Sound Architecture Driver Version 1.0.2c (Thu Feb 05 15:41:49 2004 UTC).
via82xx: Assuming DXS channels with 48k fixed sample rate.
Please try dxs_support=1 or dxs_support=4 option
and report if it works on your machine.
PCI: Setting latency timer of device 0000:00:11.5 to 64
usb 2-1: new full speed USB device using address 2codec_read: codec 0 is not valid [0xfe0000]codec_read: codec 0 is not valid [0xfe0000]codec_read: codec 0 is not valid [0xfe0000]codec_read: codec 0 is not valid [0xfe0000]
these messages appear sometimes on some via boards. i don't figure out yet what's wrong. it's often harmless.
Quoted 5 lines
ALSA device list:
#0: VIA 8235 at0x1400, irq 22With dxs_support=1 mixers were also renumbered, maybe in slightly different way.
dxs_support option is irrelevant with the mixer configuration. it's for PCM set up. check whether 44100Hz playback works with dxs_support=1. if it's ok, please let us know the pci subsystem id, so that it will be enabled as default.
--
Takashi Iwai <[email protected]> ALSA Developer - www.alsa-project.org
via82xx cmd line parsing is evil [was Re: Sound on newer arima notebook...]
Hi!
Quoted 6 lines
Quoted 3 lines
...seems to work okay, except that mixers are strangely renumbered in aumix. PCM2 has to be set to high if I want to hear something. Master volume does not do anything.
tuning
ac97_quirkoption will help.
(perhaps ac97_quirk=1)
via82xx command line parsing code is *evil*. It has completely different parameters as a module / in kernel, and in-kernel parameters shift according to the joystick support! (which is config_time option). Ouch.
Is there some easy way to convert MODULE_PARM with an array to some more modern interface?
Pavel
static int dxs_support[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)];
....MODULE_PARM(dxs_support, "1-" __MODULE_STRING(SNDRV_CARDS) "i");
MODULE_PARM_DESC(dxs_support, "Support for DXS channels (0 = auto, 1 = enable, 2 = disable, 3 = 48k only, 4 = no VRA)"); MODULE_PARM_SYNTAX(dxs_support, SNDRV_ENABLED ",allows:{{0,4}},dialog:list");
....
#if defined(CONFIG_GAMEPORT) || (defined(MODULE) && defined(CONFIG_GAMEPORT_MODULE))
#define SUPPORT_JOYSTICK 1
#endif
....
/* format is: snd-via82xx=enable,index,id,
mpu_port,joystick,
ac97_quirk,ac97_clock,dxs_support */static int __init alsa_card_via82xx_setup(char *str)
{
static unsigned __initdata nr_dev = 0;
if (nr_dev >= SNDRV_CARDS)
return 0;
(void)(get_option(&str,&enable[nr_dev]) == 2 &&
get_option(&str,&index[nr_dev]) == 2 &&
get_id(&str,&id[nr_dev]) == 2 &&
get_option_long(&str,&mpu_port[nr_dev]) == 2 &&
#ifdef SUPPORT_JOYSTICK
get_option(&str,&joystick[nr_dev]) == 2 &&
#endif
get_option(&str,&ac97_quirk[nr_dev]) == 2 &&
get_option(&str,&ac97_clock[nr_dev]) == 2 &&
get_option(&str,&dxs_support[nr_dev]) == 2);
nr_dev++;
return 1;
}Signature · 2 lines
When do you have a heart between your knees? [Johanka's followup: and *two* hearts?]
Re: via82xx cmd line parsing is evil [was Re: Sound on newer arima notebook...]
At Thu, 1 Apr 2004 10:09:54 +0200,
Quoted 7 lines · Pavel Machek
Hi!
Quoted 4 lines
Quoted 3 lines
...seems to work okay, except that mixers are strangely renumbered in aumix. PCM2 has to be set to high if I want to hear something. Master volume does not do anything.
Quoted 6 lines
Quoted 2 lines
tuning
ac97_quirkoption will help.
(perhaps ac97_quirk=1)via82xx command line parsing code is *evil*. It has completely different parameters as a module / in kernel, and in-kernel parameters shift according to the joystick support! (which is
config_timeoption). Ouch.
yep, i know it - it annoys me too...
Quoted 2 lines
Is there some easy way to convert
MODULE_PARMwith an array to some more modern interface?
there is a patch pending in my tree to allow empty boot options, such as
snd-via82xx=,,,,,2
but it doesn't improve so much.
perhaps the better way would be like
snd-via82xx=enable:1,ac97_quirk:4
??
in this way, it's hard to keep the compatibility with old boot parameters, but i don't think no one will complain if they see it nicer.
Takashi
Quoted 40 lines
static int dxs_support[SNDRV_CARDS] = {[0 ... (
SNDRV_CARDS- 1)];
....MODULE_PARM(dxs_support, "1-" __MODULE_STRING(SNDRV_CARDS) "i");
MODULE_PARM_DESC(dxs_support, "Support for DXS channels (0 = auto, 1 = enable, 2 = disable, 3 = 48k only, 4 = no VRA)");MODULE_PARM_SYNTAX(dxs_support, SNDRV_ENABLED ",allows:{{0,4}},dialog:list");
....
#ifdefined(CONFIG_GAMEPORT)|| (defined(MODULE) &&defined(CONFIG_GAMEPORT_MODULE))
#defineSUPPORT_JOYSTICK1
#endif
....
/* format is: snd-via82xx=enable,index,id,mpu_port,joystick, ac97_quirk,ac97_clock,dxs_support */static int
__initalsa_card_via82xx_setup(char *str){ static unsigned __initdata nr_dev = 0; if (nr_dev >= SNDRV_CARDS) return 0; (void)(get_option(&str,&enable[nr_dev]) == 2 && get_option(&str,&index[nr_dev]) == 2 && get_id(&str,&id[nr_dev]) == 2 && get_option_long(&str,&mpu_port[nr_dev]) == 2 && #ifdef SUPPORT_JOYSTICK get_option(&str,&joystick[nr_dev]) == 2 && #endif get_option(&str,&ac97_quirk[nr_dev]) == 2 && get_option(&str,&ac97_clock[nr_dev]) == 2 && get_option(&str,&dxs_support[nr_dev]) == 2); nr_dev++; return 1; }Signature · 2 lines
When do you have a heart between your knees? [Johanka's followup: and *two* hearts?]
Re: via82xx cmd line parsing is evil [was Re: Sound on newer arima notebook...]
Hi!
Quoted 16 lines
Quoted 3 lines
via82xx command line parsing code is *evil*. It has completely different parameters as a module / in kernel, and in-kernel parameters shift according to the joystick support! (which is
config_timeoption). Ouch.yep, i know it - it annoys me too...
Quoted 2 lines
Is there some easy way to convert
MODULE_PARMwith an array to some more modern interface?there is a patch pending in my tree to allow empty boot options, such as
snd-via82xx=,,,,,2but it doesn't improve so much.
perhaps the better way would be like
Quoted 7 lines
snd-via82xx=enable:1,ac97_quirk:4??
in this way, it's hard to keep the compatibility with old boot parameters, but i don't think no one will complain if they see it nicer.
Its so broken that we do not want compatibility, I believe. Having to use snd-via82xx=,,,,,2 normally, but add one "," if joystick is configured in is evil.
snd-via82xx=enable:1 syntax is ugly, too, and we have better syntax already. via82xx.enable=1 via82xx.ac97_quirk=2 should be possible with new param handling code. I'm just not sure how it is supposed to work with arrays:
static char *psmouse_proto;
static unsigned int psmouse_max_proto = -1U; module_param_named(proto, psmouse_proto, charp, 0); MODULE_PARM_DESC(proto, "Highest protocol extension to probe (bare, imps, exps). Useful for KVM switches.");
...automatically produces "proto" param for module and "psmouse.proto" param for kernel.
Something similar should be the way to go.
Pavel
Signature · 2 lines
When do you have a heart between your knees? [Johanka's followup: and *two* hearts?]
Re: via82xx cmd line parsing is evil [was Re: Sound on newer arima notebook...]
At Thu, 1 Apr 2004 10:29:05 +0200,
Quoted 27 lines · Pavel Machek
Hi!
Quoted 16 lines
Quoted 3 lines
via82xx command line parsing code is *evil*. It has completely different parameters as a module / in kernel, and in-kernel parameters shift according to the joystick support! (which is
config_timeoption). Ouch.yep, i know it - it annoys me too...
Quoted 2 lines
Is there some easy way to convert
MODULE_PARMwith an array to some more modern interface?there is a patch pending in my tree to allow empty boot options, such as
snd-via82xx=,,,,,2but it doesn't improve so much.
perhaps the better way would be like
Quoted 7 lines
snd-via82xx=enable:1,ac97_quirk:4??
in this way, it's hard to keep the compatibility with old boot parameters, but i don't think no one will complain if they see it nicer.
Quoted 7 lines
Its so broken that we do not want compatibility, I believe. Having to use snd-via82xx=,,,,,2 normally, but add one "," if joystick is configured in is evil.
snd-via82xx=enable:1 syntax is ugly, too, and we have better syntax already. via82xx.enable=1 via82xx.ac97_quirk=2 should be possible with new param handling code.
oh that's good to know.
Quoted 9 lines
I'm just not sure how it is supposed to work
with arrays:static char
*psmouse_proto;
static unsigned intpsmouse_max_proto= -1U;module_param_named(proto, psmouse_proto, charp, 0); MODULE_PARM_DESC(proto, "Highest protocol extension to probe (bare, imps, exps). Useful for KVM switches.");
Quoted 4 lines
...automatically produces "proto" param for module and "psmouse.proto" param for kernel.
Something similar should be the way to go.
ok, i'll take a look at it.
thanks!
Takashi
Re: via82xx cmd line parsing is evil [was Re: Sound on newer arima notebook...]
Hi Pavel,
does the attached patch work?
i checked the compilation for modules but not tested for builtin kernel.
Takashi
sound/pci/via82xx.c +10 -39
@@ -50,6 +50,7 @@#include <linux/init.h> #include <linux/pci.h> #include <linux/slab.h> +#include <linux/moduleparam.h> #include <linux/gameport.h> #include <sound/core.h> #include <sound/pcm.h>
@@ -57,7 +58,6 @@#include <sound/info.h> #include <sound/ac97_codec.h> #include <sound/mpu401.h> -#define SNDRV_GET_ID #include <sound/initval.h> #if 0
@@ -84,31 +84,32 @@static int ac97_clock[SNDRV_CARDS ] = {[0 ... (SNDRV_CARDS -1 )] =48000 };static int ac97_quirk[SNDRV_CARDS ] = {[0 ... (SNDRV_CARDS -1 )] =AC97_TUNE_DEFAULT };static int dxs_support[SNDRV_CARDS ]; +static int boot_devs__initdata ; -MODULE_PARM(index, "1-" __MODULE_STRING(SNDRV_CARDS) "i"); +module_param_array (index, int, boot_devs,0444 );MODULE_PARM_DESC (index,"Index value for VIA 82xx bridge." );MODULE_PARM_SYNTAX (index,SNDRV_INDEX_DESC ); -MODULE_PARM(id, "1-" __MODULE_STRING(SNDRV_CARDS) "s"); +module_param_array (id, charp, boot_devs,0444 );MODULE_PARM_DESC (id,"ID string for VIA 82xx bridge." );MODULE_PARM_SYNTAX (id,SNDRV_ID_DESC ); -MODULE_PARM(enable, "1-" __MODULE_STRING(SNDRV_CARDS) "i"); +module_param_array (enable, int, boot_devs,0444 );MODULE_PARM_DESC (enable,"Enable audio part of VIA 82xx bridge." );MODULE_PARM_SYNTAX (enable,SNDRV_ENABLE_DESC ); -MODULE_PARM(mpu_port, "1-" __MODULE_STRING(SNDRV_CARDS) "l"); +module_param_array (mpu_port, int, boot_devs,0444 );MODULE_PARM_DESC (mpu_port,"MPU-401 port. (VT82C686x only)" );MODULE_PARM_SYNTAX (mpu_port,SNDRV_PORT_DESC );#ifdef SUPPORT_JOYSTICK -MODULE_PARM(joystick, "1-" __MODULE_STRING(SNDRV_CARDS) "i"); +module_param_array (joystick, int, boot_devs,0444 );MODULE_PARM_DESC (joystick,"Enable joystick. (VT82C686x only)" );MODULE_PARM_SYNTAX (joystick,SNDRV_ENABLE_DESC "," SNDRV_BOOLEAN_FALSE_DESC );#endif -MODULE_PARM(ac97_clock, "1-" __MODULE_STRING(SNDRV_CARDS) "i"); +module_param_array (ac97_clock, int, boot_devs,0444 );MODULE_PARM_DESC (ac97_clock,"AC'97 codec clock (default 48000Hz)." );MODULE_PARM_SYNTAX (ac97_clock,SNDRV_ENABLED ",default:48000" ); -MODULE_PARM(ac97_quirk, "1-" __MODULE_STRING(SNDRV_CARDS) "i"); +module_param_array (ac97_quirk, int, boot_devs,0444 );MODULE_PARM_DESC (ac97_quirk,"AC'97 workaround for strange hardware." );MODULE_PARM_SYNTAX (ac97_quirk,SNDRV_ENABLED ",allows:{{-1,4}},dialog:list,default:-1" ); -MODULE_PARM(dxs_support, "1-" __MODULE_STRING(SNDRV_CARDS) "i"); +module_param_array (dxs_support, int, boot_devs,0444 );MODULE_PARM_DESC (dxs_support,"Support for DXS channels (0 = auto, 1 = enable, 2 = disable, 3 = 48k only, 4 = no VRA)" );MODULE_PARM_SYNTAX (dxs_support,SNDRV_ENABLED ",allows:{{0,4}},dialog:list" );
@@ -2200,33 +2201,3 @@module_init (alsa_card_via82xx_init)module_exit (alsa_card_via82xx_exit) - -#ifndef MODULE - -/* format is: snd-via82xx=enable,index,id, -mpu_port,joystick, -ac97_quirk,ac97_clock,dxs_support */ - -static int __init alsa_card_via82xx_setup (char *str) -{ -static unsigned __initdata nr_dev =0 ; - -if (nr_dev >=SNDRV_CARDS ) -return 0 ; - (void )(get_option (&str,&enable[nr_dev]) ==2 && -get_option (&str,&index[nr_dev]) ==2 && -get_id (&str,&id[nr_dev]) ==2 && -get_option_long (&str,&mpu_port[nr_dev]) ==2 && -#ifdef SUPPORT_JOYSTICK -get_option (&str,&joystick[nr_dev]) ==2 && -#endif -get_option (&str,&ac97_quirk[nr_dev]) ==2 && -get_option (&str,&ac97_clock[nr_dev]) ==2 && -get_option (&str,&dxs_support[nr_dev]) ==2 ); - nr_dev++; -return 1 ; -} - -__setup ("snd-via82xx=" , alsa_card_via82xx_setup); - -#endif /* ifndef MODULE */
Re: via82xx cmd line parsing is evil [was Re: Sound on newer arima notebook...]
In reply to Takashi IwaiHi!
Quoted 5 lines
Quoted 3 lines
snd-via82xx=enable:1 syntax is ugly, too, and we have better syntax already. via82xx.enable=1 via82xx.ac97_quirk=2 should be possible with new param handling code.
oh that's good to know.
And here's a patch. It compiles.
sound/pci/via82xx.c renamed from linux/sound/pci/via82xx.c +13 -41
@@ -51,6 +51,7 @@#include <linux/pci.h> #include <linux/slab.h> #include <linux/gameport.h> +#include <linux/moduleparam.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h>
@@ -60,9 +61,7 @@#define SNDRV_GET_ID #include <sound/initval.h> -#if 0 -#define POINTER_DEBUG -#endif +#undef POINTER_DEBUGMODULE_AUTHOR ("Jaroslav Kysela <[email protected]>" );MODULE_DESCRIPTION ("VIA VT82xx audio" );
@@ -82,33 +81,36 @@static int joystick[SNDRV_CARDS ];#endif static int ac97_clock[SNDRV_CARDS ] = {[0 ... (SNDRV_CARDS -1 )] =48000 }; -static int ac97_quirk[SNDRV_CARDS ] = {[0 ... (SNDRV_CARDS -1 )] =AC97_TUNE_DEFAULT }; -static int dxs_support[SNDRV_CARDS ]; +static int ac97_quirk[SNDRV_CARDS ] = {[0 ... (SNDRV_CARDS -1 )] =1 }; +static int dxs_support[SNDRV_CARDS ] = {[0 ... (SNDRV_CARDS -1 )] =1 }; -MODULE_PARM(index, "1-" __MODULE_STRING(SNDRV_CARDS) "i"); +int index_num, mpu_port_num, enable_num, joystick_num, ac97_clock_num, ac97_quirk_num, dxs_support_num; + +module_param_array (index, int, index_num,0666 );MODULE_PARM_DESC (index,"Index value for VIA 82xx bridge." );MODULE_PARM_SYNTAX (index,SNDRV_INDEX_DESC ); MODULE_PARM(id, "1-" __MODULE_STRING(SNDRV_CARDS) "s");MODULE_PARM_DESC (id,"ID string for VIA 82xx bridge." );MODULE_PARM_SYNTAX (id,SNDRV_ID_DESC ); -MODULE_PARM(enable, "1-" __MODULE_STRING(SNDRV_CARDS) "i"); +module_param_array (enable, int, enable_num,0666 );MODULE_PARM_DESC (enable,"Enable audio part of VIA 82xx bridge." );MODULE_PARM_SYNTAX (enable,SNDRV_ENABLE_DESC ); -MODULE_PARM(mpu_port, "1-" __MODULE_STRING(SNDRV_CARDS) "l"); +module_param_array (mpu_port, long, mpu_port_num,0666 );MODULE_PARM_DESC (mpu_port,"MPU-401 port. (VT82C686x only)" );MODULE_PARM_SYNTAX (mpu_port,SNDRV_PORT_DESC );#ifdef SUPPORT_JOYSTICK +module_param_array (joystick, int, joystick_num,0666 ); MODULE_PARM(joystick, "1-" __MODULE_STRING(SNDRV_CARDS) "i");MODULE_PARM_DESC (joystick,"Enable joystick. (VT82C686x only)" );MODULE_PARM_SYNTAX (joystick,SNDRV_ENABLE_DESC "," SNDRV_BOOLEAN_FALSE_DESC );#endif -MODULE_PARM(ac97_clock, "1-" __MODULE_STRING(SNDRV_CARDS) "i"); +module_param_array (ac97_clock, int, ac97_clock_num,0666 );MODULE_PARM_DESC (ac97_clock,"AC'97 codec clock (default 48000Hz)." );MODULE_PARM_SYNTAX (ac97_clock,SNDRV_ENABLED ",default:48000" ); -MODULE_PARM(ac97_quirk, "1-" __MODULE_STRING(SNDRV_CARDS) "i"); +module_param_array (ac97_quirk, int, ac97_quirk_num,0666 );MODULE_PARM_DESC (ac97_quirk,"AC'97 workaround for strange hardware." );MODULE_PARM_SYNTAX (ac97_quirk,SNDRV_ENABLED ",allows:{{-1,3}},dialog:list,default:-1" ); -MODULE_PARM(dxs_support, "1-" __MODULE_STRING(SNDRV_CARDS) "i"); +module_param_array (dxs_support, int, dxs_support_num,0666 );MODULE_PARM_DESC (dxs_support,"Support for DXS channels (0 = auto, 1 = enable, 2 = disable, 3 = 48k only, 4 = no VRA)" );MODULE_PARM_SYNTAX (dxs_support,SNDRV_ENABLED ",allows:{{0,4}},dialog:list" );
@@ -2169,33 +2171,3 @@module_init (alsa_card_via82xx_init)module_exit (alsa_card_via82xx_exit) - -#ifndef MODULE - -/* format is: snd-via82xx=enable,index,id, -mpu_port,joystick, -ac97_quirk,ac97_clock,dxs_support */ - -static int __init alsa_card_via82xx_setup (char *str) -{ -static unsigned __initdata nr_dev =0 ; - -if (nr_dev >=SNDRV_CARDS ) -return 0 ; - (void )(get_option (&str,&enable[nr_dev]) ==2 && -get_option (&str,&index[nr_dev]) ==2 && -get_id (&str,&id[nr_dev]) ==2 && -get_option_long (&str,&mpu_port[nr_dev]) ==2 && -#ifdef SUPPORT_JOYSTICK -get_option (&str,&joystick[nr_dev]) ==2 && -#endif -get_option (&str,&ac97_quirk[nr_dev]) ==2 && -get_option (&str,&ac97_clock[nr_dev]) ==2 && -get_option (&str,&dxs_support[nr_dev]) ==2 ); - nr_dev++; -return 1 ; -} - -__setup ("snd-via82xx=" , alsa_card_via82xx_setup); - -#endif /* ifndef MODULE */
Signature · 2 lines
When do you have a heart between your knees? [Johanka's followup: and *two* hearts?]
Re: via82xx cmd line parsing is evil [was Re: Sound on newer arima notebook...]
At Thu, 1 Apr 2004 11:04:52 +0200,
Quoted 11 lines · Pavel Machek
Hi!
Quoted 5 lines
Quoted 3 lines
snd-via82xx=enable:1 syntax is ugly, too, and we have better syntax already. via82xx.enable=1 via82xx.ac97_quirk=2 should be possible with new param handling code.
oh that's good to know.
And here's a patch. It compiles.
heh, we're crossfiring :)
sound/pci/via82xx.c line 85
Quoted 8 lines
sound/pci/via82xx.c renamed from linux/sound/pci/via82xx.c +2
-2@@ -82,33 +81,36 @@static int joystick[SNDRV_CARDS ];#endif static int ac97_clock[SNDRV_CARDS ] = {[0 ... (SNDRV_CARDS -1 )] =48000 }; -static int ac97_quirk[SNDRV_CARDS ] = {[0 ... (SNDRV_CARDS -1 )] =AC97_TUNE_DEFAULT }; -static int dxs_support[SNDRV_CARDS ]; +static int ac97_quirk[SNDRV_CARDS ] = {[0 ... (SNDRV_CARDS -1 )] =1 }; +static int dxs_support[SNDRV_CARDS ] = {[0 ... (SNDRV_CARDS -1 )] =1 };
i suppose that ac97_quirk=1 and dxs_support=1 work fine with your machine?
(i don't want to change defaults for all devices yet :)
Takashi
Re: via82xx cmd line parsing is evil [was Re: Sound on newer arima notebook...]
Hi!
Quoted 10 lines
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
snd-via82xx=enable:1 syntax is ugly, too, and we have better syntax already. via82xx.enable=1 via82xx.ac97_quirk=2 should be possible with new param handling code.
oh that's good to know.
And here's a patch. It compiles.
heh, we're crossfiring :)
Quoted 12 lines
sound/pci/via82xx.c line 85
Quoted 8 lines
sound/pci/via82xx.c renamed from linux/sound/pci/via82xx.c +2
-2@@ -82,33 +81,36 @@static int joystick[SNDRV_CARDS ];#endif static int ac97_clock[SNDRV_CARDS ] = {[0 ... (SNDRV_CARDS -1 )] =48000 }; -static int ac97_quirk[SNDRV_CARDS ] = {[0 ... (SNDRV_CARDS -1 )] =AC97_TUNE_DEFAULT }; -static int dxs_support[SNDRV_CARDS ]; +static int ac97_quirk[SNDRV_CARDS ] = {[0 ... (SNDRV_CARDS -1 )] =1 }; +static int dxs_support[SNDRV_CARDS ] = {[0 ... (SNDRV_CARDS -1 )] =1 };i suppose that ac97_quirk=1 and dxs_support=1 work fine with your machine?
(i don't want to change defaults for all devices yet :)
Oops, sorry, I was not able to test it yet.
Pavel
Signature · 2 lines
When do you have a heart between your knees? [Johanka's followup: and *two* hearts?]
Re: via82xx cmd line parsing is evil [was Re: Sound on newer arima notebook...]
In reply to Takashi IwaiHi!
Quoted 11 lines
sound/pci/via82xx.c line 85
Quoted 7 lines
static int joystick[SNDRV_CARDS];
#endif
static int ac97_clock[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS- 1)] = 48000};sound/pci/via82xx.c renamed from linux/sound/pci/via82xx.c +2
-2-static int ac97_quirk[SNDRV_CARDS ] = {[0 ... (SNDRV_CARDS -1 )] =AC97_TUNE_DEFAULT }; -static int dxs_support[SNDRV_CARDS ]; +static int ac97_quirk[SNDRV_CARDS ] = {[0 ... (SNDRV_CARDS -1 )] =1 }; +static int dxs_support[SNDRV_CARDS ] = {[0 ... (SNDRV_CARDS -1 )] =1 };i suppose that ac97_quirk=1 and dxs_support=1 work fine with your machine?
(i don't want to change defaults for all devices yet :)
ac97_quirk=1 helps (*) here. dxs_support=1 makes it sounds worse than usual.
Pavel
(*): Vol + PCM now controls output to headphones. Thats certainly better than output controlled by PCM + PCM2. I *still* can't make it play on internal speakers...
Signature · 2 lines
When do you have a heart between your knees? [Johanka's followup: and *two* hearts?]
Re: via82xx cmd line parsing is evil [was Re: Sound on newer arima notebook...]
At Thu, 1 Apr 2004 20:24:17 +0200,
Quoted 15 lines · Pavel Machek
Hi!
Quoted 11 lines
sound/pci/via82xx.c line 85
Quoted 7 lines
static int joystick[SNDRV_CARDS];
#endif
static int ac97_clock[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS- 1)] = 48000};sound/pci/via82xx.c renamed from linux/sound/pci/via82xx.c +2
-2-static int ac97_quirk[SNDRV_CARDS ] = {[0 ... (SNDRV_CARDS -1 )] =AC97_TUNE_DEFAULT }; -static int dxs_support[SNDRV_CARDS ]; +static int ac97_quirk[SNDRV_CARDS ] = {[0 ... (SNDRV_CARDS -1 )] =1 }; +static int dxs_support[SNDRV_CARDS ] = {[0 ... (SNDRV_CARDS -1 )] =1 };i suppose that ac97_quirk=1 and dxs_support=1 work fine with your machine?
(i don't want to change defaults for all devices yet :)
Quoted 2 lines
ac97_quirk=1 helps (*) here. dxs_support=1 makes it sounds worse than usual.
dxs_support=4 might help, then.
in the worst case, you can use dxs_support=2, which disables DXS channels completely. the multi playback won't work, though.
Quoted 3 lines
(*): Vol + PCM now controls output to headphones. Thats certainly better than output controlled by PCM + PCM2. I *still* can't make it play on internal speakers...
which ac97 codec? you can see it in
/proc/asound/card0/pcm0p/codec97#0/ac97#0-0.
Takashi