40x PPC relocation issue during boot
Looking at the current 2.6 tree, there's an issue when one tries to boot a zImage image (with or without an attached initrd). This is present in the -benh tree as well.
In ~/arch/ppc/boot/simple/relocate.S the following snip is present:
..
li r9,0xc mtlr r9 #ifdef CONFIG_PPC_MULTIPLATFORM /* tell kernel we're prep, by putting 0xdeadc0de at KERNELLOAD, * and tell the kernel to start on the 4th instruction since we * overwrite the first 3 sometimes (which are 'nop'). */ lis r10,0xdeadc0de@h ori r10,r10,0xdeadc0de@l li r9,0 stw r10,0(r9)
#endif
blr
We jump to the 4th instruction, but for the 40x class of cpu's this inst being taken into account anymore. 3 nop's are missing from head_4xx.S:
.text_GLOBAL(_stext)_GLOBAL(_start)
/* Save parameters we are passed. */ mr r31,r3 mr r30,r4 ... ...
The requirements of the 3 nops is silly anyway, but the relocation code needs to be fixed. I haven't done the patch as I'm not sure if any other code will overwrite the first 3 instructions. I hit this bug on an IBM 405EP dev platform.
Torben
-
Quoted 5 lines · Torben Mathiasen
Looking at the current 2.6 tree, there's an issue when one tries to boot a zImage image (with or without an attached initrd). This is present in the -benh tree as well.
In
~/arch/ppc/boot/simple/relocate.Sthe following snip is present:
Tom and I discussed this yesterday since it was breaking ppc44x as well. He already has a relocate.S patch in akpm's queue to fix the issue.
-Matt