Skip to contentSkip to conversation

AM53C974 driver missing in 2.6.5

DISCUSSION Christian Roessner 3 participants 3 messages Apr 9, 2004

lore
Share & tools
lore
#0 lore raw

Hello,

I found at Google that the AM53C974 was removed since 2.6.0. My problem is:
This driver is the only one that ever worked (2.4 kernels) for my TEAC CD writer. The tmscsim doesn´t do its job and that has nothing to do with the latency thing with SCSI-2.

Is there a chance you could put the AM53C974 back in the kernel? Otherwise I will not be able to burn CDs under linux anymore :-(

Thanks for comments in advance

Christian

#1 lore raw
Quoted 4 lines · Christian Roessner

I found at Google that the AM53C974 was removed since 2.6.0. My problem is:
This driver is the only one that ever worked (2.4 kernels) for my TEAC CD writer. The tmscsim doesn?t do its job and that has nothing to do with the latency thing with SCSI-2.

Why does tmscsim not do its job? What is the problem? What brand and type is your host adaptor? (add lspci if possible)

Quoted 2 lines

Is there a chance you could put the AM53C974 back in the kernel? Otherwise I will not be able to burn CDs under linux anymore :-(

The AM53C974 driver was removed because it was unmaintained and broken, it would have been a lot of work to a) fix the driver, b) port it to 2.6. tmscsim only required b). Even if AM53C974 were put back and ported to 2.6, it would still be broken.

If it was put back, it still wouldn't work.

I don't know who the official maintainer for tmscsim is now - Kurt Garloff is still listed, but I wonder if he has time. Describing your problem in detail on linux-scsi@ might be a good idea.

Signature · 3 lines
Matthias Andree

Encrypt your mail: my GnuPG key ID is 0x052E7D95
#2 lore raw
In reply to Christian Roessner

Hi

Quoted 7 lines · Christian Roessner

I found at Google that the AM53C974 was removed since 2.6.0. My problem is:
This driver is the only one that ever worked (2.4 kernels) for my TEAC CD writer. The tmscsim doesn╢t do its job and that has nothing to do with the latency thing with SCSI-2.

Is there a chance you could put the AM53C974 back in the kernel? Otherwise I will not be able to burn CDs under linux anymore :-(

It is, of course, preferred to fix the tmscsim driver to work for you too. If you describe your problem precisely, we could try solving it. There was a discussion around 2.6.0 on the linux-scsi mailing list whether or not to keep the AM53C974 driver, and it was decided not to, since the tmscsim should completely replace it. However, I did write a simple patch that allowed to compile and use AM53C974 under 2.6. I sent it to LKML on 30.10.03 with the subject "[PATCH] Re: AMD 53c974 SCSI driver in 2.6". However, again, it would be preferred to improve tmscsim.

You might want to move this discussion to linux-scsi ([email protected]).

Guennadi
---
Guennadi Liakhovetski