block -> name ?
Hi,
Recently my computer running Linux kernel 2.4.25 started halting all of a sudden, and running badblocks a couple of times showed that it was caused by reading around block 20.200.000 on one of the SATA disks. I'll replace the drive eventually, but is there a way of finding out what file is currently residing in a specific block? I'd prefer something a bit more efficient than doing a 'wc' on 300GB of data (which also would miss all the directories). To make things more interesting, the disk is 1 of 4 in a RAID5 array, and is formatted with XFS.
Best regards,
/Daniel
Quoted 13 lines · Daniel Brahneborg
Hi,
Recently my computer running Linux kernel 2.4.25 started halting all of a sudden, and running badblocks a couple of times showed that it was caused by reading around block 20.200.000 on one of the SATA disks. I'll replace the drive eventually, but is there a way of finding out what file is currently residing in a specific block? I'd prefer something a bit more efficient than doing a 'wc' on 300GB of data (which also would miss all the directories). To make things more interesting, the disk is 1 of 4 in a RAID5 array, and is formatted with XFS.
Quoted 1 line
Best regards,
See xfs_db(8) and its blockget/blockuse commands.
cheers.
Signature · 1 line
Nathan