Skip to contentSkip to conversation

fedora and how to get mass storage devices (memory card readers) to work

DISCUSSION Rei Shinozuka 3 participants 5 messages Apr 13, 2004 – Apr 14, 2004

lore
Share & tools
lore
#0 lore raw

also, /var/log/messages reports:

[root@tuxedo shino]# tail -f /var/log/messages

Apr 12 22:36:57 tuxedo kernel: cdrom: This disc doesn't have any tracks I recognize!
Apr 12 22:37:01 tuxedo kernel: cdrom: This disc doesn't have any tracks I recognize!
Apr 12 22:48:44 tuxedo kernel: spurious 8259A interrupt: IRQ7.
Apr 12 22:50:54 tuxedo kernel: usb.c: USB disconnect on device 00:02.2-6 address 2
Apr 12 22:50:54 tuxedo devlabel: devlabel service started/restarted
Apr 12 22:50:56 tuxedo kernel: hub.c: new USB device 00:02.2-6, assigned address 3
Apr 12 22:50:56 tuxedo kernel: usb.c: USB device not accepting new address=3 (error=-71)
Apr 12 22:50:56 tuxedo kernel: hub.c: new USB device 00:02.2-6, assigned address 4
Apr 12 22:50:59 tuxedo usb.agent[25333]: missing kernel or user mode driver usb-storage 
Apr 12 22:51:00 tuxedo devlabel: devlabel service started/restarted

----- Forwarded message from Rei Shinozuka <[email protected]> -----

Subject: fedira and how to get mass storage devices (memory card readers) to work
From: Rei Shinozuka <[email protected]>
Date: Mon, 12 Apr 2004 22:54:02 -0400
To: Newbie Linux Users <[email protected]>

a real newbie-type question.

in my 2.4.7-10 RH7.2 i just put in my /etc/fstab
/dev/sda1 /mnt/camera auto noauto,owner,kudzu 0 0

then i could just mount my cameras and cards (in a lexar reader) nad they were just files on /mnt/camera.

but now i get mount: /dev/sda1 is not a valid block device
brw-rw---- 1 root disk 8, 1 Sep 15 2003 /dev/sda1

anything i am doing wrong? BTW, i do also have a USB HP printer on the machine, which works fine.

thanks,

-rei

Signature · 20 lines
Rei Shinozuka [email protected]
Ridgewood, New Jersey

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

----- End forwarded message -----

-- 
Rei Shinozuka [email protected]
Ridgewood, New Jersey

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#1 lore raw
Quoted 2 lines · Rei Shinozuka
Apr 12 22:50:59 tuxedo usb.agent[25333]: missing kernel or user mode driver

usb-storage

missing support for usb-storage, possably its a module and its not getting loaded.

modprobe usb-storage

before plugging in the device.

Signature · 15 lines
If the Linux community is a bunch of theives because they
try to imitate windows programs, then the Windows community
is built on organized crime.

Regards Richard
[email protected]
http://people.zeelandnet.nl/pa3gcu/



-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#2 lore raw
In reply to Rei Shinozuka
Quoted 10 lines · On Mon, 12 Apr 2004 22:59:03 -0400 Rei Shinozuka <[email protected]> wrote:

also, /var/log/messages reports:

[root@tuxedo shino]# tail -f /var/log/messages

Apr 12 22:36:57 tuxedo kernel: cdrom: This disc doesn't have any

tracks I recognize! Apr 12 22:37:01 tuxedo kernel: cdrom: This disc doesn't have any tracks I recognize! Apr 12 22:48:44 tuxedo kernel:
spurious 8259A interrupt: IRQ7. Apr 12 22:50:54 tuxedo kernel:
usb.c: USB disconnect on device 00:02.2-6 address 2 Apr 12 22:50:54 tuxedo devlabel: devlabel service started/restarted Apr 12 22:50:56 tuxedo kernel: hub.c: new USB device 00:02.2-6, assigned address 3

Quoted 6 lines
Apr 12 22:50:56 tuxedo kernel: usb.c: USB device not accepting new

address=3 (error=-71) Apr 12 22:50:56 tuxedo kernel: hub.c: new USB device 00:02.2-6, assigned address 4 Apr 12 22:50:59 tuxedo usb.agent[25333]: missing kernel or user mode driver usb-storage Apr 12 22:51:00 tuxedo devlabel: devlabel service started/restarted

< Rest deleted....>

Hi,
Here are the commands I use to view files on my camera. I have problems remembering how to do things so the commands are in a file. :-)

jpk@debian:~$ cat mounting_a_usb_tingy.txt 
# usbview
# lsmod
# modprobe usb-storage
# mount -t usbdevfs 0  /proc/bus/usb
# mount -t vfat /dev/sda1 /mnt/usb/

usbview shows what usb devices are connected to the machine. lsmod
shows what modules are loaded.
You need the usb-storage modules (or have it compiled into the kernel), so modprobe usb-storage loads the usb storage module. I think you might also need the generic SCCI module too. If so you may have to do: modprobe sg
I can't remember the details about the next command but it is necessary on my machine mount -t usbdevfs 0 /proc/bus/usb And finally, I mount the filesystem manually with
mount -t vfat /dev/sda1 /mnt/usb/

Hope this helps.

reagards,

John Kelly

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

#3 lore raw

well, lsmod did show:

Module Size Used by Tainted: P
usb-storage 75136 0
....

and interestingly, usbview
showed the the card reader is recognized:

http://www.shinozuka-family.com/USBViewer.jpg

but the last 2 commands return errors:

[root@tuxedo root]# mount -t usbdevfs 0 /proc/bus/usb
mount: 0 already mounted or /proc/bus/usb busy
mount: according to mtab, usbdevfs is already mounted on /proc/bus/usb [root@tuxedo root]# mount -t vfat /dev/sda1 /mnt/usb/
mount: /dev/sda1 is not a valid block device
[root@tuxedo root]#

i feel we are getting closer!!

thanks,

-rei

Quoted 59 lines · John Kelly
Quoted 10 lines · On Mon, 12 Apr 2004 22:59:03 -0400 Rei Shinozuka <[email protected]> wrote:

also, /var/log/messages reports:

[root@tuxedo shino]# tail -f /var/log/messages

Apr 12 22:36:57 tuxedo kernel: cdrom: This disc doesn't have any

tracks I recognize! Apr 12 22:37:01 tuxedo kernel: cdrom: This disc doesn't have any tracks I recognize! Apr 12 22:48:44 tuxedo kernel:
spurious 8259A interrupt: IRQ7. Apr 12 22:50:54 tuxedo kernel:
usb.c: USB disconnect on device 00:02.2-6 address 2 Apr 12 22:50:54 tuxedo devlabel: devlabel service started/restarted Apr 12 22:50:56 tuxedo kernel: hub.c: new USB device 00:02.2-6, assigned address 3

Quoted 6 lines
Apr 12 22:50:56 tuxedo kernel: usb.c: USB device not accepting new

address=3 (error=-71) Apr 12 22:50:56 tuxedo kernel: hub.c: new USB device 00:02.2-6, assigned address 4 Apr 12 22:50:59 tuxedo usb.agent[25333]: missing kernel or user mode driver usb-storage Apr 12 22:51:00 tuxedo devlabel: devlabel service started/restarted

< Rest deleted....>

Hi,
Here are the commands I use to view files on my camera. I have problems remembering how to do things so the commands are in a file. :-)

jpk@debian:~$ cat mounting_a_usb_tingy.txt 
# usbview
# lsmod
# modprobe usb-storage
# mount -t usbdevfs 0  /proc/bus/usb
# mount -t vfat /dev/sda1 /mnt/usb/

usbview shows what usb devices are connected to the machine. lsmod
shows what modules are loaded.
You need the usb-storage modules (or have it compiled into the kernel), so modprobe usb-storage loads the usb storage module. I think you might also need the generic SCCI module too. If so you may have to do: modprobe sg
I can't remember the details about the next command but it is necessary on my machine mount -t usbdevfs 0 /proc/bus/usb And finally, I mount the filesystem manually with
mount -t vfat /dev/sda1 /mnt/usb/

Hope this helps.

reagards,

John Kelly

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs

Signature · 8 lines
Rei Shinozuka [email protected]
Ridgewood, New Jersey

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
#4 lore raw

Hi,

Quoted 21 lines · On Tue, 13 Apr 2004 22:34:55 -0400 Rei Shinozuka <[email protected]> wrote:

well, lsmod did show:

Module Size Used by Tainted: P
usb-storage 75136 0
....

and interestingly, usbview
showed the the card reader is recognized:

http://www.shinozuka-family.com/USBViewer.jpg

but the last 2 commands return errors:

[root@tuxedo root]# mount -t usbdevfs 0 /proc/bus/usb
mount: 0 already mounted or /proc/bus/usb busy
mount: according to mtab, usbdevfs is already mounted on /proc/bus/usb[root@tuxedo root]# mount -t vfat /dev/sda1 /mnt/usb/
mount: /dev/sda1 is not a valid block device [root@tuxedo root]#

Quoted 4 lines

i feel we are getting closer!!

thanks,

The error you get while trying to mount usbdevfs is a good thing - it shows ussbdevfs is already mounted. Well there is one other thing, is generic SCCI support enabled? This can be compiled into the kernel or loaded as a module. lsmod should show the generic SCCI module as sg. For example on my system, I get:

jpk@debian:~$ /sbin/lsmod | grep sg
sg                     24420   0 (unused)

And if SCCI support is in the kernel (either as a module or compiled in) and you still get an error trying to mount /dev/sda1, then I would suggest trying to mount another SCCI drive. ie. Try
mount -t vfat /dev/sda2 /mnt/usb/
or
mount -t vfat /dev/sdb1 /mnt/usb/

I am not sure but I seem to recall that with generic scci, the first 'thingy' to use it gets the first scci device ie /dev/sda and the next 'thingy' gets the next scci device. So if something is using /dev/sda1
- for example a cd writer - then the usb device will be the next available scci device.

regards,

John Kelly
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs