Remote X
Hi all.
I am trying to set up a remote X conection. And i am reading about XFree86.
I will tell you what i understood, and you tell me if i am wrong.
I did some tests in my pc. i have started two or more Xfree86 server like
this:
$:XFree86 :(a) vt(b)
and after that, run wmaker like this:
$:wmaker -display :(a)
and it worked fine. I think i can do something like this, but running
wmaker in another pc on my lan, like:
$:wmaker -display 192.168.0.1:(a)
where 192.168.0.1 is the ip from machine where i started XFree86. I think
this shoud start wmaker any pc from my lan, working in host 192.168.0.1. Is this correct?, or need to change something?. what is it?.
Besides, i know about VNC. I have tried it, and it is great how it works
windo$/linux platforms crossover. But, if you know about any other way to make remotes X sessions, please, tell me. I will ask you, too, about any window$ X client to work with Xfree86, if there is any.
Thaks !!
_____
/ ___/
/ /_ ____ ____ ____ Facundo Suárez - [email protected]
/ __/ / __ \ / ___\ / __ \ Instrumentos - ENSI SE
/ / / /_/ / / /___ / /_/ / Arroyito - Argentina
/_/ \_____\ \____/ \____/ Usuario Registrado Linux-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
That's correct. The only step you left out, is you need to tell the XServer to allow the remote computer to display on the XServer, with xhost.
For example:
host1$:XFree86 :(a) vt(b)
host1$:xhost +host2
host2$:wmaker -display host1:(a)
HTH,
Conway S. Smith
Quoted 3 lines · Juan Facundo Suárez
Hi all.
I am trying to set up a remote X conection. And i am reading about
XFree86.
Quoted 10 lines
I will tell you what i understood, and you tell me if i am wrong.
I did some tests in my pc. i have started two or more Xfree86 server like
this:$:XFree86 :(a) vt(b)
and after that, run wmaker like this:
$:wmaker -display :(a)
Quoted 7 lines
and it worked fine. I think i can do something like this, but running
wmaker in another pc on my lan, like:$:wmaker -display 192.168.0.1:(a)
where 192.168.0.1 is the ip from machine where i started XFree86. I think
this shoud start wmaker any pc from my lan, working in host
192.168.0.1. Is
Quoted 7 lines
this correct?, or need to change something?. what is it?.
Besides, i know about VNC. I have tried it, and it is great how it works
windo$/linux platforms crossover. But, if you know about any other way to make remotes X sessions, please, tell me. I will ask you, too, about any window$ X client to work with Xfree86, if there is any.
Quoted 5 lines
Thaks !!
_____ / ___// /_ ____ ____ ____ Facundo Suárez -
Quoted 10 lines
/ __/ / __ \ / ___\ / __ \ Instrumentos - ENSI SE / / / /_/ / / /___ / /_/ / Arroyito - Argentina /_/ \_____\ \____/ \____/ Usuario Registrado Linux-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)
iD8DBQFAetO7GL3AU+cCPDERAneyAKCd6M38TkFo6c8L62lZfTpVN6Pp5wCgrzap 71FZ/wzqPLE53y/EwLyOUbM=
=lJon
-----END PGP SIGNATURE-----
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Hi, i could do it. I am really happy about that.
Now, what i need is to connect a window$ machine, as an X server, to a
session / window manager on a remote linux machine. I have heared about cygwin / winx32. I am trying cygwin, but i dont understand how to set it up, to use it, as an X server. Running the cygwin application, it opens something too much like an "xterm". I can run many linux commands in there. I tried to "XFree86" or "startx" commands, but nothing. Have i install an x server on cygwin to make it work?. Any help?.
Besides, i will try xwin32 too. If anyone can tell me something to "take
care" for using it, or any help, i will be very thaks.
See you !
| -----Mensaje original----- | De: [email protected] | [mailto:[email protected]]En nombre de Beolach | Enviado el: Lunes, 12 de Abril de 2004 02:37 p.m. | Para: Juan Facundo Suárez | Cc: [email protected] | Asunto: Re: Remote X | | | -----BEGIN PGP SIGNED MESSAGE----- | Hash: SHA1 | | That's correct. The only step you left out, is you need to tell the | XServer to allow the remote computer to display on the | XServer, with xhost. | | For example: | | host1$:XFree86 :(a) vt(b) | host1$:xhost +host2 | | host2$:wmaker -display host1:(a) | | HTH, | Conway S. Smith |
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I've never done this, so I don't have much info for you. But the one thing I can think of, is you might want to make sure you are using cygwin/X, not just cygwin. cygwin is just a port of the standard *nix console commands (ls, cp, cat, dd, etc.), whereas cygwin/X adds a port of the X Window System, including an X Server. For more info see
<http://x.cygwin.com/>.
Also note there a probably several other M$ Windows X Servers out there, but I personally have never used any, so I can't recommend one over any other.
Good luck,
Conway S. Smith
Quoted 5 lines · Juan Facundo Suárez
Hi, i could do it. I am really happy about that.
Now, what i need is to connect a window$ machine, as an X server, to a
session / window manager on a remote linux machine. I have heared about cygwin / winx32. I am trying cygwin, but i dont understand how to set
it up,
Quoted 2 lines
to use it, as an X server. Running the cygwin application, it opens something too much like an "xterm". I can run many linux commands in
there.
Quoted 1 line
I tried to "XFree86" or "startx" commands, but nothing. Have i install
an x
Quoted 7 lines
server on cygwin to make it work?. Any help?.
Besides, i will try xwin32 too. If anyone can tell me something to "take
care" for using it, or any help, i will be very thaks.See you !
<snip>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)
iD8DBQFAfBx3GL3AU+cCPDERAtYuAKDdTUsYHPx6anncsBCEuLIXxWgfPgCaA2qy C8DzqvJ88i/QWyUiORWkU98=
=Ri9v
-----END PGP SIGNATURE-----
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Quoted 8 lines · Juan Facundo Suárez
Hi all.
Besides, i know about VNC. I have tried it, and it is great how it works
windo$/linux platforms crossover. But, if you know about any other way to make remotes X sessions, please, tell me. I will ask you, too, about any window$ X client to work with Xfree86, if there is any.
Google for NXClient and NXServer. It is fairly easy to set up and does compression so it will work respectably even over dial up, will forward sound, and a host of other neat stuff. Plus they have a linux and windows client which both work awesomely. Check it out. I think their company name is Nomachine.
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
First thing to note here, is a bit of nomenclature. For X windows, the server is the machine with the DISPLAY The client is the one running the program.
I"m going to presume here, that the Linux box is
supposed to be the server.
First of all, you need to make sure that the Linux box is allowing connections from the remote machine. If you've already started a window manager (looks like you're using windowmaker,) you do NOT need to start it again from the PC, but you DO need to provide access to the PC from the Linux server
if you have a local xterm running on the PC, try going:
xhost + 192.168.0.2
(presuming that this is the address of the PC). This is the most INsecure way of doing this (read up on xauth for a better way), but it's OK for testing.
if you want to be *really* insecure,
xhost +
will allow ANY machine which can get packets to your box to open up a connection.
On the PC, try something simpler than another windowing program, like an xterm, or xclock....
xclock -display 192.168.0.1:(a)
[ I'm presumimg that (a) is replaced by a number...]
Note: if you really want to start windowmaker from the PC, then you should NOT be starting it on the Linux box... You don't want two window managers running at the same time on one (virtual) display.
Quoted 41 lines · Juan Facundo Suárez
Hi all.
I am trying to set up a remote X conection. And i am reading about XFree86.
I will tell you what i understood, and you tell me if i am wrong.
I did some tests in my pc. i have started two or more Xfree86 server like
this:$:XFree86 :(a) vt(b)
and after that, run wmaker like this:
$:wmaker -display :(a)
and it worked fine. I think i can do something like this, but running
wmaker in another pc on my lan, like:$:wmaker -display 192.168.0.1:(a)
where 192.168.0.1 is the ip from machine where i started XFree86. I think
this shoud start wmaker any pc from my lan, working in host 192.168.0.1. Is this correct?, or need to change something?. what is it?.Besides, i know about VNC. I have tried it, and it is great how it works
windo$/linux platforms crossover. But, if you know about any other way to make remotes X sessions, please, tell me. I will ask you, too, about any window$ X client to work with Xfree86, if there is any.Thaks !!
_____ / ___/ / /_ ____ ____ ____ Facundo Suárez - [email protected] / __/ / __ \ / ___\ / __ \ Instrumentos - ENSI SE / / / /_/ / / /___ / /_/ / Arroyito - Argentina /_/ \_____\ \____/ \____/ Usuario Registrado Linux-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Signature · 9 lines
Stephen Samuel +1(604)876-0426 [email protected] http://www.bcgreen.com/~samuel/ Powerful committed communication. Transformation touching the jewel within each person and bringing it to light. - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs