Skip to contentSkip to conversation

[2.6.5] problems with synaptics/psmouse/atkbd

DISCUSSION Mattia Dongili 2 participants 4 messages Apr 16, 2004 – May 16, 2004

lore
Share & tools
lore
#0 lore raw

[please could you Cc me as I'm not subscribed to linux-kernel]

Hi,

I'm having problems (since 2.6.3 now trying with 2.6.5).
Main symptom is that my synaptics touchpad isn't detected after a cold boot. After a warm boot it's detected correctly though.
In the cold boot case I have some weird behaviours loading psmouse:
[...]
psmouse_probe(): Probing mouse
psmouse_probe(): sending 0xa5
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
psmouse_probe(): Probing mouse
psmouse_probe(): sending 0xa5
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
psmouse_probe(): Probing mouse
psmouse_probe(): sending 0xa5
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
psmouse_probe(): Probing mouse
psmouse_probe(): sending 0xa5
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.

but XFree86 is not running! (I also added some further debug printks in psmouse_probe and psmouse_extensions but the latter is never reached)

unloading psmouse also disables the keyboard and prints a flood of atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.

this is /proc/bus/input/devices without synaptics touchpad

I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
H: Handlers=kbd event0
B: EV=120003
B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
B: LED=7

I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
H: Handlers=kbd event1
B: EV=40001
B: SND=6

I: Bus=0010 Vendor=104d Product=0000 Version=0000
N: Name="Sony VAIO Jog Dial"
P: Phys=
H: Handlers=mouse0 event2
B: EV=7
B: KEY=40000 0 0 0 0 0 0 0 0
B: REL=100

I: Bus=0003 Vendor=046d Product=c001 Version=0410
N: Name="Logitech USB Mouse"
P: Phys=usb-0000:00:1d.1-1/input0
H: Handlers=mouse1 event3
B: EV=f
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103
B: ABS=100 0

after a warm boot it adds:

I: Bus=0011 Vendor=0002 Product=0007 Version=0000
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio1/input0
H: Handlers=mouse2 event4
B: EV=b
B: KEY=6420 0 670000 0 0 0 0 0 0 0 0
B: ABS=11000003

and this is the relevant part of dmesg:
...
psmouse_probe(): Probing mouse
psmouse_probe(): sending 0xa5
psmouse_probe(): has an extended protocol? psmouse_extensions(): Going to probe Synaptics
psmouse_extensions(): Synaptics seems to be here
usb 2-1: new low speed USB device using address 2
input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.1-1 Synaptics Touchpad, model: 1
Firmware: 5.9
Sensor: 37
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
psmouse_extensions(): Synaptics inited!
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
...

any help/patch to spot the problem? Need more info? thanks in advance

Signature · 3 lines
mattia
:wq!
Hodie decimo sexto Kalendas Maias MMDCCLVII ab urbe condita est
#1 lore raw
Quoted 7 lines · Mattia Dongili

[please could you Cc me as I'm not subscribed to linux-kernel]

Hi,

I'm having problems (since 2.6.3 now trying with 2.6.5). Main symptom is that my synaptics touchpad isn't detected after a cold boot. After a warm boot it's detected correctly though.

Does it help if you load USB modules (*hci-hcd) first and then psmouse?

Signature · 1 line
Dmitry
#2 lore raw
Quoted 10 lines · Dmitry Torokhov
Quoted 7 lines · Mattia Dongili

[please could you Cc me as I'm not subscribed to linux-kernel]

Hi,

I'm having problems (since 2.6.3 now trying with 2.6.5). Main symptom is that my synaptics touchpad isn't detected after a cold boot. After a warm boot it's detected correctly though.

Does it help if you load USB modules (*hci-hcd) first and then psmouse?

no, it's already that way (I changed the modules loading order at 2.6.1 time when the synaptics mouse was being stolen by usb[1]):

# cat /etc/modules
uhci-hcd
hid
agpgart
intel-agp
radeon
pcspkr
evdev
speedstep-ich
sonypi
#parport_pc
#lp
psmouse

Also, I cannot disable USB Legacy support from bios.

I'm using a sony vaio gr7/k - same chipset as
PCG-GR214EP/GR214MP/GR215MP/GR314MP/GR315MP:

# lspci | grep -i usb
0000:00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 01)
0000:00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 01)
0000:00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 01)

the really weird things are the *This is an XFree86 bug* messages, when xfree isn't even running. Any idea? more debug printks I might add?

thanks (please still Cc me)

[1]: http://marc.theaimsgroup.com/?l=linux-kernel&m=107512283220051&w=2

Signature · 3 lines
mattia
:wq!
Hodie decimo sexto Kalendas Maias MMDCCLVII ab urbe condita est
#3 lore raw
In reply to Dmitry Torokhov
Quoted 10 lines · Dmitry Torokhov
Quoted 7 lines · Mattia Dongili

[please could you Cc me as I'm not subscribed to linux-kernel]

Hi,

I'm having problems (since 2.6.3 now trying with 2.6.5). Main symptom is that my synaptics touchpad isn't detected after a cold boot. After a warm boot it's detected correctly though.

Does it help if you load USB modules (*hci-hcd) first and then psmouse?

Hi there, I found the answer to my thread from Svetoslav Slavtchev [1] (unfortunately he didn't cc-ed me) in the list archives.

His patch solves my problem, any chance to see it included in the official kernel?
BTW, if more infos on this issue are needed I can easily supply them, eg:
this is a boot showing the problem:

  Apr 21 15:12:59 inferi kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
  Apr 21 15:12:59 inferi kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
  Apr 21 15:12:59 inferi kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
  Apr 21 15:12:59 inferi kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12

this doesn't:

  Apr 21 15:15:13 inferi kernel: serio: i8042 AUX port at 0x60,0x64 irq 12

thanks

[1]
http://marc.theaimsgroup.com/?l=linux-kernel&m=108213030732425&w=2

Signature · 2 lines
mattia
:wq!