Skip to contentSkip to conversation

USB problems: SanDisk SDDR-75 / Apacer AP-MSCRU10 card readers

DISCUSSION Vanja Hrustic 1 participant 1 message Apr 19, 2004

lore
Share & tools
lore
#0 lore raw

I have purchased SanDisk SDDR-75 card reader, since it was reported on quite few places to work (even with RH 7.3) ok on Linux.

However, I am experiencing problems with it, as well as with another reader I have (Apacer AP-MSCRU10).

Kernel is 2.4.26 (tried 2.4.25 as well), on RedHat 9. System is XP2500, on NForce2 motherboard.

Basically, when I plug card reader into USB port, it gets initialized but strange things happen. Sometimes, machine hangs completely, sometimes it hangs when I issue fdisk or mount commands, and in cases when it doesn't hang, I can't see CF disks in the drive. In rare cases when I do see the CF and can mount it, any bigger (more than 2-3MB) copy operation to CF will hang, and I have to disconnect the reader.

SanDisk SDDR-75 has 2 slots, Apacer AP-MSCRU10 has 3 slots.

But if I connect the digital camera (Nikon CoolPix 4300, has one CF slot), everything works just fine, and I have no trouble with it.

I have also tried changing /etc/modules.conf and adding options scsi_mod max_scsi_luns=X (where X was anywhere between 0 and 6, depending on what was connected and if SCSI emulation was enabled for CD-ROMs). I have seen this suggestion for some card readers, but it didn't help in my case.

I have attached output of 'grep "=[y|m]" .config' file to this mail.

Outputs (from /var/log/messages) for SanDisk, Apacer and Nikon are placed at:

SanDisk SDDR-75
http://www.vanja.com/reader/sandisk.txt

Apacer AP-MSCRU10
http://www.vanja.com/reader/apacer.txt

Nikon CoolPix 4300
http://www.vanja.com/reader/nikon.txt

There are no errors when Nikon is connected, but SanDisk/Apacer give errors like:

usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0

lspci -vvv output:
http://www.vanja.com/reader/lspci.txt

I can provide much more details (for example, when I try to access the device, if computer doesn't hang, much more errors come out), and I would appreciate any help (or pointers as what else to try, where to look) with this. I don't want to send too much output to the list, so I don't mind continuing this off the list - I would post the summary later, if I manage to fix this.

Thanks.

Vanja