Skip to contentSkip to conversation

ifplugd/e1000 oops

DISCUSSION Adam Goode 3 participants 4 messages Apr 19, 2004 – Apr 22, 2004

lore
Share & tools
lore

Adam Goode

author
#0 lore raw

Hi,

I'm using ifplugd to monitor the link beat and automatically bring up or down the network interfaces on my laptop.

When I unplugged my cable today, I got an oops. When I plugged it back in, nothing happened. (Normally it should beep and bring the interface back up.) When I removed and inserted the e1000 module, I got a freeze.

Thanks,

Adam

e1000: eth0 NIC Link is Down

Unable to handle kernel paging request at virtual address 00050052
 printing eip:
c02923c4
*pde = 00000000
Oops: 0000 [#1]
PREEMPT
CPU:    0
EIP:    0060:[<c02923c4>]    Tainted: PF
EFLAGS: 00210202   (2.6.6-rc1)

EIP is at rtnetlink_fill_ifinfo+0x284/0x450
eax: 00050046 ebx: db2ee098 ecx: 00000ee0 edx: db2ee0a0
esi: dee2f000 edi: db2ee090 ebp: 00000000 esp: d6f56e90
ds: 007b es: 007b ss: 0068
Process ifplugd (pid: 3549, threadinfo=d6f56000 task=cce1b3b0)

Stack: dee2f038 00000127 00000ee0 db2ee000 caad9380 0000003f caad9380 ffffffff
       00000011 dee2f000 c0292828 00000000 00000000 ffffffff c03759a0 dee2f000
       00000006 d6f56000 c0292cd5 c0128278 dee2f000 000152cd c0375840 c028c796
Call Trace:
 [<c0292828>] rtmsg_ifinfo+0x48/0xc0
 [<c0292cd5>] rtnetlink_event+0x25/0x4b
 [<c0128278>] notifier_call_chain+0x18/0x40
 [<c028c796>] netdev_wait_allrefs+0xc6/0x110
 [<c021053a>] class_device_del+0x8a/0xb0
 [<c028c8eb>] netdev_run_todo+0x10b/0x200
 [<c028bd2e>] dev_ifsioc+0x1e/0x3e0
 [<c028c208>] dev_ioctl+0x118/0x2d0
 [<c02c3e29>] inet_ioctl+0xb9/0xd0
 [<c0283c4e>] sock_ioctl+0xee/0x280
 [<c015efc6>] sys_ioctl+0xf6/0x240
 [<c014dd7f>] filp_close+0x4f/0x80
 [<c0105f2b>] syscall_call+0x7/0xb

Code: 8b 40 0c 31 db ba ff ff ff ff 89 d1 83 c0 08 89 c7 89 44 24
 <6>Intel(R) PRO/1000 Network Driver - version 5.2.39-k2

Copyright (c) 1999-2004 Intel Corporation.
PCI: Found IRQ 5 for device 0000:02:01.0
SysRq : Resetting

#1 lore raw
Quoted 6 lines · Adam Goode

I'm using ifplugd to monitor the link beat and automatically bring up or down the network interfaces on my laptop.

When I unplugged my cable today, I got an oops. When I plugged it back in, nothing happened. (Normally it should beep and bring the interface back up.) When I removed and inserted the e1000 module, I got a freeze.

I've got a report of a similar oops, also using ifplugd. User in question (on IRC) is complaining that this has been happening for all of 2.6, in late 2.5 (hasn't pinpointed any specific version) and in 2.4 since about 2.4.23.

Unfortunately in his case, it dies processing interrupts, so he gets nothing on disk, and is reluctant to set up a serial console on his box. I've tried emulating it here, but as yet have had no luck in getting it to oops.

Note: He's using an Intel EEPro/100B in his box, though he has a spare (unused) Realtek 8029 in there as well.

BTW: Kernel & ifplugd versions might be useful.

author
#2 lore raw

It's ifplugd version 0.23-1 (Debian). Kernel version 2.6.6-rc1.

I have a serial console, so I can help however I can. My machine is a ThinkPad X40, running without ACPI.

Adam

Quoted 28 lines · Cef (LKML)
Quoted 6 lines · Adam Goode

I'm using ifplugd to monitor the link beat and automatically bring up or down the network interfaces on my laptop.

When I unplugged my cable today, I got an oops. When I plugged it back in, nothing happened. (Normally it should beep and bring the interface back up.) When I removed and inserted the e1000 module, I got a freeze.

I've got a report of a similar oops, also using ifplugd. User in question (on IRC) is complaining that this has been happening for all of 2.6, in late 2.5 (hasn't pinpointed any specific version) and in 2.4 since about 2.4.23.

Unfortunately in his case, it dies processing interrupts, so he gets nothing on disk, and is reluctant to set up a serial console on his box. I've tried emulating it here, but as yet have had no luck in getting it to oops.

Note: He's using an Intel EEPro/100B in his box, though he has a spare (unused) Realtek 8029 in there as well.

BTW: Kernel & ifplugd versions might be useful.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#3 lore raw

difference btween the kernel for bfin 533 and kernel for bfin 533.

In reply to Adam Goode

hi,

i am working on kernel (linux-2.4.x) porting for black fin 535.

i wanted to know the dfference between the kernel for blackfin 533 and the kernel for blackfin 535.

If any one could give me the details or use full links, it wud be very helpful.

Thanx n regards
megharaj.