Sensors (W83627HF) in Tyan S2882
Hello, world!\n
I have two systems with Tyan S2882 boards (K8S Pro). The sensors chip
is Winbond w83627hf according to the mainboard documentation. The w83627hf driver can read values from the sensors, but apparently not all values. The board has six fan connectors (two labeled CPU1 fan and CPU2 fan, and four chassis fans). BIOS displays the fan status correctly for all fans, so all fans are connected to the sensors chip. However, there are only three fans listed in /sys/devices/platform/i2c-1/1-0290.
Is it possible to read status of other three fans from Linux?
Thanks,
-Yenya
Signature · 5 lines
| Jan "Yenya" Kasprzak <kas at {fi.muni.cz - work | yenya.net - private}> |
| GPG: ID 1024/D3498839 Fingerprint 0D99A7FB206605D7 8B35FCDE05B18A5E |
| http://www.fi.muni.cz/~kas/ Czech Linux Homepage: http://www.linux.cz/ |
Any compiler or language that likes to hide things like memory allocations
behind your back just isn't a good choice for a kernel. --Linus TorvaldsQuoted 9 lines · Jan Kasprzak
Hello, world!\n
I have two systems with Tyan S2882 boards (K8S Pro). The sensors chip
is Winbond w83627hf according to the mainboard documentation. The w83627hf driver can read values from the sensors, but apparently not all values. The board has six fan connectors (two labeled CPU1 fan and CPU2 fan, and four chassis fans). BIOS displays the fan status correctly for all fans, so all fans are connected to the sensors chip. However, there are only three fans listed in/sys/devices/platform/i2c-1/1-0290.
On the S2885 (not your model), 2 fans are handled by the w83627hf, and 4 others by an adt7463. I see that the S2882 has an adm1027, maybe this is the chip that handles your 3 others fans ?
Signature · 2 lines
Marc Bevand http://www.epita.fr/~bevand_m Computer Science School EPITA - System, Network and Security Dept.
Jan Kasprzak a écrit le 19.04.2004 14:01:
Quoted 7 lines
I have two systems with Tyan S2882 boards (K8S Pro). The sensors chip is
Winbond w83627hf according to the mainboard documentation. The w83627hf driver can read values from the sensors, but apparently not all values. The board has six fan connectors (two labeled CPU1 fan and CPU2 fan, and four
chassis fans). BIOS displays the fan status correctly for all fans, so all
fans are connected to the sensors chip. However, there are only three fans
listed in/sys/devices/platform/i2c-1/1-0290.
Probably unrelated to your problem, but isn't there a typo in drivers/i2c/chips/Kconfig ? maybe patch below ?
--
Fabian
i2c/chips/Kconfig Mon Apr 19 15:23:48 2004 renamed from i2c/chips/Kconfig.orig Fri Apr 16 11:12:17 2004 +1 -1
@@ -158,7 +158,7 @@ will be called via686a. config SENSORS_W83781D - tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F" + tristate "Winbond W83781D, W83782D, W83783S, W83682HF, Asus AS99127F" depends on I2C && EXPERIMENTAL select I2C_SENSOR help
A message that is not in the archive (sent off-list or not yet received): [email protected]
Fabian Fenaut wrote:
: Jan Kasprzak a écrit le 19.04.2004 14:01:
: >
: >I have two systems with Tyan S2882 boards (K8S Pro). The sensors chip is : >Winbond w83627hf according to the mainboard documentation. The w83627hf : >driver can read values from the sensors, but apparently not all values. The : >board has six fan connectors (two labeled CPU1 fan and CPU2 fan, and four : >chassis fans). BIOS displays the fan status correctly for all fans, so all : >fans are connected to the sensors chip. However, there are only three fans : >listed in /sys/devices/platform/i2c-1/1-0290.
:
:
: Probably unrelated to your problem, but isn't there a typo in
: drivers/i2c/chips/Kconfig ? maybe patch below ?
:
Yes, I had CONFIG_SENSORS_W83781D=y. I have recompiled withCONFIG_SENSORS_W83627HF=y and without CONFIG_SENSORS_W83781D, but the new kernel still can see only three fans.
-Yenya
Signature · 5 lines
| Jan "Yenya" Kasprzak <kas at {fi.muni.cz - work | yenya.net - private}> |
| GPG: ID 1024/D3498839 Fingerprint 0D99A7FB206605D7 8B35FCDE05B18A5E |
| http://www.fi.muni.cz/~kas/ Czech Linux Homepage: http://www.linux.cz/ |
Any compiler or language that likes to hide things like memory allocations
behind your back just isn't a good choice for a kernel. --Linus Torvalds