Skip to contentSkip to conversation

2.6.5, 2.6.6-rc2 sluggish interrupts

DISCUSSION Justin Pryzby 1 participant 1 message Apr 21, 2004

lore
Share & tools
lore
#0 lore raw

I noticed this first with Linux 2.6.5 (but not with 2.6.2) and also now with 2.6.6-rc2. The machine responds very slugishly while excercizing one interrupt when another interrupt happens. Ex. I'm circling the mouse pointer around the screen, and suddenly the hard drive decides to sync, or some such. The pointer then freezes for at least a half-second. It affects the keyboard too. (Though, presumably, it could also be a display issue). I notice myself losing alot of keystrokes as a result of this (I don't know what that means about the problem..) I don't know enough to say that this is about interrupts, but take a look:

	pryzbyj@andromeda:~$ cat /proc/interrupts 
		   CPU0       
	  0:    3835408          XT-PIC  timer
	  1:       9797          XT-PIC  i8042
	  2:          0          XT-PIC  cascade
	  5:          0          XT-PIC  Maestro3
	  7:          1          XT-PIC  parport0
	  8:          4          XT-PIC  rtc
	  9:          1          XT-PIC  acpi
	 11:     310777          XT-PIC  yenta, yenta, uhci_hcd, eth0, r128@PCI:1:0:0
	 12:      10454          XT-PIC  i8042
	 14:      11802          XT-PIC  ide0
	 15:         17          XT-PIC  ide1
	NMI:          0 
	LOC:          0 
	ERR:          0
	MIS:          0

I don't recall seeing that r128@PCI:1:0:0 entry there before (I haven't changed hardware, I've been using the console framebuffer for a while, AGP, DRM have always been on). And it seems to be making lots of noise (though I don't know that that's wrong). I do know there's a general problem though - sometimes it feels like I'm using a remote machine when I'm not.

It feels to me like it always happens when the disk is accessed (possibly just because I can _hear_ that), and it seems like it happens when the disk hasn't been used in a while.

Please Cc: me.

Justin