neofb: blanking patch done

@@ -1320,27 +1320,34 @@
 /*
  *    (Un)Blank the display.
  */
-static int neofb_blank(int blank, struct fb_info *info)
+static int neofb_blank(int blank_mode, struct fb_info *info)
 {
+	struct neofb_par *par = (struct neofb_par *)info->par;
+	int seqflags, lcdflags, dpmsflags, reg;
+
 	/*
-	 *  Blank the screen if blank_mode != 0, else unblank. If
-	 *  blank == NULL then the caller blanks by setting the CLUT
-	 *  (Color Look Up Table) to all black. Return 0 if blanking
-	 *  succeeded, != 0 if un-/blanking failed due to e.g. a
-	 *  video mode which doesn't support it. Implements VESA
-	 *  suspend and powerdown modes on hardware that supports
-	 *  disabling hsync/vsync:
-	 *    blank_mode == 2: suspend vsync
-	 *    blank_mode == 3: suspend hsync
-	 *    blank_mode == 4: powerdown
+	 *  Blank the screen if blank_mode != 0, else unblank.
+	 *  Return 0 if blanking succeeded, != 0 if un-/blanking failed due to
+	 *  e.g. a video mode which doesn't support it. Implements VESA suspend
+	 *  and powerdown modes for monitors, and backlight control on LCDs.
+	 *    blank_mode == 0: unblanked (backlight on)
+	 *    blank_mode == 1: blank (backlight on)
+	 *    blank_mode == 2: suspend vsync (backlight off)
+	 *    blank_mode == 3: suspend hsync (backlight off)
+	 *    blank_mode == 4: powerdown (backlight off)
 	 *
-	 *  wms...Enable VESA DMPS compatible powerdown mode
+	 *  wms...Enable VESA DPMS compatible powerdown mode
 	 *  run "setterm -powersave powerdown" to take advantage
 	 */
 
-	switch (blank) {
+	switch (blank_mode) {
 	case 4:		/* powerdown - both sync lines down */
+		seqflags = VGA_SR01_SCREEN_OFF;	/* Disable sequencer */
+		lcdflags = 0;			/* LCD off */
+		dpmsflags = NEO_GR01_SUPPRESS_HSYNC |
+			    NEO_GR01_SUPPRESS_VSYNC;
 #ifdef CONFIG_TOSHIBA
+		/* Do we still need this? */
 		/* attempt to turn off backlight on toshiba; also turns off external */
 		{
 			SMMRegisters regs;

@@ -1353,13 +1360,26 @@
 #endif
 		break;
 	case 3:		/* hsync off */
+		seqflags = VGA_SR01_SCREEN_OFF;	/* Disable sequencer */
+		lcdflags = 0;			/* LCD off */
+		dpmsflags = NEO_GR01_SUPPRESS_HSYNC;
 		break;
 	case 2:		/* vsync off */
-		break;
-	case 1:		/* just software blanking of screen */
-		break;
-	default:		/* case 0, or anything else: unblank */
+		seqflags = VGA_SR01_SCREEN_OFF;	/* Disable sequencer */
+		lcdflags = 0;			/* LCD off */
+		dpmsflags = NEO_GR01_SUPPRESS_VSYNC;
+		break;
+	case 1:		/* just blank screen (backlight stays on) */
+		seqflags = VGA_SR01_SCREEN_OFF;	/* Disable sequencer */
+		lcdflags = par->PanelDispCntlReg1 & 0x02; /* LCD normal */
+		dpmsflags = 0;			/* no hsync/vsync suppression */
+		break;
+	case 0:		/* unblank */
+		seqflags = 0;			/* Enable sequencer */
+		lcdflags = par->PanelDispCntlReg1 & 0x02; /* LCD normal */
+		dpmsflags = 0x00;	/* no hsync/vsync suppression */
 #ifdef CONFIG_TOSHIBA
+		/* Do we still need this? */
 		/* attempt to re-enable backlight/external on toshiba */
 		{
 			SMMRegisters regs;

@@ -1371,7 +1391,20 @@
 		}
 #endif
 		break;
+	default:	/* Anything else we don't understand; return 1 to tell
+			 * fb_blank we didn't actually do anything */
+		return 1;
 	}
+
+	neoUnlock();
+	reg = (vga_rseq(NULL, 0x01) & ~0x20) | seqflags;
+	vga_wseq(NULL, 0x01, reg);
+	reg = (vga_rgfx(NULL, 0x20) & ~0x02) | lcdflags;
+	vga_wgfx(NULL, 0x20, reg);
+	reg = (vga_rgfx(NULL, 0x01) & ~0xF0) | 0x80 | dpmsflags;
+	vga_wgfx(NULL, 0x01, reg);
+	neoLock(&par->state);
+
 	return 0;
 }
 

@@ -69,6 +69,9 @@
 #define NEO_ICON128_ENABLE	0x0000000C
 #define NEO_ICON_BLANK		0x00000010
 
+#define NEO_GR01_SUPPRESS_VSYNC 0x10
+#define NEO_GR01_SUPPRESS_HSYNC 0x20
+
 #ifdef __KERNEL__
 
 #ifdef NEOFB_DEBUG