root cause of VFS: Cannot open root device "LABEL=/" or unknown-block(0,0)
'make install' on the Fedora systems will set grub up to use an initrd. If you do this with a Linus 2.6 kernel, you will often see this error when trying to use the initrd:
VFS: Cannot open root device "LABEL=/" or unknown-block(0,0) Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on unknown-block(0,0)
The most common advice given is to change your grub entry to something like root=/dev/hda2.
What most of the other posts on this topic don't include is the preceeding messages:
kernel: checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
kernel: Freeing initrd memory: 98k freed
kernel: RAMDISK: Compressed image found at block 0
kernel: RAMDISK: incomplete write (-28 != 32768) 4194304
The root of the problem is that the default ramdisk size of 4096 is not big enough for the initrd used on Fedora. I presume the same problem exists on other systems.
Perhaps the default ramdisk size (CONFIG_BLK_DEV_RAM_SIZE) on the linus kernels could be increased to 8192.
cheers
-mark
Signature · 2 lines
Drugs are for losers. And hypnosis is for losers with big weird eyebrows. - Fry