Skip to contentSkip to conversation

BUG: might_sleep in /proc/swaps code

DISCUSSION Tim Hockin 2 participants 4 messages Apr 29, 2004

Subsystems (2)
lore
Share & tools
lore

Tim Hockin

author
#0 lore raw

Testing some othe rwork, totally unrelated, we added a might_sleep() to mntput(). It turned up this:

Debug: sleeping function called from invalid context at include/linux/mount.h:82
in_atomic():1, irqs_disabled():0

Call Trace:
 [<c012378f>] __might_sleep+0xab/0xcb
 [<c018787c>] d_path+0x171/0x272
 [<c018ff50>] seq_path+0x4b/0xf4
 [<c0165b12>] swap_show+0x3d/0x110
 [<c018f87d>] seq_read+0xa8/0x31b
 [<c015aa83>] do_brk+0x14f/0x21c
 [<c0168fae>] vfs_read+0xaf/0x119
 [<c0169224>] sys_read+0x3f/0x5d
 [<c010b4e1>] sysenter_past_esp+0x52/0x71

* /proc/swaps uses seq_file code, calling seq_path() with swaplock held
* seq_path() calls d_path()
* d_path() calls mntput() which might_sleep()

Is this worth trying to solve?

Signature · 4 lines
Tim Hockin
Sun Microsystems, Linux Software Engineering
[email protected]
All opinions are my own, not Sun's
#1 lore raw
Quoted 5 lines · Tim Hockin

* /proc/swaps uses seq_file code, calling seq_path() with swaplock held
* seq_path() calls d_path()
* d_path() calls mntput() which might_sleep()

Is this worth trying to solve?

Hrm... Yes, it is - we could have chroot(2) called from another thread while traversing the path to current root and have e.g. umount -l trigger final umount when d_path() is finished.

Note that we have another blocking function called there anyway - dput() will happily block under similar conditions (s/umount -l/rm/).

Lovely... So we need yet another semaphore in swapfile.c (we can't turn swaplock into semaphore *and* can't reuse swaps_bdev_sem, since dput() et.al. are not just blocking but can cause any IO and memory allocations).

I'll try to put together something not too revolting; will post the patch in a followup...

#2 lore raw
Quoted 14 lines · On Thu, Apr 29, 2004 at 01:53:35AM +0100…
Quoted 5 lines · Tim Hockin

* /proc/swaps uses seq_file code, calling seq_path() with swaplock held
* seq_path() calls d_path()
* d_path() calls mntput() which might_sleep()

Is this worth trying to solve?

Hrm... Yes, it is - we could have chroot(2) called from another thread while traversing the path to current root and have e.g. umount -l trigger final umount when d_path() is finished.

Note that we have another blocking function called there anyway - dput() will happily block under similar conditions (s/umount -l/rm/).

Quoted 6 lines

Lovely... So we need yet another semaphore in swapfile.c (we can't turn swaplock into semaphore *and* can't reuse swaps_bdev_sem, since dput() et.al. are not just blocking but can cause any IO and memory allocations).

I'll try to put together something not too revolting; will post the patch in a followup...

OK, here comes. New semaphore protecting insertions/removals in the set of swap components + switch of ->start()/->stop() to the same semaphore [fixes deadlocks] + trivial cleanup of ->next().

See if it works for you...

mm/swapfile.c +10 -4
diff -urN RC6-rc3/mm/swapfile.c RC6-rc3-current/mm/swapfile.c
@@ -45,6 +45,8 @@
 
 struct swap_info_struct swap_info[MAX_SWAPFILES];
 
+static DECLARE_MUTEX(swapon_sem);
+
 /*
  * Array of backing blockdevs, for swap_unplug_fn.  We need this because the
  * bdev->unplug_fn can sleep and we cannot hold swap_list_lock while calling
@@ -1158,6 +1160,7 @@
 		swap_list_unlock();
 		goto out_dput;
 	}
+	down(&swapon_sem);
 	down(&swap_bdevs_sem);
 	swap_list_lock();
 	swap_device_lock(p);
@@ -1172,6 +1175,7 @@
 	swap_list_unlock();
 	remove_swap_bdev(p->bdev);
 	up(&swap_bdevs_sem);
+	up(&swapon_sem);
 	vfree(swap_map);
 	if (S_ISBLK(mapping->host->i_mode)) {
 		struct block_device *bdev = I_BDEV(mapping->host);
@@ -1197,7 +1201,7 @@
 	int i;
 	loff_t l = *pos;
 
-	swap_list_lock();
+	down(&swapon_sem);
 
 	for (i = 0; i < nr_swapfiles; i++, ptr++) {
 		if (!(ptr->flags & SWP_USED) || !ptr->swap_map)
@@ -1212,9 +1216,9 @@
 static void *swap_next(struct seq_file *swap, void *v, loff_t *pos)
 {
 	struct swap_info_struct *ptr = v;
-	void *endptr = (void *) swap_info + nr_swapfiles * sizeof(struct swap_info_struct);
+	struct swap_info_struct *endptr = swap_info + nr_swapfiles;
 
-	for (++ptr; ptr < (struct swap_info_struct *) endptr; ptr++) {
+	for (++ptr; ptr < endptr; ptr++) {
 		if (!(ptr->flags & SWP_USED) || !ptr->swap_map)
 			continue;
 		++*pos;
@@ -1226,7 +1230,7 @@
 
 static void swap_stop(struct seq_file *swap, void *v)
 {
-	swap_list_unlock();
+	up(&swapon_sem);
 }
 
 static int swap_show(struct seq_file *swap, void *v)
@@ -1513,6 +1517,7 @@
 	if (error)
 		goto bad_swap;
 
+	down(&swapon_sem);
 	down(&swap_bdevs_sem);
 	swap_list_lock();
 	swap_device_lock(p);
@@ -1541,6 +1546,7 @@
 	swap_list_unlock();
 	install_swap_bdev(p->bdev);
 	up(&swap_bdevs_sem);
+	up(&swapon_sem);
 	error = 0;
 	goto out;
 bad_swap:
author
#3 lore raw
Quoted 5 lines · On Thu, Apr 29, 2004 at 03:03:09AM +0100…

OK, here comes. New semaphore protecting insertions/removals in the set of swap components + switch of ->start()/->stop() to the same semaphore [fixes deadlocks] + trivial cleanup of ->next().

See if it works for you...

Well, it stops bitching about might_sleep(), so it solves the obvious problems. I'm not in a position to comment about the other complexities of swapfile.c, so I'll take it on faith that you got it right. :)

Thanks
Tim