Skip to contentSkip to conversation

HCI RESET with CSR

Bluez-devel Nicholas A. Preyss 3 participants 4 messages Apr 30, 2004 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

Hi,

i am a bit curious whether anyone else experiencing the problem that the dongle doesn't answer after the HCI_RESET command was issued. In the Changelog of 2.6.4-rc3 is a note about this problem with CSR chip and firmware prior 12.X. But I still see this problem with 16.4.

nicholas

-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

#1 lore raw

Hi nicholas,

do you have this problem every time or just sporadic? I noticed this problem mostly while using usb-hubs. A autoclean of the usb kernel-module with modprobe -k [your usb module] helps in this case.

Greetings

Andy

Quoted 10 lines · On Fri, 30 Apr 2004 14:23:51 +0200 "Nicholas A. Preyss" <[email protected]> wrote:

Hi,

i am a bit curious whether anyone else experiencing the problem that the dongle doesn't answer after the HCI_RESET command was issued. In the Changelog of 2.6.4-rc3 is a note about this problem with CSR chip and firmware prior 12.X. But I still see this problem with 16.4.

nicholas

Quoted 9 lines

-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

#2 lore raw
Quoted 3 lines · Andreas Gaufer

do you have this problem every time or just sporadic? I noticed this problem mostly while using usb-hubs. A autoclean of the usb kernel-module with modprobe -k [your usb module] helps in this case.

Everytimewith 3 different USB dongles, with hub and without. I fix it, with just plugging the dongle out and in again.

nicholas

-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

#3 lore raw
In reply to Andreas Gaufer

Hi,
I also had problems with my acer dongle (hci 16.4), after a hci reset, the chip remained in an undefined state. I have implemented a hard reset utility (using the csr docs), btw, that I am willing to share (haven't packed into a tar.gz yet, though).

Simon

Quoted 46 lines · Andreas Gaufer

Hi nicholas,

do you have this problem every time or just sporadic? I noticed this problem mostly while using usb-hubs. A autoclean of the usb kernel-module with modprobe -k [your usb module] helps in this case.

Greetings

Andy

Quoted 10 lines · On Fri, 30 Apr 2004 14:23:51 +0200 "Nicholas A. Preyss" <[email protected]> wrote:

Hi,

i am a bit curious whether anyone else experiencing the problem that the dongle doesn't answer after the HCI_RESET command was issued. In the Changelog of 2.6.4-rc3 is a note about this problem with CSR chip and firmware prior 12.X. But I still see this problem with 16.4.

nicholas

Quoted 10 lines

-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel

Signature · 19 lines
_______________________________________________________________________
Dr. Simon Vogl
Institut für Pervasive Computing, Johannes Kepler Universität Linz
Altenberger Straße 69, A-4040 Linz, Austria

Tel: +43 732 2468-8517, Fax: +43 732 2468-8426
mailto: [email protected],  http://www.soft.uni-linz.ac.at/




-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
_______________________________________________
Bluez-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-devel