Skip to contentSkip to conversation

Attempts on the ESS-1869 card

DISCUSSION Tom Watson 2 participants 3 messages Feb 27, 2004 – May 3, 2004 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

Tom Watson

author
#1 lore raw

The documentation seems to imply sound blaster compatable as well. So I tried that driver, as suggested (thanks!) and got a similar result:
"...snd-sb16.o: init_module: No such device"
"Hint..."

Oh, well. Any new ideas?? Does anyone have experience with this laptop and its sound card??

...Thanks again

Quoted 38 lines · --- James Courtier-Dutton

Looks like a Sound Blaster compatible.
Try
modprobe snd-sb16 enable=1 isapnp=0 port=0x0220 mpu_port=0x330 irq=5 dma8=1 dma16=5

Cheers
James

Quoted 2 lines · Tom Watson

Ah, a new card to try...
This time it is an Ensonic ESS-1869 that is built into an older

Compaq

Quoted 1 line

laptop (Armada 3500). When I put in the "setup" disk, it reports

that

Quoted 10 lines

the sound card has the following I/O stuff:
IRQ 5
DMA 1
DMA 5

ports at 0x0220 thru 0x022F   (16 ports)
ports at 0x0388 thru 0x038B   (4 ports)
ports at 0x0330 thru 0x0331   (2 ports)

some other port range at 0x0250 thru 0x0257 (8 ports).

In reading the driver I see that "port" reserves 16, "fm_port"

reserves

Quoted 3 lines

4, and "mpu_port" reserves 2.

Being a "nice guy" I attempt to load the module with insmod, and

the

Quoted 4 lines

file "modules.conf" has:
...
alias snd-card-0 snd-es18xx
options snd-es18xx id="first" enable=1 dma1=1 dma2=5 irq=5

port=0x220 \

Quoted 3 lines
   fm_port=0x338 mpu_port=0x330

...

Quoted 15 lines
Quoted 2 lines

But all is not well as I get an error upon doing an insmod:
.../es18xx.c:2256: ESS AudioDrive ES18xx soundcard not found or

device

Quoted 4 lines

busy.

Am I missing something simple to get this thing working?? From the look of things, I should have all the stuff working. I even

attempted

Quoted 7 lines

to try an ISAPNP, but that didn't appear to work either.

Any better ideas from the group.

...Thanks

=====

=====

Signature · 14 lines
Tom Watson
[email protected]

__________________________________
Do you Yahoo!?
Get better spam protection with Yahoo! Mail.
http://antispam.yahoo.com/tools


-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
author
#2 lore raw

Re: Attempts on the ESS-1869 card (one more time)

In reply to a message not in the archive

Well, I've gone to another Compaq laptop. The previous one I had to resort to OSS (yuck) drivers and send it on its way. This laptop is one I'm going to use, so I'd like to get ALSA working on it.

So... I've loaded ALSA and put the following in 'modules.conf':
alias char-major-116 snd
alias snd-card-0 snd-es18xx
options snd-es18xx index=1 id=1 enable=1 isapnp=0 port=0x220 ... mpu_port=0x330 fm_port=0x338 irq=5 dma1=1 dma2=0

(please excuse the line wraps)

But alas, nothing works. I even tried using the sound blaster stuff mentioned in the other part of this email (nope, doesn't work either).

So, what IS the deal. This ought to work. I'm trying to do this on a Compaq Presario 1244, Alsa V 1.0.3, Kernel 2.4.20 (RH-9).

Quoted 45 lines · --- James Courtier-Dutton

Looks like a Sound Blaster compatible.
Try
modprobe snd-sb16 enable=1 isapnp=0 port=0x0220 mpu_port=0x330 irq=5 dma8=1 dma16=5

Cheers
James

Quoted 2 lines · Tom Watson

Ah, a new card to try...
This time it is an Ensonic ESS-1869 that is built into an older

Compaq

Quoted 1 line

laptop (Armada 3500). When I put in the "setup" disk, it reports

that

Quoted 10 lines

the sound card has the following I/O stuff:
IRQ 5
DMA 1
DMA 5

ports at 0x0220 thru 0x022F   (16 ports)
ports at 0x0388 thru 0x038B   (4 ports)
ports at 0x0330 thru 0x0331   (2 ports)

some other port range at 0x0250 thru 0x0257 (8 ports).

In reading the driver I see that "port" reserves 16, "fm_port"

reserves

Quoted 3 lines

4, and "mpu_port" reserves 2.

Being a "nice guy" I attempt to load the module with insmod, and

the

Quoted 4 lines

file "modules.conf" has:
...
alias snd-card-0 snd-es18xx
options snd-es18xx id="first" enable=1 dma1=1 dma2=5 irq=5

port=0x220 \

Quoted 5 lines
   fm_port=0x338 mpu_port=0x330

...

But all is not well as I get an error upon doing an insmod:
.../es18xx.c:2256: ESS AudioDrive ES18xx soundcard not found or

device

Quoted 4 lines

busy.

Am I missing something simple to get this thing working?? From the look of things, I should have all the stuff working. I even

Quoted 12 lines

attempted

Quoted 7 lines

to try an ISAPNP, but that didn't appear to work either.

Any better ideas from the group.

...Thanks

=====

Signature · 2 lines
Tom Watson         Generic short signature
[email protected]     (I'm at home now)

=====

Signature · 17 lines
Tom Watson
[email protected]


	
		
__________________________________
Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs  
http://hotjobs.sweepstakes.yahoo.com/careermakeover 


-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. 
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
#3 lore raw

Re: Attempts on the ESS-1869 card (one more time)

Quoted 8 lines · Tom Watson

Well, I've gone to another Compaq laptop. The previous one I had to resort to OSS (yuck) drivers and send it on its way. This laptop is one I'm going to use, so I'd like to get ALSA working on it.

So... I've loaded ALSA and put the following in 'modules.conf':
alias char-major-116 snd
alias snd-card-0 snd-es18xx
options snd-es18xx index=1

This is sound card 0, so use index=0.

Quoted 1 line

id=1

The id cannot be a number. But ALSA has a sensible default anyway, so you don't need to specify this.

Quoted 1 line

fm_port=0x338

fm_port=0x388

Quoted 1 line

dma1=1 dma2=0

Does your card really use 1/0 and not 0/1?
(To disable a dma channel, specify -1.)

Quoted 1 line

But alas, nothing works.

What exactly doesn't work? Error messages when trying to load the driver? No sound? Green demons coming out of your speakers? ;-)

HTH
Clemens

-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click