Skip to contentSkip to conversation

freezes with cdrecord

DISCUSSION Alexander ZVYAGIN 3 participants 4 messages May 4, 2004

lore
Share & tools
lore
#0 lore raw

Hello,

I use DVD+RW with 2.6.5 kernel. Very often my computer freezes for ~10-20 seconds when a disk is cleaning. I can move my mouse pointer, and switch between some windows, but that is all. Command prompt is not responding as well. For me it looks like the filesystem is locked.

During the burning process everything is fine and smooth. But very close to the end, the computer freezes again for ~10-20 seconds. It happens in 'fixating' stage of the writing process.

The created disks are fine, and computer runs OK. I use k3b fronted to cdrecord 2.1a25.

Any explanations why those freezes happen?

With best wishes,
Alexander.

#1 lore raw

Hi Alexander :)

* Alexander ZVYAGIN <[email protected]> dixit:

Quoted 4 lines

During the burning process everything is fine and smooth. But very close to the end, the computer freezes again for ~10-20 seconds. It happens in 'fixating' stage of the writing process.

[...]

Quoted 1 line

Any explanations why those freezes happen?

It maybe has to do with the lack of zerocopy support (no DMA
transfer) in certain parts of the process. For example, under 2.4.x you don't have zerocopy when writing audio, and maybe during fixation DMA is not used, neither. I'm not an expert in this issue, but I think that it may be the cause.

Which kernel are you using? Which kind of recorder?

Raúl Núñez de Arenas Coronado

Signature · 2 lines
Linux Registered User 88736
http://www.pleyades.net & http://raul.pleyades.net/
#2 lore raw

Sorry, I did not attach these files...

Quoted 21 lines · DervishD

Hi Alexander :)

* Alexander ZVYAGIN <[email protected]> dixit:

Quoted 4 lines

During the burning process everything is fine and smooth. But very close to the end, the computer freezes again for ~10-20 seconds. It happens in 'fixating' stage of the writing process.

[...]

Quoted 1 line

Any explanations why those freezes happen?

It maybe has to do with the lack of zerocopy support (no DMA
transfer) in certain parts of the process. For example, under 2.4.x you don't have zerocopy when writing audio, and maybe during fixation DMA is not used, neither. I'm not an expert in this issue, but I think that it may be the cause.

Which kernel are you using? Which kind of recorder?

Raúl Núñez de Arenas Coronado

#3 lore raw
In reply to Alexander ZVYAGIN
Quoted 14 lines · Alexander ZVYAGIN

Hello,

I use DVD+RW with 2.6.5 kernel. Very often my computer freezes for ~10-20 seconds when a disk is cleaning. I can move my mouse pointer, and switch between some windows, but that is all. Command prompt is not responding as well. For me it looks like the filesystem is locked.

During the burning process everything is fine and smooth. But very close to the end, the computer freezes again for ~10-20 seconds. It happens in 'fixating' stage of the writing process.

Quoted 4 lines

The created disks are fine, and computer runs OK. I use k3b fronted to cdrecord 2.1a25.

Any explanations why those freezes happen?

It's because you have other devices on the channel where your recorder is, and they are frozen when the finalize runs. So move devices around, or live with it... There's nothing the kernel can do to help you.

Signature · 1 line
Jens Axboe