Skip to contentSkip to conversation

Can't Print

DISCUSSION Peter H. 1 participant 1 message May 9, 2004

lore
Share & tools
lore

Peter H.

author
#0 lore raw

Thanks for any help! I solved the problem. I installed the kernel of slackware9.1 2.4.22 and my good old Epson LX-800 came to live. This is not the first time this kernel 2.4.20-20.9 did mess-up things. How much time wasted by Richard and myself on account of an apparent defective kernel from Krud-Linux.
What did Ray say or similar, by his experience, with slackware most things work better and smoother. Darn true!

Quoted 11 lines · Peter

Hi,
I have made a new installation of RH9.0 2.4.20-20.9 where I have a parallel printer card. The system is now discovering the card.

Doing: "more /proc/pci" I am told that the printer card is using irq 5 and the io=0xd400. This is the first number to show. There are some more io.

Only to this io does the printer react, meaning it makes that sound when the print head moves somewhat and only giving this io will lpq give an information about the print queue. It is a dot matrix printer.

Quoted 8 lines

That printer react comes when I do: insmod parport_pc io=0x400 irq=5. After this lpq gives the usual information about the print queue. There is always an old queue around either as 'done' or now as an 'error too many tries'.

Now if I want to print something 'lpr file' the keyboard totally freezes and I have to do a dirty reboot.

Any help appreciated. -- Peter

-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs