Skip to contentSkip to conversation

flushrs and the backing store

DISCUSSION umut aymakoglu 2 participants 2 messages May 10, 2004

lore
Share & tools
lore
#0 lore raw

Hi -
Is there some kind of documentation that talks about what registers are saved in the backing store up to the current procedure after flushrs instruction and their layout/structure?

thanks,
Umut

__________________________________
Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs
http://hotjobs.sweepstakes.yahoo.com/careermakeover

#1 lore raw
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line · umut aymakoglu

Umut> Hi - Is there some kind of documentation that talks about what Umut> registers are saved in the backing store up to the current Umut> procedure after flushrs instruction and their
Umut> layout/structure?

Sure, the ASDM [1] does. As does my book (with better figures, IMHO... ;-) But really, it's quite simple: flushrs writes back all stacked registers in the dirty partition. The backing store format consists of naturally-aligned 64-word blocks (512 bytes), with the first 63 words use to store register values and the 64-th word use to store the NaT bits of the first 63 words.

	--david

[1] http://www.intel.com/design/itanium/manuals/iiasdmanual.htm