Skip to contentSkip to conversation

status of powermac sound?

DISCUSSION Niklas Werner 6 participants 8 messages May 11, 2004 – May 13, 2004

lore
Share & tools
lore
#0 lore raw

Hi *,

is there any progress on the status of full support for the newer devices as snapper, etc (in the AlBooks,..). I'm running the 2.6.5 benh-kernel from bitkeeper and basically the sound only works reliably when using the oss emulation.

I can remember a short time under 2.6.* when alsa output actually worked, though...

If you need a guinea pig, I will gladly test patches on my AlBook running gentoo.

Have fun*

Niklas

-------------------------------------------------------
This SF.Net email is sponsored by Sleepycat Software
Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO.
http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3

#1 lore raw
Quoted 6 lines · On 11-May-2004 Niklas Werner wrote:

Hi *,

is there any progress on the status of full support for the newer devices as snapper, etc (in the AlBooks,..). I'm running the 2.6.5 benh-kernel from bitkeeper and basically the sound only works reliably when using the oss emulation.

I have a G4-MDD (snapper) and the last time I tested it the sound worked fine only if the buffer is a power of 2 and periods are an exact submultiple, otherwise it skips. Furthermore it tends to distort as soon as I raise the volume and it happes at a level lower than OSX. I'll do more testing if it can help.

--
Giuliano.

-------------------------------------------------------
This SF.Net email is sponsored by Sleepycat Software
Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO.
http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3

#2 lore raw
In reply to Niklas Werner
Quoted 8 lines · Niklas Werner

is there any progress on the status of full support for the newer devices as snapper, etc (in the AlBooks,..). I'm running the 2.6.5 benh-kernel from bitkeeper and basically the sound only works reliably when using the oss emulation.

I can remember a short time under 2.6.* when alsa output actually worked, though...

I have a

0 [Snapper ]: PMac Snapper - PowerMac Snapper
PowerMac Snapper (Dev 26) Sub-frame 0

in a TiBook IV, and it's been working better than OSS ever did for quite a while. My configuration is http://penguinppc.org/~daenzer/asound.conf

The only thing that bothers me is
https://bugtrack.alsa-project.org/alsa-bug/bug_view_advanced_page.php?bug_id=0000057, but I can live with it.

Signature · 10 lines
Earthling Michel Dänzer      |     Debian (powerpc), X and DRI developer
Libre software enthusiast    |   http://svcs.affero.net/rm.php?r=daenzer



-------------------------------------------------------
This SF.Net email is sponsored by Sleepycat Software
Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver
higher performing products faster, at low TCO.
http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3
#3 lore raw

At Wed, 12 May 2004 12:31:54 +0200,

Quoted 13 lines · Michel Dänzer
Quoted 8 lines · Niklas Werner

is there any progress on the status of full support for the newer devices as snapper, etc (in the AlBooks,..). I'm running the 2.6.5 benh-kernel from bitkeeper and basically the sound only works reliably when using the oss emulation.

I can remember a short time under 2.6.* when alsa output actually worked, though...

I have a

Quoted 8 lines

0 [Snapper ]: PMac Snapper - PowerMac Snapper
PowerMac Snapper (Dev 26) Sub-frame 0

in a TiBook IV, and it's been working better than OSS ever did for quite a while. My configuration is http://penguinppc.org/~daenzer/asound.conf

The only thing that bothers me is
https://bugtrack.alsa-project.org/alsa-bug/bug_view_advanced_page.php?bug_id=0000057, but I can live with it.

sorry, forgot to answer BTS.
this bug might have been fixed in the recent CVS version (might be not :)

please give a try.

Takashi

-------------------------------------------------------
This SF.Net email is sponsored by Sleepycat Software
Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO.
http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3

#4 lore raw
Quoted 11 lines · Takashi Iwai

At Wed, 12 May 2004 12:31:54 +0200,

Quoted 3 lines · Michel Dänzer

The only thing that bothers me is
https://bugtrack.alsa-project.org/alsa-bug/bug_view_advanced_page.php?bug_id=0000057, but I can live with it.

sorry, forgot to answer BTS.
this bug might have been fixed in the recent CVS version (might be not :)

please give a try.

Still the same problem unfortunately (I assume the potential fix was in the alsa-kernel or alsa-driver CVS module?).

Signature · 10 lines
Earthling Michel Dänzer      |     Debian (powerpc), X and DRI developer
Libre software enthusiast    |   http://svcs.affero.net/rm.php?r=daenzer



-------------------------------------------------------
This SF.Net email is sponsored by: SourceForge.net Broadband
Sign-up now for SourceForge Broadband and get the fastest
6.0/768 connection for only $19.95/mo for the first 3 months!
http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click
#5 lore raw
In reply to Michel Dänzer
Quoted 10 lines · Michel Dänzer
Quoted 8 lines · Niklas Werner

is there any progress on the status of full support for the newer devices as snapper, etc (in the AlBooks,..). I'm running the 2.6.5 benh-kernel from bitkeeper and basically the sound only works reliably when using the oss emulation.

I can remember a short time under 2.6.* when alsa output actually worked, though...

Quoted 7 lines

I have a

0 [Snapper ]: PMac Snapper - PowerMac Snapper
PowerMac Snapper (Dev 26) Sub-frame 0

in a TiBook IV, and it's been working better than OSS ever did for quite a while. My configuration is http://penguinppc.org/~daenzer/asound.conf

Using this on my albook. I get strange distorsions and a too low pitch when playing a dvd or divx with 48Khz audio.

For the record, the hardware is:
0 [Snapper ]: PMac Snapper - PowerMac Snapper
PowerMac Snapper (Dev 35) Sub-frame 0

Sjoerd

Signature · 8 lines
The savior becomes the victim.


-------------------------------------------------------
This SF.Net email is sponsored by Sleepycat Software
Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver
higher performing products faster, at low TCO.
http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3
#6 lore raw
Quoted 6 lines · Sjoerd Simons

Using this on my albook. I get strange distorsions and a too low pitch when playing a dvd or divx with 48Khz audio.

For the record, the hardware is:
0 [Snapper ]: PMac Snapper - PowerMac Snapper
PowerMac Snapper (Dev 35) Sub-frame 0

yep, exactly. And normally using alsa directly does not work, and if it does it shows the same effects...

mplayer with -ao alsa1x yields:

alsa-play: unknown status, trying to reset soundcard

works fine with -ao oss
xmms doesn't work with alsa-plugin at all (well, OK, who cares... xmms seems to have died anyways...)

astonishingly jackd normally works. Is there an option to force the driver to always use a buffer size of a power of 2?

Have fun*

Niklas

-------------------------------------------------------
This SF.Net email is sponsored by Sleepycat Software
Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver higher performing products faster, at low TCO.
http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3

#7 lore raw
Quoted 12 lines · Niklas Werner
Quoted 6 lines · Sjoerd Simons

Using this on my albook. I get strange distorsions and a too low pitch when playing a dvd or divx with 48Khz audio.

For the record, the hardware is:
0 [Snapper ]: PMac Snapper - PowerMac Snapper
PowerMac Snapper (Dev 35) Sub-frame 0

yep, exactly. And normally using alsa directly does not work, and if it does it shows the same effects...

Quoted 7 lines

mplayer with -ao alsa1x yields:

alsa-play: unknown status, trying to reset soundcard

works fine with -ao oss
xmms doesn't work with alsa-plugin at all (well, OK, who cares... xmms seems to have died anyways...)

rhythmbox (with gstreamer 0.8 backend) and gnomemeeting 1.0.2 both work fine with alsa directly here (vanilla 2.6.6 kernel). As long as the samplerate is 44100hz alsa works perfectly :)

Sjoerd

Signature · 11 lines
Since everything in life is but an experience perfect in being what it is,
having nothing to do with good or bad, acceptance or rejection, one may well
burst out in laughter.
		-- Long Chen Pa


-------------------------------------------------------
This SF.Net email is sponsored by Sleepycat Software
Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to deliver
higher performing products faster, at low TCO.
http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3