Skip to contentSkip to conversation

couldn't enable Enhanced SpeedStep

speedste-centrino Manuel Kasten 3 participants 5 messages May 23, 2004 – May 25, 2004

lore
Share & tools
lore
#0 lore raw

Hello,

speedstep-centrino won't load on my laptop running 2.6.6 :

$ cat /var/log/dmesg | grep speedstep
speedstep-centrino: found "Intel(R) Pentium(R) M processor 1500MHz": max
frequency: 1500000kHz
speedstep-centrino: couldn't enable Enhanced SpeedStep

Can anybody explain what's going on?

Thanks,
        Manuel Kasten

######   .config    ######
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_PROC_INTF=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_24_API=y CONFIG_CPU_FREQ_TABLE=y

#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
# CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set

#1 lore raw
Quoted 10 lines · Manuel Kasten

Hello,

speedstep-centrino won't load on my laptop running 2.6.6 :

$ cat /var/log/dmesg | grep speedstep
speedstep-centrino: found "Intel(R) Pentium(R) M processor 1500MHz": max
frequency: 1500000kHz
speedstep-centrino: couldn't enable Enhanced SpeedStep

Can anybody explain what's going on?

We poke a magic bit, and read it back to see if it stuck at the value we poked it. In your case it didn't for some reason.

/proc/cpuinfo please ?

Dave

#2 lore raw
In reply to Manuel Kasten
Quoted 10 lines · Manuel Kasten

Hello,

speedstep-centrino won't load on my laptop running 2.6.6 :

$ cat /var/log/dmesg | grep speedstep
speedstep-centrino: found "Intel(R) Pentium(R) M processor 1500MHz": max
frequency: 1500000kHz
speedstep-centrino: couldn't enable Enhanced SpeedStep

...

Quoted 4 lines

# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
# CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI is not set

Could you please try with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled? Sometimes, the BIOS would require that the OS take ownership of the performance stuff..

Cheers,

Signature · 4 lines
Bruno Ducrot

--  Which is worse:  ignorance or apathy?
--  Don't know.  Don't care.
#3 lore raw

Hello,

Quoted 3 lines

Could you please try with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled? Sometimes, the BIOS would require that the OS take ownership of the performance stuff..

I have done that already. The only change is, that he won't report "found: Intel(R) Pentium(R) M processor 1500MHz". The line with "couldn't enable Enhanced SpeedStep" remains unchanged.

MfG
Manuel Kasten

#4 lore raw

Hi,

Quoted 9 lines · Manuel Kasten

Hello,

Quoted 3 lines

Could you please try with CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI enabled? Sometimes, the BIOS would require that the OS take ownership of the performance stuff..

I have done that already. The only change is, that he won't report "found: Intel(R) Pentium(R) M processor 1500MHz". The line with "couldn't enable Enhanced SpeedStep" remains unchanged.

Could you please send me privately the output of acpidmp?

wget ftp://ftp.kernel.org//pub/linux/kernel/people/lenb/acpi/utils/pmtools-20031210.tar.bz2 tar xjvfp pmtools-20031210.tar.bz2
cd pmtools-20031210/acpidmp
make
sudo ./acpidmp > acpidmp.out
bzip2 acpidmp.out

Cheers,

Signature · 4 lines
Bruno Ducrot

--  Which is worse:  ignorance or apathy?
--  Don't know.  Don't care.