Skip to contentSkip to conversation

Open Source US-X2Y firmware

ANN Martin Langer 4 participants 9 messages May 27, 2004 – Jul 30, 2004

lore
Share & tools
lore
#0 lore raw

Hi,

if someone is interested in a free (I mean GPL) firmware for the Tascam US-X2Y devices I can offer an open source replacement for the second stage loader alsa-firmware/usx2yloader/tascam_loader.ihx. All three US-X2Y devices need this file. But I have only tried it out with an US-122 where it works.

Be careful. This software comes with ABSOLUTELY NO WARRANTY!

http://www.langerland.de/us122/usx2y-fw-0.1.tar.bz2

martin

Signature · 9 lines
                                     Living on earth may be expensive,
                   but it includes an annual free trip around the sun. 


-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. 
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
#1 lore raw

Am Donnerstag 27 Mai 2004 21:26 schrieb Martin Langer:

Quoted 7 lines

Hi,

if someone is interested in a free (I mean GPL) firmware for the Tascam US-X2Y devices I can offer an open source replacement for the second stage loader alsa-firmware/usx2yloader/tascam_loader.ihx. All three US-X2Y devices need this file. But I have only tried it out with an US-122 where it works.

does it here with an US-428 without any problem.
Good stuff!

Quoted 5 lines

Be careful. This software comes with ABSOLUTELY NO WARRANTY!

http://www.langerland.de/us122/usx2y-fw-0.1.tar.bz2

Thanks,
Karsten

-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click

#2 lore raw
In reply to Martin Langer

At Thu, 27 May 2004 21:26:22 +0200,

Quoted 4 lines · Martin Langer

Hi,

Quoted 8 lines

if someone is interested in a free (I mean GPL) firmware for the Tascam US-X2Y devices I can offer an open source replacement for the second stage loader alsa-firmware/usx2yloader/tascam_loader.ihx. All three US-X2Y devices need this file. But I have only tried it out with an US-122 where it works.

Be careful. This software comes with ABSOLUTELY NO WARRANTY!

http://www.langerland.de/us122/usx2y-fw-0.1.tar.bz2

shall i include this into alsa-firmware?
or should wait for a while until more debugging?

Takashi

-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click

#3 lore raw
Quoted 11 lines · Takashi Iwai

At Thu, 27 May 2004 21:26:22 +0200,

Quoted 9 lines · Martin Langer

Hi,

if someone is interested in a free (I mean GPL) firmware for the Tascam US-X2Y devices I can offer an open source replacement for the second stage loader alsa-firmware/usx2yloader/tascam_loader.ihx. All three US-X2Y devices need this file. But I have only tried it out with an US-122 where it works.

Quoted 5 lines
Quoted 3 lines

Be careful. This software comes with ABSOLUTELY NO WARRANTY!

http://www.langerland.de/us122/usx2y-fw-0.1.tar.bz2

shall i include this into alsa-firmware?

In which way should it be included?
- replacing the vendor fw file
- as alternate fw, maybe with a configure option like 'prefer-free-fw' or so

Another point is that MidiSportLoader.ihx is 100% identical with tascam_loader.ihx. Maybe midisport devices work with this loader too. But I have no possibility to test it. Then it would be better to remove the ezusb stuff from usx2yloader and create a new chip specific tree for all ez-usb devices. Or not?

Quoted 1 line

or should wait for a while until more debugging?

I guess some us224/midisport test would be nice. But on the other hand the loader core is built into the chip and my code is not much more than a few init lines.

martin

Signature · 9 lines
                                     Living on earth may be expensive,
                   but it includes an annual free trip around the sun. 


-------------------------------------------------------
This SF.Net email is sponsored by: Oracle 10g
Get certified on the hottest thing ever to hit the market... Oracle 10g. 
Take an Oracle 10g class now, and we'll give you the exam FREE.
http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
#4 lore raw
Quoted 21 lines · Martin Langer
Quoted 9 lines · Takashi Iwai

At Thu, 27 May 2004 21:26:22 +0200,

Quoted 6 lines · Martin Langer

if someone is interested in a free (I mean GPL) firmware for the Tascam US-X2Y devices I can offer an open source replacement for the second stage loader alsa-firmware/usx2yloader/tascam_loader.ihx. All three US-X2Y devices need this file. But I have only tried it out with an US-122 where it works.

shall i include this into alsa-firmware?

In which way should it be included?
- replacing the vendor fw file
- as alternate fw, maybe with a configure option like 'prefer-free-fw' or so

Another point is that MidiSportLoader.ihx is 100% identical with tascam_loader.ihx. Maybe midisport devices work with this loader too. But I have no possibility to test it. Then it would be better to remove the ezusb stuff from usx2yloader and create a new chip specific tree for all ez-usb devices. Or not?

Quoted 5 lines
Quoted 1 line

or should wait for a while until more debugging?

I guess some us224/midisport test would be nice. But on the other hand the loader core is built into the chip and my code is not much more than a few init lines.

Ok, now we know that us122, us224 and us428 are working. So I vote for replacing tascam_loader.ihx :)

Apropos Midisport: What about a free midisport firmware package? A combination of the gpl firmware by Lars Doelle and this loader. But perhaps this loader fails for midisport devices --- it's still untested, it's just an idea. On the other hand it looks like everybody is happy with the alternate loader from http://usb-midi-fw.sf.net --- file it under $0.02 ;)

martin

Signature · 9 lines
                                     Living on earth may be expensive,
                   but it includes an annual free trip around the sun. 


-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click
#5 lore raw

At Tue, 20 Jul 2004 23:15:39 +0200,

Quoted 23 lines · Martin Langer
Quoted 21 lines · Martin Langer
Quoted 9 lines · Takashi Iwai

At Thu, 27 May 2004 21:26:22 +0200,

Quoted 6 lines · Martin Langer

if someone is interested in a free (I mean GPL) firmware for the Tascam US-X2Y devices I can offer an open source replacement for the second stage loader alsa-firmware/usx2yloader/tascam_loader.ihx. All three US-X2Y devices need this file. But I have only tried it out with an US-122 where it works.

shall i include this into alsa-firmware?

In which way should it be included?
- replacing the vendor fw file
- as alternate fw, maybe with a configure option like 'prefer-free-fw' or so

Another point is that MidiSportLoader.ihx is 100% identical with tascam_loader.ihx. Maybe midisport devices work with this loader too. But I have no possibility to test it. Then it would be better to remove the ezusb stuff from usx2yloader and create a new chip specific tree for all ez-usb devices. Or not?

Quoted 8 lines
Quoted 5 lines
Quoted 1 line

or should wait for a while until more debugging?

I guess some us224/midisport test would be nice. But on the other hand the loader core is built into the chip and my code is not much more than a few init lines.

Ok, now we know that us122, us224 and us428 are working. So I vote for replacing tascam_loader.ihx :)

Great. Could you send a patch?

Takashi

-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click

#6 lore raw
Quoted 27 lines · Takashi Iwai

At Tue, 20 Jul 2004 23:15:39 +0200,

Quoted 25 lines · Martin Langer
Quoted 23 lines · Martin Langer
Quoted 9 lines · Takashi Iwai

At Thu, 27 May 2004 21:26:22 +0200,

Quoted 6 lines · Martin Langer

if someone is interested in a free (I mean GPL) firmware for the Tascam US-X2Y devices I can offer an open source replacement for the second stage loader alsa-firmware/usx2yloader/tascam_loader.ihx. All three US-X2Y devices need this file. But I have only tried it out with an US-122 where it works.

shall i include this into alsa-firmware?

In which way should it be included?
- replacing the vendor fw file
- as alternate fw, maybe with a configure option like 'prefer-free-fw' or so

Another point is that MidiSportLoader.ihx is 100% identical with tascam_loader.ihx. Maybe midisport devices work with this loader too. But I have no possibility to test it. Then it would be better to remove the ezusb stuff from usx2yloader and create a new chip specific tree for all ez-usb devices. Or not?

Quoted 1 line

or should wait for a while until more debugging?

Quoted 8 lines
Quoted 6 lines
Quoted 3 lines

I guess some us224/midisport test would be nice. But on the other hand the loader core is built into the chip and my code is not much more than a few init lines.

Ok, now we know that us122, us224 and us428 are working. So I vote for replacing tascam_loader.ihx :)

Great. Could you send a patch?

Sure. It's attached, but I'm still unsure: A patch for alsa-tools/usx2yloader or alsa-firmware/usx2yloader? Is it divided by license or by loader/firmware separation? I've choosen alsa-firmware/usx2yloader/src.

I guess many users will get trouble because they haven't yet installed a new version of as31 (v2.2). BTW, I haven't found any deb or rpm :(

Nevertheless the one and only as31 tarball I found is available here:
http://www.erazor-zone.de/ez/execute/explorer.php4?dir=..%2Fprojects%2Flinux%2Fas31%2F&view=small_icons

But it works!

martin

Signature · 2 lines
                                     Living on earth may be expensive,
                   but it includes an annual free trip around the sun. 
#7 lore raw
Quoted 2 lines · Martin Langer

I guess many users will get trouble because they haven't yet installed a new version of as31 (v2.2). BTW, I haven't found any deb or rpm :(

Then it might make sense to include either the loader binary or the assembler into the alsa-firmware package.
(http://www.pjrc.com/tech/8051/ says that AS31 is provided under the BSD license)

Clemens

-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click

#8 lore raw
Quoted 8 lines · Clemens Ladisch
Quoted 2 lines · Martin Langer

I guess many users will get trouble because they haven't yet installed a new version of as31 (v2.2). BTW, I haven't found any deb or rpm :(

Then it might make sense to include either the loader binary or the assembler into the alsa-firmware package.
(http://www.pjrc.com/tech/8051/ says that AS31 is provided under the BSD license)

I've tried out some versions of as31 and the code works with the latest
versions: 2.1, 2.2 and 2.2.1

Earlier versions including 2.0-beta3 from http://www.pjrc.com/tech/8051/
fail.

Including as31 into alsa-firmware is the wrong way IMO. Fixing assembler bugs shouldn't be the goal of alsa in the future. Also, the number of compiler tools will grow. Each card has a different chip and need different cross-compiling tools. And I believe in three years we have no longer cards without firmware.... perhaps five years ;-)

It looks like a general problem, because development tools for firmware files can be exotic, if they exist at all. Offering two packages firmware-bin and firmware-source sounds much better.

martin

Signature · 9 lines
                                     Living on earth may be expensive,
                   but it includes an annual free trip around the sun. 


-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on
Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now,
one more big change to announce. We are now OSTG- Open Source Technology
Group. Come see the changes on the new OSTG site. www.ostg.com