Skip to contentSkip to conversation

Autodetect problem w/ SCSI

DISCUSSION Sandro Dentella 3 participants 5 messages Jun 1, 2004 – Jun 2, 2004 MD RAID

lore
Share & tools
lore
#0 lore raw

I made plenty of RAID1 systems w/ ide disk: OK.
Now I tried a SCSI system and I can't make the kernel recognize the partition to make into an array. Of course partitions are 'fd': raid autodetect.

Kernel recognizes the scsi hw (aic7xxx compiled in), then starts "md: Autodetecting RAID arrays" that will just fail to find the arrays.

If I start from a live CD, I can "mdadm -A /dev/md0 /dev/sda6 /dev/sdb6" and the array starts and I can mount it.

Is there something peculiar of SCSI systems I'm just ignoring?

TYA

sandro
*:-)

I'm sorry to admit it's quite URGENT to me to get to a solution... this is a replacement for a customer after 4 ide disks failure in 5 months...

Signature · 3 lines
Sandro Dentella  *:-)
e-mail: [email protected] 
http://www.tksql.org                    TkSQL Home page - My GPL work
#1 lore raw

Can you send the exact command used to create the array, the raidtabs or mdadm.conf file and the fdisk -l listing of each drive thats part of the raid?

Quoted 24 lines · --- Sandro Dentella

I made plenty of RAID1 systems w/ ide disk: OK. Now I tried a SCSI system and I can't make the kernel recognize the partition
to make into an array. Of course partitions are 'fd': raid autodetect.

Kernel recognizes the scsi hw (aic7xxx compiled in), then starts
"md: Autodetecting RAID arrays" that will just fail to find the arrays.

If I start from a live CD, I can "mdadm -A /dev/md0 /dev/sda6 /dev/sdb6" and
the array starts and I can mount it.

Is there something peculiar of SCSI systems I'm just ignoring?

TYA

Quoted 21 lines

sandro
*:-)

I'm sorry to admit it's quite URGENT to me to get to a solution... this is a
replacement for a customer after 4 ide disks failure in 5 months...

Signature · 9 lines
Sandro Dentella  *:-)
e-mail: [email protected] 
http://www.tksql.org                    TkSQL Home
page - My GPL work
-
To unsubscribe from this list: send the line
"unsubscribe linux-raid" in
the body of a message to [email protected]
More majordomo info at 

http://vger.kernel.org/majordomo-info.html

__________________________________
Do you Yahoo!?
Friends. Fun. Try the all-new Yahoo! Messenger.
http://messenger.yahoo.com/

#2 lore raw
Quoted 3 lines · M K

Can you send the exact command used to create the array, the raidtabs or mdadm.conf file and the fdisk -l listing of each drive thats part of the raid?

I used mdadm w/ (approxymantely, it's a script "mdadm --create $Md -l1 -n2 $part $part2")

mdadm --create /dev/md/0 -l1 -n2 /dev/scsi/host0/bus0/target0/lun0/part6 /dev/scsi/host0/bus0/target1/lun0/part6

From a live CD after modprobe aic7xxx and "mdadm -A /dev/md4 /dev/sda1 /dev/sdb1" and "mdadm -A /dev/md0 /dev/sda6 /dev/sdb6"

####################################################
fdisk -l /dev/sda
root@argo-cd root # fdisk -l /dev/sda

Disk /dev/sda: 255 heads, 63 sectors, 2231 cylinders Units = cylinders of 16065 * 512 bytes

   Device Boot    Start       End    Blocks   Id  System
/dev/sda1             1         3     24066   fd  Linux raid autodetect
/dev/sda2             4      2231  17896410    f  Win95 Ext'd (LBA)
/dev/sda5             4        68    522081   fd  Linux raid autodetect
/dev/sda6            69       323   2048256   fd  Linux raid autodetect
/dev/sda7           324      2231  15325978+  fd  Linux raid autodetect

root@argo-cd root # fdisk -l /dev/sdb

Disk /dev/sdb: 255 heads, 63 sectors, 2231 cylinders Units = cylinders of 16065 * 512 bytes

   Device Boot    Start       End    Blocks   Id  System
/dev/sdb1             1         3     24066   fd  Linux raid autodetect
/dev/sdb2             4      2231  17896410    f  Win95 Ext'd (LBA)
/dev/sdb5             4        68    522081   fd  Linux raid autodetect
/dev/sdb6            69       323   2048256   fd  Linux raid autodetect
/dev/sdb7           324      2231  15325978+  fd  Linux raid autodetect

####################################################
root@argo-cd root # cat /proc/mdstat
Personalities : [raid1]
read_ahead 1024 sectors
md0 : active raid1 scsi/host0/bus0/target0/lun0/part6[0] scsi/host0/bus0/target1/lun0/part6[1]

      2048192 blocks [2/2] [UU]

md4 : active raid1 scsi/host0/bus0/target0/lun0/part1[0] scsi/host0/bus0/target1/lun0/part1[1]

      24000 blocks [2/2] [UU]

unused devices: <none>
####################################################
root@argo-cd root # mdadm -D /dev/md/0
/dev/md/0:

        Version : 00.90.00
  Creation Time : Tue Jun  1 19:02:24 2004
     Raid Level : raid1
     Array Size : 2048192 (2000.19 MiB 2097.35 MB)
    Device Size : 2048192 (2000.19 MiB 2097.35 MB)

Raid Devices : 2
Total Devices : 2
Preferred Minor : 2
Persistence : Superblock is persistent

Update Time : Tue Jun 1 23:00:22 2004
State : dirty, no-errors
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0

Number Major Minor RaidDevice State
0 8 6 0 active sync /dev/scsi/host0/bus0/target0/lun0/part6
1 8 22 1 active sync /dev/scsi/host0/bus0/target1/lun0/part6
UUID : 6f224ca0:92ecf8b5:bdf5d2b8:371b5bae
Events : 0.2

####################################################
root@argo-cd root # mount /dev/md0 /tmp/6 root@argo-cd root # mount /dev/md4 /tmp/6/boot/ root@argo-cd root # df
Filesystem 1k-blocks Used Available Use% Mounted on

rootfs                  425408    425408         0 100% /
/dev/cdroms/cdrom0      425408    425408         0 100% /
tmpfs                     6144      4160      1984  68% /etc
tmpfs                     6144      1600      4544  27% /var
tmpfs                     2048        12      2036   1% /var/tmp

/dev/md0 2048124 439932 1608192 22% /var/tmp/6
/dev/md4 23239 18278 3761 83% /var/tmp/6/boot
####################################################

Thanks again
sandro
*:-)

PS: I notice that preferred minor does not correspond w/ (my interpretation
of) real used minor. But I guess 'preferred' is not "compulsory"...

#3 lore raw
In reply to M K

I moved the array w/ on a different machine w/ a different controller (same model:adaptec 2940 pro ultra scsi) but the behaviour is the same: the array is not autodetected. The same kernel autodetects ide disks.

Please tell me: is there some setting, peculiar to SCSI autodetect, I'm ignoring?

sandro

Quoted 27 lines · M K
Quoted 3 lines

Can you send the exact command used to create the array, the raidtabs or mdadm.conf file and the fdisk -l listing of each drive thats part of the raid?

I used mdadm w/ (approxymantely, it's a script "mdadm --create $Md -l1 -n2 $part $part2")

mdadm --create /dev/md/0 -l1 -n2 /dev/scsi/host0/bus0/target0/lun0/part6 /dev/scsi/host0/bus0/target1/lun0/part6

Quoted 1 line

From a live CD after modprobe aic7xxx and "mdadm -A /dev/md4 /dev/sda1

/dev/sdb1" and "mdadm -A /dev/md0 /dev/sda6 /dev/sdb6"

####################################################
fdisk -l /dev/sda
root@argo-cd root # fdisk -l /dev/sda

Disk /dev/sda: 255 heads, 63 sectors, 2231 cylinders Units = cylinders of 16065 * 512 bytes

   Device Boot    Start       End    Blocks   Id  System
/dev/sda1             1         3     24066   fd  Linux raid autodetect
/dev/sda2             4      2231  17896410    f  Win95 Ext'd (LBA)
/dev/sda5             4        68    522081   fd  Linux raid autodetect
/dev/sda6            69       323   2048256   fd  Linux raid autodetect
/dev/sda7           324      2231  15325978+  fd  Linux raid autodetect
#4 lore raw
Quoted 6 lines · Sandro Dentella

I moved the array w/ on a different machine w/ a different controller (same model:adaptec 2940 pro ultra scsi) but the behaviour is the same: the array is not autodetected. The same kernel autodetects ide disks.

Please tell me: is there some setting, peculiar to SCSI autodetect, I'm ignoring?

it should not
for autodetect to work you would have to load the low-lever controller driver and the sd driver before autodetect

can you show some evidence (eg. dmesg)

L.

Signature · 6 lines
Luca Berra -- [email protected]
       Communication Media & Services S.r.l.
/"\
\ /     ASCII RIBBON CAMPAIGN
 X        AGAINST HTML MAIL
/ \