Skip to contentSkip to conversation

kernel_thread() audit drivers/scsi/aacraid/rkt.c

patch-kj maximilian attems 1 participant 1 message Jun 21, 2004

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Cleaned up code for error handing. Added checks to unmap memory, release IRQ's, and freeing up dev->queue.

---

 linux-2.6.7-max/drivers/scsi/aacraid/rkt.c |   25 ++++++++++++++++++-------
 1 files changed, 18 insertions(+), 7 deletions(-)
drivers/scsi/aacraid/rkt.c renamed from drivers/scsi/aacraid/rkt.c~kernel_thread-aacraid-rkt +18 -7
diff -puN drivers/scsi/aacraid/rkt.c~kernel_thread-aacraid-rkt drivers/scsi/aacraid/rkt.c
@@ -383,21 +383,21 @@ int aac_rkt_init(struct aac_dev *dev, un
 	if((dev->regs.rkt = (struct rkt_registers *)ioremap((unsigned long)dev->scsi_host_ptr->base, 8192))==NULL)
 	{	
 		printk(KERN_WARNING "aacraid: unable to map i960.\n" );
-		return -1;
+		goto error_iounmap;
 	}
 	/*
 	 *	Check to see if the board failed any self tests.
 	 */
 	if (rkt_readl(dev, IndexRegs.Mailbox[7]) & SELF_TEST_FAILED) {
 		printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance);
-		return -1;
+		goto error_iounmap;
 	}
 	/*
 	 *	Check to see if the board panic'd while booting.
 	 */
 	if (rkt_readl(dev, IndexRegs.Mailbox[7]) & KERNEL_PANIC) {
 		printk(KERN_ERR "%s%d: adapter kernel panic'd.\n", dev->name, instance);
-		return -1;
+		goto error_iounmap;
 	}
 	start = jiffies;
 	/*
@@ -409,7 +409,7 @@ int aac_rkt_init(struct aac_dev *dev, un
 		{
 			status = rkt_readl(dev, IndexRegs.Mailbox[7]) >> 16;
 			printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %ld.\n", dev->name, instance, status);
-			return -1;
+			goto error_iounmap;
 		}
 		set_current_state(TASK_UNINTERRUPTIBLE);
 		schedule_timeout(1);
@@ -417,7 +417,7 @@ int aac_rkt_init(struct aac_dev *dev, un
 	if (request_irq(dev->scsi_host_ptr->irq, aac_rkt_intr, SA_SHIRQ|SA_INTERRUPT, "aacraid", (void *)dev)<0) 
 	{
 		printk(KERN_ERR "%s%d: Interrupt unavailable.\n", name, instance);
-		return -1;
+		goto error_iounmap;
 	}
 	/*
 	 *	Fill in the function dispatch table.
@@ -430,7 +430,7 @@ int aac_rkt_init(struct aac_dev *dev, un
 	dev->a_ops.adapter_check_health = aac_rkt_check_health;
 
 	if (aac_init_adapter(dev) == NULL)
-		return -1;
+		goto error_irq;
 	/*
 	 *	Start any kernel threads needed
 	 */
@@ -438,7 +438,7 @@ int aac_rkt_init(struct aac_dev *dev, un
 	if(dev->thread_pid < 0)
 	{
 		printk(KERN_ERR "aacraid: Unable to create rkt thread.\n");
-		return -1;
+		goto error_kfree;
 	}	
 	/*
 	 *	Tell the adapter that all is configured, and it can start
@@ -446,4 +446,15 @@ int aac_rkt_init(struct aac_dev *dev, un
 	 */
 	aac_rkt_start_adapter(dev);
 	return 0;
+
+error_kfree:
+	kfree(dev->queues);
+
+error_irq:
+	free_irq(dev->scsi_host_ptr->irq, (void *)dev);
+
+error_iounmap:
+	iounmap(dev->regs.rkt);
+
+	return -1;
 }

_