Skip to contentSkip to conversation

HTB: Packet header size option.

LARTC Mike Mestnik 1 participant 1 message Jun 22, 2004

lore
Share & tools
lore
#0 lore raw

--- On Wed, 05 May 2004 14:01:28 +0100 "Andy Furniss" Wrote:

Quoted 9 lines

I forgot to say - if you use DSL tweaking uprate right upto the limit with bulk traffic may not be a good idea. There are atm overheads and thay are greater (as %) for small packets eg. htb counts empy ack as 40 bytes but it's 106 on wire. If people start gaming (30 small pps up each) things may fall apart.

AFAIK there is no MPU for HTB like there is for CBQ.

Andy.

That is a missing feature, but don't you mean pktweight. As in the weight of each pkt header? I think the best a user can do is set rate at %80 of configured rate. I don't know what burst should be set too, but I would think that, after the 100hz CPU thing, you would be targeting the modems buffer size?

__________________________________
Do you Yahoo!?
Yahoo! Mail is new and improved - Check it out!
http://promotions.yahoo.com/new_mail
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/