PATCH [5/18] qla2xxx: Add module parameter permissions
Subsystems (2)
ChangeSet
1.1841 04/06/03 16:29:07 [email protected] +1 -0 Add permissions to the driver's module_params.
Signed-off-by Andrew Vasquez <[email protected]>
drivers/scsi/qla2xxx/qla_os.c | 24 ++++++++++++------------ 1 files changed, 12 insertions(+), 12 deletions(-)
drivers/scsi/qla2xxx/qla_os.c +12 -12
@@ -46,72 +46,72 @@* Module parameter information and variables */ int ql2xmaxqdepth; -module_param (ql2xmaxqdepth, int,0 ); +module_param (ql2xmaxqdepth, int,S_IRUGO |S_IWUSR );MODULE_PARM_DESC (ql2xmaxqdepth,"Maximum queue depth to report for target devices." );int ql2xlogintimeout =20 ; -module_param (ql2xlogintimeout, int,0 ); +module_param (ql2xlogintimeout, int,S_IRUGO |S_IRUSR );MODULE_PARM_DESC (ql2xlogintimeout,"Login timeout value in seconds." );int qlport_down_retry; -module_param (qlport_down_retry, int,0 ); +module_param (qlport_down_retry, int,S_IRUGO |S_IRUSR );MODULE_PARM_DESC (qlport_down_retry,"Maximum number of command retries to a port that returns" "a PORT-DOWN status." );int ql2xretrycount =20 ; -module_param (ql2xretrycount, int,0 ); +module_param (ql2xretrycount, int,S_IRUGO |S_IWUSR );MODULE_PARM_DESC (ql2xretrycount,"Maximum number of mid-layer retries allowed for a command. " "Default value is 20, " );int displayConfig; -module_param (displayConfig, int,0 ); +module_param (displayConfig, int,S_IRUGO |S_IWUSR );MODULE_PARM_DESC (displayConfig,"If 1 then display the configuration used in /etc/modprobe.conf." );int ql2xplogiabsentdevice; -module_param (ql2xplogiabsentdevice, int,0 ); +module_param (ql2xplogiabsentdevice, int,S_IRUGO |S_IWUSR );MODULE_PARM_DESC (ql2xplogiabsentdevice,"Option to enable PLOGI to devices that are not present after " "a Fabric scan. This is needed for several broken switches." "Default is 0 - no PLOGI. 1 - perfom PLOGI." );int ql2xintrdelaytimer =10 ; -module_param (ql2xintrdelaytimer, int,0 ); +module_param (ql2xintrdelaytimer, int,S_IRUGO |S_IRUSR );MODULE_PARM_DESC (ql2xintrdelaytimer,"ZIO: Waiting time for Firmware before it generates an " "interrupt to the host to notify completion of request." );int ConfigRequired; -module_param (ConfigRequired, int,0 ); +module_param (ConfigRequired, int,S_IRUGO |S_IRUSR );MODULE_PARM_DESC (ConfigRequired,"If 1, then only configured devices passed in through the" "ql2xopts parameter will be presented to the OS" );int Bind =BIND_BY_PORT_NAME ; -module_param (Bind, int,0 ); +module_param (Bind, int,S_IRUGO |S_IRUSR );MODULE_PARM_DESC (Bind,"Target persistent binding method: " "0 by Portname (default); 1 by PortID; 2 by Nodename. " );int ql2xsuspendcount =SUSPEND_COUNT ; -module_param (ql2xsuspendcount, int,0 ); +module_param (ql2xsuspendcount, int,S_IRUGO |S_IWUSR );MODULE_PARM_DESC (ql2xsuspendcount,"Number of 6-second suspend iterations to perform while a " "target returns a <NOT READY> status. Default is 10 " "iterations." );int ql2xdoinitscan =1 ; -module_param (ql2xdoinitscan, int,0 ); +module_param (ql2xdoinitscan, int,S_IRUGO |S_IWUSR );MODULE_PARM_DESC (ql2xdoinitscan,"Signal mid-layer to perform scan after driver load: 0 -- no " "signal sent to mid-layer." );int ql2xloginretrycount =0 ; -module_param (ql2xloginretrycount, int,0 ); +module_param (ql2xloginretrycount, int,S_IRUGO |S_IRUSR );MODULE_PARM_DESC (ql2xloginretrycount,"Specify an alternate value for the NVRAM login retry count." );