more questions.
I forgot to ask a few more.
Is there a relation between the hashtable ID /(parent,handle) so that if I used 2:
for a hash table I could or couldn't use 2: for a (parent,handle)ID?
I also noticed that you type the hashtables like 2:2: can you have more levels with this? like 2:2:2:1: ? and I guess the same question with the parent/handles.
thanks again.
--
When dealing with a slow pipe, never underestimate the throughput of the postal system.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 2 lines
Is there a relation between the hashtable ID /(parent,handle) so that if I used 2:
for a hash table I could or couldn't use 2: for a (parent,handle)ID?
No relation. You can use the same id for both.
Quoted 2 lines
I also noticed that you type the hashtables like 2:2: can you have more levels with this? like 2:2:2:1: ? and I guess the same question with the parent/handles.
No, you cannot do this.
For hashes check my previous mail, for handler: xxxxyyyy, where xxxx is qdisc id and yyyy is class id.
Quoted 11 lines
thanks again.
--
When dealing with a slow pipe, never underestimate the throughput of the postal system._______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
---
Catalin(ux aka Dino) BOIE
catab at deuroconsult.ro
http://kernel.umbrella.ro/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
tc filter add dev eth0 parent 1:0 prio 10 handle 3: protocol ip u32 divisor 256
tc filter add dev eth0 protocol ip parent 1:0 prio 10 u32 ht 800:: match ip dst 10.2.0.0/16 hashkey mask 0x0000ff00 at 16 link 3:
tc filter add dev eth1 parent 1:0 prio 10 handle 3: protocol ip u32 divisor 256
tc filter add dev eth1 protocol ip parent 1:0 prio 10 u32 ht 800:: match ip src 10.2.0.0/16 hashkey mask 0x0000ff00 at 12 link 3:
So I have something like this. the first command is saying handle 3 does this mean it is createing a hash table because of an divisor? and the link command on the second command would only referecne to a HT?
Quoted 16 lines · Catalin BOIE
Quoted 3 lines
Is there a relation between the hashtable ID /(parent,handle) so that if I used 2:
for a hash table I could or couldn't use 2: for a (parent,handle)ID?No relation. You can use the same id for both.
Quoted 2 lines
I also noticed that you type the hashtables like 2:2: can you have more levels with this? like 2:2:2:1: ? and I guess the same question with the parent/handles.
No, you cannot do this.
For hashes check my previous mail, for handler: xxxxyyyy, where xxxx is qdisc id and yyyy is class id.Quoted 5 lines
thanks again.
--
When dealing with a slow pipe, never underestimate the throughput of the postal
system.
Quoted 7 lines
Quoted 6 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 5 lines
---
Catalin(ux aka Dino) BOIE
catab at deuroconsult.ro
http://kernel.umbrella.ro/
--
When dealing with a slow pipe, never underestimate the throughput of the postal system.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
one more I missed is from the documentation.
# tc filter add dev eth1 protocol ip parent 1:0 prio 5 u32 ht 800:: \
match ip src 1.2.0.0/16 \
hashkey mask 0x000000ff at 12 \
link 2:Ok, some numbers need explaining. The default hash table is called 800:: and all filtering starts there.
I don't understand the default hast table does that mean 800 is unusable? Can you use a different had table for the root here? or do I have to start all hashtables with 800:: for their roots?
Quoted 16 lines · Catalin BOIE
Quoted 3 lines
Is there a relation between the hashtable ID /(parent,handle) so that if I used 2:
for a hash table I could or couldn't use 2: for a (parent,handle)ID?No relation. You can use the same id for both.
Quoted 2 lines
I also noticed that you type the hashtables like 2:2: can you have more levels with this? like 2:2:2:1: ? and I guess the same question with the parent/handles.
No, you cannot do this.
For hashes check my previous mail, for handler: xxxxyyyy, where xxxx is qdisc id and yyyy is class id.Quoted 5 lines
thanks again.
--
When dealing with a slow pipe, never underestimate the throughput of the postal
system.
Quoted 7 lines
Quoted 6 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 5 lines
---
Catalin(ux aka Dino) BOIE
catab at deuroconsult.ro
http://kernel.umbrella.ro/
--
When dealing with a slow pipe, never underestimate the throughput of the postal system.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 8 lines
tc filter add dev eth1 parent 1:0 prio 10 handle 3: protocol ip u32 divisor 256
tc filter add dev eth1 protocol ip parent 1:0 prio 10 u32 ht 800:: match ip src 10.2.0.0/16 hashkey mask
0x0000ff00at 12 link 3:So I have something like this. the first command is saying handle 3 does this mean it is createing a hash table because of an divisor? and the link command on the second command would only referecne to a HT?
Yes. An you must fill hashes 3:xx with other filters or just flowid. Something like this:
tc filter add dev eth1 parent 1:0 protocol ip u32 ht 3:04: order 1 \
match ip dst 1.2.3.4/24 flowid 1:4
or
tc filter add dev eth1 parent 1:0 protocol ip u32 ht 3:04: order 1 \
flowid 1:4
Quoted 27 lines
Quoted 16 lines · Catalin BOIE
Quoted 3 lines
Is there a relation between the hashtable ID /(parent,handle) so that if I used 2:
for a hash table I could or couldn't use 2: for a (parent,handle)ID?No relation. You can use the same id for both.
Quoted 2 lines
I also noticed that you type the hashtables like 2:2: can you have more levels with this? like 2:2:2:1: ? and I guess the same question with the parent/handles.
No, you cannot do this.
For hashes check my previous mail, for handler: xxxxyyyy, where xxxx is qdisc id and yyyy is class id.Quoted 5 lines
thanks again.
--
When dealing with a slow pipe, never underestimate the throughput of the postalsystem.
Quoted 7 lines
Quoted 6 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 10 lines
Quoted 5 lines
---
Catalin(ux aka Dino) BOIE
catab at deuroconsult.ro
http://kernel.umbrella.ro/--
When dealing with a slow pipe, never underestimate the throughput of the postal system.
---
Catalin(ux aka Dino) BOIE
catab at deuroconsult.ro
http://kernel.umbrella.ro/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/