Hash table
Sorry for all the questions I'm just trying to understand how it all works. Thank you for your time.
Is the following configuration possible? where ht 800 links to 3: for the 3rd Octet in the IP and then 3: links to 4: for the fourth Octet?
tc filter add dev eth0 parent 1:0 prio 10 handle 3: protocol ip u32 divisor 256
tc filter add dev eth0 protocol ip parent 1:0 prio 10 u32 ht 800:: match ip dst 10.1.0.0/16 hashkey mask 0x0000ff00 at 16 link 3:
tc filter add dev eth0 parent 1:0 prio 10 handle 4: protocol ip u32 divisor 256
tc filter add dev eth0 protocol ip parent 1:0 prio 10 u32 ht 3:01: match ip dst 10.1.1.0/24 hashkey mask 0x000000ff at 16 link 4:
I'm not sure how the Hashtable works I looked at the code that you had pointed out to me and I think my thinking is wrong on this.
[root@RL1 root]# tc -s filter ls dev eth0
filter parent 1: protocol ip pref 10 u32
filter parent 1: protocol ip pref 10 u32 fh 4: ht divisor 256 filter parent 1: protocol ip pref 10 u32 fh 4:ba:800 order 2048 key ht 4 bkt ba flowid 1:65
match 0a0101ba/ffffffff at 16
I would guess that my problem start here where it is not linking back to 3? maybe?
filter parent 1: protocol ip pref 10 u32 fh 4:fc:800 order 2048 key ht 4 bkt fc flowid 1:65
match 0a0101fc/ffffffff at 16
filter parent 1: protocol ip pref 10 u32 fh 3: ht divisor 256
filter parent 1: protocol ip pref 10 u32 fh 3:1:800 order 2048 key ht 3 bkt 1 link 4:
match 0a010100/ffffff00 at 16
hash mask 000000ff at 16
filter parent 1: protocol ip pref 10 u32 fh 800: ht divisor 1 filter parent 1: protocol ip pref 10 u32 fh 800::800 order 2048 key ht 800 bkt 0 link 3:
match 0a010000/ffff0000 at 16
hash mask 0000ff00 at 16
--
When dealing with a slow pipe, never underestimate the throughput of the postal system.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/