e: [T] filter ingress policy rates -> slow!!
Quoted 4 lines · Stef Coene
Can you post the tc counters?
tc -s -d qdisc filter ffff:Stef
Sure:
BTW, that command d9oesn't work fine here:
[root@k12ltsp-server root]# tc -s -d qdisc filter ffff:
Command "filter" is unknown, try "tc qdisc help". So let's just print:
[root@k12ltsp-server root]# /etc/init.d/eshaper start downlink
Applying tc rules: [ OK ]
(That command starts *only* ingress policies)
[root@k12ltsp-server root]# tc -s -d qdisc
qdisc ingress ffff: dev eth0 ----------------
Sent 384 bytes 3 pkts (dropped 0, overlimits 0)
[root@k12ltsp-server root]#
Is this normal or expected?
Thanks for your time,
Edulix.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 5 lines · Edulix
(That command starts *only* ingress policies)
[root@k12ltsp-server root]# tc -s -d qdisc
qdisc ingress ffff: dev eth0 ----------------
Sent 384 bytes 3 pkts (dropped 0, overlimits 0)
[root@k12ltsp-server root]#
This is a joke? You have not demonstrated any slowdown.
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/