How to open a device using ALSA API
Hi all
I am quite new using the ALSA sound API and have been trying to open the sound card with the following function:
#define AUDIO_DEVICE "/dev/dsp"
if ((err = snd_pcm_open (&capture_handle,AUDIO_DEVICE, SND_PCM_STREAM_CAPTURE, 0)) < 0) {
fprintf (stderr, "cannot open audio device %s
(%s)\n",
argv[1], snd_strerror (err)); exit (1); }
But I´ve got the following problem when running it:
$ ./captureAlsa ALSA lib pcm.c:1972:(snd_pcm_open_noupdate) Unknown PCM /dev/dsp cannot open audio device (null) (No such file or directory)
I think I am not configuring correctly the audio device
card.
Does anyone know how to configure properly the parameters to open correctly the sound card? I´ve seen something about it in ecasound-2.3.3 aplication that uses the ALSA driver but all I have found was:
err = snd_pcm_open(&audio_fd_repp,
(char*)device_name.c_str(), pcm_stream_rep, SND_PCM_NONBLOCK);
I tried to figure out what is the device_name.c_str() but I can´t find this function in the ecasound cpp files.
Does anyone have a simple example that shows how to open the sound card with ALSA?
Thanks in advance and best regards
Guild
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com
Quoted 6 lines · Guild Jackson
Hi all
I am quite new using the ALSA sound API and have been trying to open the sound card with the following function:
#defineAUDIO_DEVICE"/dev/dsp"
Use:
#define AUDIO_DEVICE "default"
Jaroslav
-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project, SUSE Labs
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com
Quoted 1 line
#define
AUDIO_DEVICE"/dev/dsp"
/dev/dsp and friends belong to the old OSS device drivers. try to forget about them.
Quoted 6 lines
err = snd_pcm_open(&audio_fd_repp,
(char*)device_name.c_str(), pcm_stream_rep, SND_PCM_NONBLOCK);I tried to figure out what is the
device_name.c_str()
its the name of an ALSA device defined in either a system-wide or per-user configuration file. typical system wide names:
hw:0 = the first audio interface, accessed with only
the hw-supported capabilities of the device
plughw:0 = the first audio interface, accessible with
more or less any parameters you request
hw:1 = the second audio interface
there are many others. see asound.conf (use locate(1) to find it on your system) and/or ~/.asoundrc.
btw: your program should *never* code the device name to be used. it should always be left to the user to specify, and use "default" if they do not specify anything.
--p
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com