Skip to contentSkip to conversation

disabling irq, nobody cared

DISCUSSION Adrian Sandor 2 participants 5 messages Jul 18, 2004

lore
Share & tools
lore
#0 lore raw

Hello all,

Apologizes if this is a duplicate, many people seem to have similar error messages but it may or may not be the same problem.
For the past couple of weeks I've been trying hard to install a distribution of linux on this computer, and failed every time.
Suse, Fedora, Knoppix hdd installation, Gentoo... all failed with every kernel I tried.
The ones that didn't hang or reboot immediately displayed error messages like:

irq 18: nobody cared!

Call Trace:
[<c01096d2>] __report_bad_irq+0x2a/0x8b
[<c01097bc>] note_interrupt+0x6f/0x9f
[<c0109ada>] do_IRQ+0x161/0x192
[<c0107dec>] common_interrupt+0x18/0x20
[<c0125a0b>] do_softirq+0x57/0xc2
[<c0109ab7>] do_IRQ+0x13e/0x192
[<c0107dec>] common_interrupt+0x18/0x20
[<c010501e>] default_idle+0x0/0x2c
[<c0105047>] default_idle+0x29/0x2c
[<c01050b0>] cpu_idle+0x33/0x3c
[<c0121a36>] printk+0x17d/0x1e6

handlers:
[<c02a028e>] (ide_intr+0x0/0x1cb)
[<c02a028e>] (ide_intr+0x0/0x1cb)
[<c02e108a>] (usb_hcd_irq+0x0/0x67)
Disabling IRQ #18

and

hdb: dma_timer_expiry: dma status == 0x64
hdb: DMA interrupt recovery
hdb: lost interrupt

with various irq numbers and stack traces. That either slowed the system to a crawl or flooded the console with "disabling irq x" messages.

I have tried different kernel options: SMP and no SMP, disabling APIC, etc, different kernels: 2.4.25, 2.6.5, 2.6.8-rc1, even tried some patches, but nothing worked (2.4 usually hanged, and 2.6 gave the above error messages).
The only kernels that booted without problems were the Gentoo (2004.1) and Knoppix (3.4) live cd kernels. Knoppix (booted from cd) works generally well, but hangs from time to time (especially when I access the disks in mc).

I have an Asus P4P800 Deluxe mobo, and a P4 2.8GHz with HT activated.
I uploaded a var/log/messages file at
http://aditsu.freeunixhost.com/messages.zip for your reference (68KB zipped, 980KB unpacked). This is from gentoo only.
The computer works flawlessly in windows xp.

Please help me out, so that all these wasted days won't be in vain. I can provide any other necessary information if I can understand how to obtain it (I'm not a linux expert).

I'd appreciate if you could cc me in the replies.

Thanks
Adrian

__________________________________
Do you Yahoo!?
Vote for the stars of Yahoo!'s next ad campaign!
http://advision.webevents.yahoo.com/yahoo/votelifeengine/

#1 lore raw
Quoted 6 lines · Adrian Sandor

hdb: dma_timer_expiry: dma status == 0x64
hdb: DMA interrupt recovery
hdb: lost interrupt

I have an Asus P4P800 Deluxe mobo, and a P4 2.8GHz with HT activated.

Had the same problem last week. After some googling the solution was to change the settings of the SATA port in BIOS to Enhanced Mode, SATA only.

(http://seclists.org/lists/linux-kernel/2004/Jan/2324.html)

Jan

#2 lore raw
Quoted 9 lines · --- Jan Dittmer
Quoted 3 lines · Adrian Sandor

hdb: dma_timer_expiry: dma status == 0x64
hdb: DMA interrupt recovery
hdb: lost interrupt

Had the same problem last week. After some googling the solution was to
change the settings of the SATA port in BIOS to Enhanced Mode, SATA only.

Thanks, but I don't have any SATA disk; my BIOS IDE settings are: Enhanced Mode, P-ATA only. And my main problem seems to be the "disabling irq" thing.

Regards,
Adrian

__________________________________
Do you Yahoo!?
Vote for the stars of Yahoo!'s next ad campaign!
http://advision.webevents.yahoo.com/yahoo/votelifeengine/

#3 lore raw
Quoted 13 lines · Adrian Sandor
Quoted 9 lines · --- Jan Dittmer
Quoted 3 lines · Adrian Sandor

hdb: dma_timer_expiry: dma status == 0x64
hdb: DMA interrupt recovery
hdb: lost interrupt

Had the same problem last week. After some googling
the solution was to change the settings of the SATA port in BIOS to Enhanced Mode, SATA only.

Quoted 4 lines

Thanks, but I don't have any SATA disk; my BIOS IDE settings are: Enhanced Mode, P-ATA only. And my main problem seems to be the "disabling irq" thing.

I don't have any SATA disk either. Though it did make a difference! Have you actually tried to change it?

Jan

#4 lore raw
Quoted 3 lines · --- Jan Dittmer

I don't have any SATA disk either. Though it did
make a difference!
Have you actually tried to change it?

I tried it now, and it indeed made a huge difference! And the effect was not a big failure to detect the disks as I expected, but.. the first kernel I tried (2.6.8-rc1) booted without any noticeable error or problem! (and windows xp was not affected)

I'm completely baffled about this, and I'm left with two questions:
1. why?
2. does it have any negative side-effect (e.g. related to disk transfer performance)?

Thanks a lot!
Adrian

__________________________________
Do you Yahoo!?
Vote for the stars of Yahoo!'s next ad campaign!
http://advision.webevents.yahoo.com/yahoo/votelifeengine/