eicon/os_bri: replace

I would appreciate any comments from the janitors list.

Thanks,
Nish

Applys-to: 2.6.7

Description: Replace diva_os_sleep() with msleep() and diva_os_wait() with mdelay() in all instances.

Signed-off-by Nishanth Aravamudan <[email protected]>

drivers/isdn/hardware/eicon/os_4bri.c +4 -4

@@ -543,7 +543,7 @@ static int _4bri_get_serial_number(diva_
 		for (j = 0; j < 5; ++j) {
 			PCIwrite(Bus, Slot, 0x4E, &addr, sizeof(addr),
 				 hdev);
-			diva_os_wait(1);
+			mdelay(1);
 			PCIread(Bus, Slot, 0x4E, &status, sizeof(status),
 				hdev);
 			if (status & 0x8000)

@@ -950,7 +950,7 @@ diva_4bri_start_adapter(PISDN_ADAPTER Io
 	signature = (volatile word *) (&p[0x1E]);
 
 	for (i = 0; i < 300; ++i) {
-		diva_os_wait(10);
+		mdelay(10);
 		if (READ_WORD(&signature[0]) == 0x4447) {
 			DBG_TRC(("Protocol startup time %d.%02d seconds",
 				 (i / 100), (i % 100)))

@@ -1027,7 +1027,7 @@ static int check_qBri_interrupt(PISDN_AD
 	a->ReadyInt = 1;
 	a->ram_out(a, &PR_RAM->ReadyInt, 1);
 
-	for (i = 100; !IoAdapter->IrqCount && (i-- > 0); diva_os_wait(10));
+	for (i = 100; !IoAdapter->IrqCount && (i-- > 0); mdelay(10));
 
 	return ((IoAdapter->IrqCount > 0) ? 0 : -1);
 #else

@@ -1050,7 +1050,7 @@ static int check_qBri_interrupt(PISDN_AD
 	p[PLX9054_INTCSR] = PLX9054_INT_ENABLE;
 	DIVA_OS_MEM_DETACH_RESET(IoAdapter, p);
 
-	diva_os_wait(100);
+	mdelay(100);
 
 	return (0);
 #endif				/* SUPPORT_INTERRUPT_TEST_ON_4BRI */