eicon/os_bri: replace schedule_timeout()

@@ -543,7 +543,7 @@ static int _4bri_get_serial_number(diva_
 		for (j = 0; j < 5; ++j) {
 			PCIwrite(Bus, Slot, 0x4E, &addr, sizeof(addr),
 				 hdev);
-			diva_os_wait(1);
+			mdelay(1);
 			PCIread(Bus, Slot, 0x4E, &status, sizeof(status),
 				hdev);
 			if (status & 0x8000)

@@ -950,7 +950,7 @@ diva_4bri_start_adapter(PISDN_ADAPTER Io
 	signature = (volatile word *) (&p[0x1E]);
 
 	for (i = 0; i < 300; ++i) {
-		diva_os_wait(10);
+		mdelay(10);
 		if (READ_WORD(&signature[0]) == 0x4447) {
 			DBG_TRC(("Protocol startup time %d.%02d seconds",
 				 (i / 100), (i % 100)))

@@ -1027,7 +1027,7 @@ static int check_qBri_interrupt(PISDN_AD
 	a->ReadyInt = 1;
 	a->ram_out(a, &PR_RAM->ReadyInt, 1);
 
-	for (i = 100; !IoAdapter->IrqCount && (i-- > 0); diva_os_wait(10));
+	for (i = 100; !IoAdapter->IrqCount && (i-- > 0); mdelay(10));
 
 	return ((IoAdapter->IrqCount > 0) ? 0 : -1);
 #else

@@ -1050,7 +1050,7 @@ static int check_qBri_interrupt(PISDN_AD
 	p[PLX9054_INTCSR] = PLX9054_INT_ENABLE;
 	DIVA_OS_MEM_DETACH_RESET(IoAdapter, p);
 
-	diva_os_wait(100);
+	mdelay(100);
 
 	return (0);
 #endif				/* SUPPORT_INTERRUPT_TEST_ON_4BRI */

@@ -1111,7 +1111,7 @@ static int diva_4bri_stop_adapter(diva_o
 	IoAdapter->a.ReadyInt = 1;
 	IoAdapter->a.ram_inc(&IoAdapter->a, &PR_RAM->ReadyInt);
 	do {
-		diva_os_sleep(10);
+		msleep(10);
 	} while (i-- && a->clear_interrupts_proc);
 
 	if (a->clear_interrupts_proc) {

@@ -525,7 +525,7 @@ static int diva_bri_reset_adapter(PISDN_
 			 IoAdapter->ANum)) return (-1);
 	}
 	(*(IoAdapter->rstFnc)) (IoAdapter);
-	diva_os_wait(100);
+	mdelay(100);
 	Port = DIVA_OS_MEM_ATTACH_PORT(IoAdapter);
 	addrHi = Port +
 	    ((IoAdapter->Properties.Bus == BUS_PCI) ? M_PCI_ADDRH : ADDRH);

@@ -546,7 +546,7 @@ static int diva_bri_reset_adapter(PISDN_
 		       BRI_SHARED_RAM_SIZE) >> 16));
 	outppw(addrLo, 0);
 	for (i = 0; i < 0x8000; outppw(ioaddr, 0), ++i);
-	diva_os_wait(100);
+	mdelay(100);
 
 	/*
 	   clear signature

@@ -679,7 +679,7 @@ diva_bri_start_adapter(PISDN_ADAPTER IoA
 	   wait for signature (max. 3 seconds)
 	 */
 	for (i = 0; i < 300; ++i) {
-		diva_os_wait(10);
+		mdelay(10);
 		outpp(addrHi,
 		      (byte) (
 			      (IoAdapter->MemoryBase +

@@ -721,7 +721,7 @@ diva_bri_start_adapter(PISDN_ADAPTER IoA
 
 	a->ram_out(a, &PR_RAM->ReadyInt, 1);
 	for (i = 0; ((!IoAdapter->IrqCount) && (i < 100)); i++) {
-		diva_os_wait(10);
+		mdelay(10);
 	}
 	if (!IoAdapter->IrqCount) {
 		DBG_ERR(

@@ -793,7 +793,7 @@ static int diva_bri_stop_adapter(diva_os
 	IoAdapter->a.ReadyInt = 1;
 	IoAdapter->a.ram_inc(&IoAdapter->a, &PR_RAM->ReadyInt);
 	do {
-		diva_os_sleep(10);
+		msleep(10);
 	} while (i-- && a->clear_interrupts_proc);
 	if (a->clear_interrupts_proc) {
 		diva_bri_clear_interrupts(a);