macintosh/mediabay: replace

@@ -686,15 +685,13 @@ static int __devinit media_bay_attach(st
 
 	/* Force an immediate detect */
 	set_mb_power(bay, 0);
-	set_current_state(TASK_UNINTERRUPTIBLE);
-	schedule_timeout(MS_TO_HZ(MB_POWER_DELAY));
+	msleep(MB_POWER_DELAY);
 	bay->content_id = MB_NO;
 	bay->last_value = bay->ops->content(bay);
 	bay->value_count = MS_TO_HZ(MB_STABLE_DELAY);
 	bay->state = mb_empty;
 	do {
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout(MS_TO_HZ(MB_POLL_DELAY));
+		msleep(MB_POLL_DELAY);
 		media_bay_step(i);
 	} while((bay->state != mb_empty) &&
 		(bay->state != mb_up));

@@ -719,8 +716,7 @@ static int __pmac media_bay_suspend(stru
 		bay->sleeping = 1;
 		set_mb_power(bay, 0);
 		up(&bay->lock);
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout(MS_TO_HZ(MB_POLL_DELAY));
+		msleep(MB_POLL_DELAY);
 		mdev->ofdev.dev.power_state = state;
 	}
 	return 0;

@@ -740,8 +736,7 @@ static int __pmac media_bay_resume(struc
 	       	/* Force MB power to 0 */
 		down(&bay->lock);
 	       	set_mb_power(bay, 0);
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout(MS_TO_HZ(MB_POWER_DELAY));
+		msleep(MB_POWER_DELAY);
 	       	if (bay->ops->content(bay) != bay->content_id) {
 			printk("mediabay%d: content changed during sleep...\n", bay->index);
 			up(&bay->lock);

@@ -755,8 +750,7 @@ static int __pmac media_bay_resume(struc
 	       	bay->cd_retry = 0;
 #endif
 	       	do {
-			set_current_state(TASK_UNINTERRUPTIBLE);
-			schedule_timeout(MS_TO_HZ(MB_POLL_DELAY));
+			msleep(MB_POLL_DELAY);
 	       		media_bay_step(bay->index);
 	       	} while((bay->state != mb_empty) &&
 	       		(bay->state != mb_up));

@@ -17,6 +17,7 @@
 #include <linux/delay.h>
 #include <linux/sched.h>
 #include <linux/timer.h>
+#include <linux/time.h>
 #include <linux/hdreg.h>
 #include <linux/stddef.h>
 #include <linux/init.h>

@@ -98,11 +99,6 @@ int media_bay_count = 0;
 #define MB_IDE_READY(i)	((readb(media_bays[i].cd_base + 0x70) & 0x80) == 0)
 #endif
 
-/* Note: All delays are not in milliseconds and converted to HZ relative
- * values by the macro below
- */
-#define MS_TO_HZ(ms)	((ms * HZ + 999) / 1000)
-
 /*
  * Wait that number of ms between each step in normal polling mode
  */

@@ -120,26 +116,26 @@ int media_bay_count = 0;
 #define MB_POWER_DELAY	200
 
 /*
- * Hold the media-bay reset signal true for this many ticks
+ * Hold the media-bay reset signal true for this many ms
  * after a device is inserted before releasing it.
  */
 #define MB_RESET_DELAY	50
 
 /*
- * Wait this long after the reset signal is released and before doing
+ * Wait this many ms after the reset signal is released and before doing
  * further operations. After this delay, the IDE reset signal is released
  * too for an IDE device
  */
 #define MB_SETUP_DELAY	100
 
 /*
- * Wait this many ticks after an IDE device (e.g. CD-ROM) is inserted
+ * Wait this many ms after an IDE device (e.g. CD-ROM) is inserted
  * (or until the device is ready) before waiting for busy bit to disappear
  */
 #define MB_IDE_WAIT	1000
 
 /*
- * Timeout waiting for busy bit of an IDE device to go down
+ * Timeout waiting for busy bit of an IDE device to go down, in ms
  */
 #define MB_IDE_TIMEOUT	5000
 

@@ -384,7 +380,7 @@ static inline void __pmac set_mb_power(s
 		bay->state = mb_powering_down;
 		MBDBG("mediabay%d: powering down\n", bay->index);
 	}
-	bay->timer = MS_TO_HZ(MB_POWER_DELAY);
+	bay->timer = msecs_to_jiffies(MB_POWER_DELAY);
 }
 
 static void __pmac poll_media_bay(struct media_bay_info* bay)

@@ -393,8 +389,8 @@ static void __pmac poll_media_bay(struct
 
 	if (id == bay->last_value) {
 		if (id != bay->content_id) {
-			bay->value_count += MS_TO_HZ(MB_POLL_DELAY);
-			if (bay->value_count >= MS_TO_HZ(MB_STABLE_DELAY)) {
+			bay->value_count += msecs_to_jiffies(MB_POLL_DELAY);
+			if (bay->value_count >= msecs_to_jiffies(MB_STABLE_DELAY)) {
 				/* If the device type changes without going thru
 				 * "MB_NO", we force a pass by "MB_NO" to make sure
 				 * things are properly reset

@@ -503,7 +499,7 @@ static void __pmac media_bay_step(int i)
 
 	/* If timer expired or polling IDE busy, run state machine */
 	if ((bay->state != mb_ide_waiting) && (bay->timer != 0)) {
-		bay->timer -= MS_TO_HZ(MB_POLL_DELAY);
+		bay->timer -= msecs_to_jiffies(MB_POLL_DELAY);
 		if (bay->timer > 0)
 			return;
 		bay->timer = 0;

@@ -516,13 +512,13 @@ static void __pmac media_bay_step(int i)
 	    		set_mb_power(bay, 0);
 	    		break;
 	    	}
-	    	bay->timer = MS_TO_HZ(MB_RESET_DELAY);
+	    	bay->timer = msecs_to_jiffies(MB_RESET_DELAY);
 	    	bay->state = mb_enabling_bay;
 		MBDBG("mediabay%d: enabling (kind:%d)\n", i, bay->content_id);
 		break;
 	case mb_enabling_bay:
 		bay->ops->un_reset(bay);
-	    	bay->timer = MS_TO_HZ(MB_SETUP_DELAY);
+	    	bay->timer = msecs_to_jiffies(MB_SETUP_DELAY);
 	    	bay->state = mb_resetting;
 		MBDBG("mediabay%d: waiting reset (kind:%d)\n", i, bay->content_id);
 	    	break;

@@ -536,7 +532,7 @@ static void __pmac media_bay_step(int i)
 #ifdef CONFIG_BLK_DEV_IDE
 		MBDBG("mediabay%d: waiting IDE reset (kind:%d)\n", i, bay->content_id);
 		bay->ops->un_reset_ide(bay);
-	    	bay->timer = MS_TO_HZ(MB_IDE_WAIT);
+	    	bay->timer = msecs_to_jiffies(MB_IDE_WAIT);
 	    	bay->state = mb_ide_resetting;
 #else
 		printk(KERN_DEBUG "media-bay %d is ide (not compiled in kernel)\n", i);

@@ -546,7 +542,7 @@ static void __pmac media_bay_step(int i)
 	    
 #ifdef CONFIG_BLK_DEV_IDE
 	case mb_ide_resetting:
-	    	bay->timer = MS_TO_HZ(MB_IDE_TIMEOUT);
+	    	bay->timer = msecs_to_jiffies(MB_IDE_TIMEOUT);
 	    	bay->state = mb_ide_waiting;
 		MBDBG("mediabay%d: waiting IDE ready (kind:%d)\n", i, bay->content_id);
 	    	break;

@@ -582,7 +578,7 @@ static void __pmac media_bay_step(int i)
 			}
 			break;
 	    	} else if (bay->timer > 0)
-			bay->timer -= MS_TO_HZ(MB_POLL_DELAY);
+			bay->timer -= msecs_to_jiffies(MB_POLL_DELAY);
 	    	if (bay->timer <= 0) {
 			printk("\nIDE Timeout in bay %d !, IDE state is: 0x%02x\n",
 			       i, readb(bay->cd_base + 0x70));

@@ -688,7 +684,7 @@ static int __devinit media_bay_attach(st
 	msleep(MB_POWER_DELAY);
 	bay->content_id = MB_NO;
 	bay->last_value = bay->ops->content(bay);
-	bay->value_count = MS_TO_HZ(MB_STABLE_DELAY);
+	bay->value_count = msecs_to_jiffies(MB_STABLE_DELAY);
 	bay->state = mb_empty;
 	do {
 		msleep(MB_POLL_DELAY);

@@ -744,8 +740,8 @@ static int __pmac media_bay_resume(struc
 		}
 	       	set_mb_power(bay, 1);
 	       	bay->last_value = bay->content_id;
-	       	bay->value_count = MS_TO_HZ(MB_STABLE_DELAY);
-	       	bay->timer = MS_TO_HZ(MB_POWER_DELAY);
+	       	bay->value_count = msecs_to_jiffies(MB_STABLE_DELAY);
+	       	bay->timer = msecs_to_jiffies(MB_POWER_DELAY);
 #ifdef CONFIG_BLK_DEV_IDE
 	       	bay->cd_retry = 0;
 #endif