LVM2 and RAID 1 not working on Fedora Core 2
Hello, I'm running Fedora Core 2 on a Dell Poweredge 1750 with three 36G SCSI drives setup with two volumes, /boot and /, setup with software RAID 1 with online spare. This was setup at install, which reported no errors. I've done a yum update as well.
The problem is that only one of the to volume groups is recognized and mirrored (/boot), as apparently vgscan does not like the the large drives
(which aren't that large...). Any help is appreciated.
Zack
fstab: (the rootvg is supposed to be /dev/md1)
-----------------
/dev/rootvg/LogVol00 / ext3 defaults 1 1 /dev/md0 /boot ext3 defaults 1 2
----------------
/var/log/lvm2.log:
-----------------------commands/toolcontext.c:139 Logging initialised at Wed Jul 21 14:49:57 2004
commands/toolcontext.c:158 Set umask to 0077
lvmdiskscan.c:67 lvmdiskscan /dev/sda [ 33.92 GB] lvmdiskscan.c:67 lvmdiskscan /dev/md0 [ 101.75 MB] lvmdiskscan.c:67 lvmdiskscan /dev/md1 [ 32.81 GB] LVM physical
volume
lvmdiskscan.c:67 lvmdiskscan /dev/sda2 [ 1.00 GB]
lvmdiskscan.c:67 lvmdiskscan /dev/sdb [ 33.92 GB] LVM physical
volume
lvmdiskscan.c:67 lvmdiskscan /dev/sdb2 [ 1.00 GB]
lvmdiskscan.c:67 lvmdiskscan /dev/sdc [ 33.92 GB] LVM physical
volume
lvmdiskscan.c:67 lvmdiskscan /dev/sdc2 [ 1.00 GB]
lvmdiskscan.c:137 lvmdiskscan 1 disk lvmdiskscan.c:139 lvmdiskscan 4 partitions lvmdiskscan.c:142 lvmdiskscan 2 LVM physical volume whole disks lvmdiskscan.c:144 lvmdiskscan 1 LVM physical volume
commands/toolcontext.c:139 Logging initialised at Wed Jul 21 14:50:24 2004
commands/toolcontext.c:158 Set umask to 0077commands/toolcontext.c:139 Logging initialised at Wed Jul 21 14:50:36 2004
commands/toolcontext.c:158 Set umask to 0077
vgscan.c:51 vgscan Wiping cache of LVM-capable devices vgscan.c:54 vgscan Wiping internal cache vgscan.c:57 vgscan Reading all physical volumes. This may take a while...
toollib.c:414 vgscan Finding all volume groups toollib.c:330 vgscan Finding volume group "vg00" device/dev-io.c:79 vgscan Read size too large: 3191341056 format1/disk-rep.c:364 vgscan Failed to read extents from /dev/sdb device/dev-io.c:79 vgscan Read size too large: 3191341056 format1/disk-rep.c:364 vgscan Failed to read extents from /dev/sdb device/dev-io.c:79 vgscan Read size too large: 3191341056 format1/disk-rep.c:364 vgscan Failed to read extents from /dev/sdc vgscan.c:22 vgscan Volume group "vg00" not found toollib.c:330 vgscan Finding volume group "rootvg" vgscan.c:37 vgscan Found volume group "rootvg" using metadata type lvm2
Output of lvscan and pvscan:
-----------------------
# lvscan
Logging initialised at Thu Jul 22 09:40:45 2004 Set umask to 0077
lvscan Finding all logical volumes
lvscan Read size too large: 3191341056 lvscan Failed to read extents from /dev/sdb lvscan Read size too large: 3191341056 lvscan Failed to read extents from /dev/sdb lvscan Read size too large: 3191341056 lvscan Failed to read extents from /dev/sdc lvscan Volume group "vg00" not found lvscan ACTIVE '/dev/rootvg/LogVol00' [32.80 GB] next free
(default)
# pvscan
Logging initialised at Thu Jul 22 09:40:49 2004Set umask to 0077
pvscan Wiping cache of LVM-capable devices pvscan Wiping internal cache pvscan Walking through all physical volumes pvscan Read size too large: 3191341056 pvscan Failed to read extents from /dev/sdb pvscan Read size too large: 3191341056 pvscan Failed to read extents from /dev/sdb pvscan Read size too large: 3191341056 pvscan Failed to read extents from /dev/sdc pvscan PV /dev/md1 VG rootvg lvm2 [32.81 GB / 8.00 MB free] pvscan Total: 1 [32.81 GB] / in use: 1 [32.81 GB] / in no VG: 0 [0 ]
Quoted 10 lines · Zachary Hamm
Hello, I'm running Fedora Core 2 on a Dell Poweredge 1750 with three 36G SCSI drives setup with two volumes, /boot and /, setup with software RAID 1 with online spare. This was setup at install, which reported no errors. I've done a yum update as well.
The problem is that only one of the to volume groups is recognized and mirrored (/boot), as apparently vgscan does not like the the large drives
(which aren't that large...). Any help is appreciated.
It looks to me like you need to stop LVM looking at the "real" disks, and make it only look at the MD devices.
Either add a filter like "a/md*/" or add "md_component_detection = 1" to the devices section of the lvm.conf file - if you're running a recent lvm2 userspace.
Signature · 1 line
patrick
Thanks for the tip. But "md_component_detection = 1" is already set in my
lvm.conf file. Any other tips? Perhaps also linked to sometimes getting
an "out of memory" message when running the user tools?
-----------------------------------commands/toolcontext.c:139 Logging initialised at Wed Jul 21 13:48:44 2004
commands/toolcontext.c:158 Set umask to 0077
vgscan.c:51 vgscan Wiping cache of LVM-capable devices vgscan.c:54 vgscan Wiping internal cache vgscan.c:57 vgscan Reading all physical volumes. This may take a while...
toollib.c:414 vgscan Finding all volume groups toollib.c:330 vgscan Finding volume group "vg00" mm/pool-fast.c:224 vgscan Out of memory. Requested 3191341076 bytes. format1/disk-rep.c:364 vgscan Failed to read extents from /dev/sdb mm/pool-fast.c:224 vgscan Out of memory. Requested 3191341076 bytes. format1/disk-rep.c:364 vgscan Failed to read extents from /dev/sdb mm/pool-fast.c:224 vgscan Out of memory. Requested 3191341076 bytes. format1/disk-rep.c:364 vgscan Failed to read extents from /dev/sdc vgscan.c:22 vgscan Volume group "vg00" not found toollib.c:330 vgscan Finding volume group "rootvg" vgscan.c:37 vgscan Found volume group "rootvg" using metadata type lvm2
-------------------------------
The partition scheme on all three drives are the same:
--------------------------------------------------
# fdisk -l /dev/sda Disk /dev/sda: 36.4 GB, 36420075008 bytes 255 heads, 63 sectors/track, 4427 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 fd Linux raid autodetect /dev/sda2 14 144 1052257+ 82 Linux swap /dev/sda3 145 4427 34403197+ fd Linux raid autodetect --------------------------------------------------------------
----- Original Message -----
From: "Patrick Caulfield" <[email protected]>
To: "LVM general discussion and development" <[email protected]>
Sent: Thursday, July 22, 2004 11:34 AM
Subject: Re: [linux-lvm] LVM2 and RAID 1 not working on Fedora Core 2
Quoted 4 lines · Zachary Hamm
Quoted 3 lines
Hello, I'm running Fedora Core 2 on a Dell Poweredge 1750 with three 36G SCSI drives setup with two volumes, /boot and /, setup with software
RAID 1
Quoted 5 lines
Quoted 5 lines
with online spare. This was setup at install, which reported no errors. I've done a yum update as well.
The problem is that only one of the to volume groups is recognized and mirrored (/boot), as apparently vgscan does not like the the large
drives
Quoted 4 lines
Quoted 2 lines
(which aren't that large...). Any help is appreciated.
It looks to me like you need to stop LVM looking at the "real" disks, and
make
Quoted 3 lines
it only look at the MD devices.
Either add a filter like "a/md*/" or add "
md_component_detection= 1" to
the
Quoted 12 lines
devices section of the lvm.conf file - if you're running a recent lvm2 userspace.
Signature · 6 lines
patrick _______________________________________________ linux-lvm mailing list [email protected] https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Quoted 4 lines · Zachary Hamm
Thanks for the tip. But "
md_component_detection= 1" is already set in my
lvm.conf file. Any other tips? Perhaps also linked to sometimes getting
an "out of memory" message when running the user tools?
Did you try the filter? The OOM error is almost certainly caused by the tools reading an incorrect or corrupt header from the disk, and if your PVs are all MD devices then there's no reason for LVM to scan the underlying disks.
patrick
Changed the filter directed as suggested, no joy. I still get the same errors. Any other suggestions, or should I post more config information? There has to be something I'm missing.
Zack
----- Original Message -----
From: "Patrick Caulfield" <[email protected]>
To: "LVM general discussion and development" <[email protected]>
Sent: Friday, July 23, 2004 2:56 AM
Subject: Re: [linux-lvm] LVM2 and RAID 1 not working on Fedora Core 2
Quoted 2 lines · Zachary Hamm
Quoted 1 line
Thanks for the tip. But "
md_component_detection= 1" is already set in
my
Quoted 1 line
Quoted 1 line
lvm.conf file. Any other tips? Perhaps also linked to sometimes
getting
Quoted 4 lines
Quoted 2 lines
an "out of memory" message when running the user tools?
Did you try the filter? The OOM error is almost certainly caused by the
tools
Quoted 1 line
reading an incorrect or corrupt header from the disk, and if your PVs are
all MD
Quoted 9 lines
devices then there's no reason for LVM to scan the underlying disks.
patrick
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Quoted 5 lines · Zachary Hamm
Changed the filter directed as suggested, no joy. I still get the same errors. Any other suggestions, or should I post more config information? There has to be something I'm missing.
Can you tell me which drives are making up the MD devices and which (if any) are to be used by LVM directly?
Its possible that it's just the filter that needs more work. maybe something like:
filter = [ "a/md.*/", "r/.*/" ]
Signature · 1 line
patrick
Ahh. Okay, here's my config files:
/etc/raidtab:
----------------------------------
raiddev /dev/md1
raid-level 1 nr-raid-disks 2 chunk-size 256 persistent-superblock 1 nr-spare-disks 1
device /dev/sda3
raid-disk 0
device /dev/sdb3
raid-disk 1
device /dev/sdc3
spare-disk 0
raiddev /dev/md0
raid-level 1 nr-raid-disks 2 chunk-size 256 persistent-superblock 1 nr-spare-disks 1
device /dev/sda1
raid-disk 0
device /dev/sdb1
raid-disk 1
device /dev/sdc1
spare-disk 0
----------------------------------
/etc/fstab:
------------------------------------
/dev/rootvg/LogVol00 / ext3 defaults 1 1 /dev/md0 /boot ext3 defaults 1 2 none /dev/pts devpts gid=5,mode=620 0 0 none /dev/shm tmpfs defaults 0 0 none /proc proc defaults 0 0 none /sys sysfs defaults 0 0 /dev/sdc2 swap swap defaults 0 0 /dev/sdb2 swap swap defaults 0 0 /dev/sda2 swap swap defaults 0 0 /dev/cdrom /mnt/cdrom udf,iso9660
noauto,owner,kudzu,ro 0 0/dev/fd0 /mnt/floppy auto noauto,owner,kudzu 0
0
----------------------------------------------------------------------------
-
vgscan says:
--------------------------------------------------
Logging initialised at Tue Jul 27 19:32:00 2004
Set umask to 0077
vgscan Wiping cache of LVM-capable devices
vgscan Wiping internal cache
vgscan Reading all physical volumes. This may take a while...
vgscan Finding all volume groups
vgscan Finding volume group "vg00"
vgscan Read size too large: 3191341056 vgscan Failed to read extents from /dev/sdb vgscan Read size too large: 3191341056 vgscan Failed to read extents from /dev/sdb vgscan Read size too large: 3191341056 vgscan Failed to read extents from /dev/sdc vgscan Volume group "vg00" not found
vgscan Finding volume group "rootvg"
vgscan Found volume group "rootvg" using metadata type lvm2
----------------------------------------------------------------
Anything else I should be posting? BTW, are you here in Raleigh?
Thanks!
Zack
----- Original Message -----
From: "Patrick Caulfield" <[email protected]>
To: "LVM general discussion and development" <[email protected]>
Sent: Tuesday, July 27, 2004 3:18 AM
Subject: Re: [linux-lvm] LVM2 and RAID 1 not working on Fedora Core 2
Quoted 4 lines · Zachary Hamm
Quoted 3 lines
Changed the filter directed as suggested, no joy. I still get the same errors. Any other suggestions, or should I post more config
information?
Quoted 4 lines
Quoted 2 lines
There has to be something I'm missing.
Can you tell me which drives are making up the MD devices and which (if
any)
Quoted 3 lines
are to be used by LVM directly?
Its possible that it's just the filter that needs more work. maybe
something
Quoted 12 lines
like:
filter = [ "a/md.*/", "r/.*/" ]
Signature · 6 lines
patrick _______________________________________________ linux-lvm mailing list [email protected] https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Quoted 1 line · Zachary Hamm
Anything else I should be posting? BTW, are you here in Raleigh?
please edit lvm.conf so that it produces a full debug and post that. besides how big are your drives?
L.
Signature · 6 lines
Luca Berra -- [email protected] Communication Media & Services S.r.l. /"\ \ / ASCII RIBBON CAMPAIGN X AGAINST HTML MAIL / \
Attached is the lvm2.log file with debug at setting 6 (setting to level 7 created a 7M file!)
The drives are Three 36G SCSI drives, setup as a RAID1 mirror with hot spare.
/etc/raidtab:
----------------------------------------------------
raiddev /dev/md1
raid-level 1 nr-raid-disks 2 chunk-size 256 persistent-superblock 1 nr-spare-disks 1
device /dev/sda3
raid-disk 0
device /dev/sdb3
raid-disk 1
device /dev/sdc3
spare-disk 0
raiddev /dev/md0
raid-level 1 nr-raid-disks 2 chunk-size 256 persistent-superblock 1 nr-spare-disks 1
device /dev/sda1
raid-disk 0
device /dev/sdb1
raid-disk 1
device /dev/sdc1
spare-disk 0
----- Original Message -----
From: "Luca Berra" <[email protected]>
To: "LVM general discussion and development" <[email protected]>
Sent: Wednesday, July 28, 2004 1:39 AM
Subject: Re: [linux-lvm] LVM2 and RAID 1 not working on Fedora Core 2
Quoted 20 lines · Zachary Hamm
Quoted 1 line
Anything else I should be posting? BTW, are you here in Raleigh?
please edit lvm.conf so that it produces a full debug and post that. besides how big are your drives?
L.
Signature · 11 lines
Luca Berra -- [email protected] Communication Media & Services S.r.l. /"\ \ / ASCII RIBBON CAMPAIGN X AGAINST HTML MAIL / \ _______________________________________________ linux-lvm mailing list [email protected] https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
config/config.c:800 log/activation not found in config: defaulting to 0commands/toolcontext.c:139 Logging initialised at Thu Jul 29 22:53:59 2004
config/config.c:795 Setting global/umask to 63commands/toolcontext.c:158 Set umask to 0077
config/config.c:780 Setting devices/dir to /dev config/config.c:780 Setting global/proc to /proc config/config.c:795 Setting global/activation to 1 config/config.c:800 global/suffix not found in config: defaulting to 1 config/config.c:786 global/units not found in config: defaulting to h config/config.c:780 Setting devices/cache to /etc/lvm/.cache config/config.c:795 Setting devices/write_cache_state to 1 config/config.c:795 Setting activation/reserved_stack to 256 config/config.c:795 Setting activation/reserved_memory to 8192 config/config.c:795 Setting activation/process_priority to -18 config/config.c:786 global/format not found in config: defaulting to lvm2 commands/toolcontext.c:537 No tags defined in config file config/config.c:795 Setting backup/retain_days to 30 config/config.c:795 Setting backup/retain_min to 10 config/config.c:780 Setting backup/archive_dir to /etc/lvm/archive config/config.c:780 Setting backup/backup_dir to /etc/lvm/backup config/config.c:800 global/fallback_to_lvm1 not found in config: defaulting to 1 config/config.c:795 pvscan Setting global/locking_type to 1 config/config.c:780 pvscan Setting global/locking_dir to /var/lock/lvm locking/locking.c:137 pvscan File-based locking enabled. pvscan.c:127 pvscan Wiping cache of LVM-capable devices pvscan.c:130 pvscan Wiping internal cache pvscan.c:133 pvscan Walking through all physical volumes
device/dev-io.c:220 pvscan Getting size of /dev/sda label/label.c:183 pvscan /dev/sda: No label detected device/dev-io.c:220 pvscan Getting size of /dev/md0 label/label.c:183 pvscan /dev/md0: No label detected device/dev-io.c:220 pvscan Getting size of /dev/sda1 device/dev-io.c:220 pvscan Getting size of /dev/md1 label/label.c:165 pvscan /dev/md1: lvm2 label detected device/dev-io.c:220 pvscan Getting size of /dev/sda2 label/label.c:183 pvscan /dev/sda2: No label detected device/dev-io.c:220 pvscan Getting size of /dev/sda3 device/dev-io.c:220 pvscan Getting size of /dev/sdb label/label.c:165 pvscan /dev/sdb: lvm1 label detected device/dev-io.c:220 pvscan Getting size of /dev/sdb1 device/dev-io.c:220 pvscan Getting size of /dev/sdb2 label/label.c:183 pvscan /dev/sdb2: No label detected device/dev-io.c:220 pvscan Getting size of /dev/sdb3 device/dev-io.c:220 pvscan Getting size of /dev/sdc label/label.c:165 pvscan /dev/sdc: lvm1 label detected device/dev-io.c:220 pvscan Getting size of /dev/sdc1 device/dev-io.c:220 pvscan Getting size of /dev/sdc2 label/label.c:183 pvscan /dev/sdc2: No label detected device/dev-io.c:220 pvscan Getting size of /dev/sdc3 device/dev-io.c:79 pvscan Read size too large: 3191341056
format1/disk-rep.c:364 pvscan Failed to read extents from /dev/sdb format1/disk-rep.c:152 pvscan /dev/sda does not have a valid LVM1 PV identifier format1/disk-rep.c:152 pvscan /dev/md0 does not have a valid LVM1 PV identifier format1/disk-rep.c:152 pvscan /dev/md1 does not have a valid LVM1 PV identifier format1/disk-rep.c:152 pvscan /dev/sda2 does not have a valid LVM1 PV identifier
device/dev-io.c:79 pvscan Read size too large: 3191341056 format1/disk-rep.c:364 pvscan Failed to read extents from /dev/sdb format1/disk-rep.c:152 pvscan /dev/sdb2 does not have a valid LVM1 PV identifier device/dev-io.c:79 pvscan Read size too large: 3191341056 format1/disk-rep.c:364 pvscan Failed to read extents from /dev/sdc format1/disk-rep.c:152 pvscan /dev/sdc2 does not have a valid LVM1 PV identifier label/label.c:165 pvscan /dev/md1: lvm2 label detected
pvscan.c:97 pvscan PV /dev/md1 VG rootvg lvm2 [32.81 GB / 8.00 MB free]
pvscan.c:195 pvscan Total: 1 [32.81 GB] / in use: 1 [32.81 GB] / in no VG: 0 [0 ]filters/filter-persistent.c:179 pvscan Dumping persistent device cache to /etc/lvm/.cacheconfig/config.c:800 log/activation not found in config: defaulting to 0commands/toolcontext.c:139 Logging initialised at Thu Jul 29 22:54:02 2004
config/config.c:795 Setting global/umask to 63commands/toolcontext.c:158 Set umask to 0077
config/config.c:780 Setting devices/dir to /dev config/config.c:780 Setting global/proc to /proc config/config.c:795 Setting global/activation to 1 config/config.c:800 global/suffix not found in config: defaulting to 1 config/config.c:786 global/units not found in config: defaulting to h config/config.c:780 Setting devices/cache to /etc/lvm/.cache config/config.c:795 Setting devices/write_cache_state to 1 filters/filter-persistent.c:125 Loaded persistent filter cache from /etc/lvm/.cache config/config.c:795 Setting activation/reserved_stack to 256 config/config.c:795 Setting activation/reserved_memory to 8192 config/config.c:795 Setting activation/process_priority to -18 config/config.c:786 global/format not found in config: defaulting to lvm2 commands/toolcontext.c:537 No tags defined in config file config/config.c:795 Setting backup/retain_days to 30 config/config.c:795 Setting backup/retain_min to 10 config/config.c:780 Setting backup/archive_dir to /etc/lvm/archive config/config.c:780 Setting backup/backup_dir to /etc/lvm/backup config/config.c:800 global/fallback_to_lvm1 not found in config: defaulting to 1 config/config.c:795 vgscan Setting global/locking_type to 1 config/config.c:780 vgscan Setting global/locking_dir to /var/lock/lvm locking/locking.c:137 vgscan File-based locking enabled. vgscan.c:51 vgscan Wiping cache of LVM-capable devices vgscan.c:54 vgscan Wiping internal cache vgscan.c:57 vgscan Reading all physical volumes. This may take a while...
toollib.c:414 vgscan Finding all volume groups device/dev-io.c:220 vgscan Getting size of /dev/sda label/label.c:183 vgscan /dev/sda: No label detected device/dev-io.c:220 vgscan Getting size of /dev/md0 label/label.c:183 vgscan /dev/md0: No label detected device/dev-io.c:220 vgscan Getting size of /dev/sda1 device/dev-io.c:220 vgscan Getting size of /dev/md1 label/label.c:165 vgscan /dev/md1: lvm2 label detected device/dev-io.c:220 vgscan Getting size of /dev/sda2 label/label.c:183 vgscan /dev/sda2: No label detected device/dev-io.c:220 vgscan Getting size of /dev/sda3 device/dev-io.c:220 vgscan Getting size of /dev/sdb label/label.c:165 vgscan /dev/sdb: lvm1 label detected device/dev-io.c:220 vgscan Getting size of /dev/sdb1 device/dev-io.c:220 vgscan Getting size of /dev/sdb2 label/label.c:183 vgscan /dev/sdb2: No label detected device/dev-io.c:220 vgscan Getting size of /dev/sdb3 device/dev-io.c:220 vgscan Getting size of /dev/sdc label/label.c:165 vgscan /dev/sdc: lvm1 label detected device/dev-io.c:220 vgscan Getting size of /dev/sdc1 device/dev-io.c:220 vgscan Getting size of /dev/sdc2 label/label.c:183 vgscan /dev/sdc2: No label detected device/dev-io.c:220 vgscan Getting size of /dev/sdc3 locking/file_locking.c:162 vgscan Locking /var/lock/lvm/V_vg00 RB toollib.c:330 vgscan Finding volume group "vg00" device/dev-io.c:79 vgscan Read size too large: 3191341056
format1/disk-rep.c:364 vgscan Failed to read extents from /dev/sdb format1/disk-rep.c:152 vgscan /dev/sda does not have a valid LVM1 PV identifier format1/disk-rep.c:152 vgscan /dev/md0 does not have a valid LVM1 PV identifier format1/disk-rep.c:152 vgscan /dev/md1 does not have a valid LVM1 PV identifier format1/disk-rep.c:152 vgscan /dev/sda2 does not have a valid LVM1 PV identifier
device/dev-io.c:79 vgscan Read size too large: 3191341056 format1/disk-rep.c:364 vgscan Failed to read extents from /dev/sdb format1/disk-rep.c:152 vgscan /dev/sdb2 does not have a valid LVM1 PV identifier device/dev-io.c:79 vgscan Read size too large: 3191341056 format1/disk-rep.c:364 vgscan Failed to read extents from /dev/sdc format1/disk-rep.c:152 vgscan /dev/sdc2 does not have a valid LVM1 PV identifier vgscan.c:22 vgscan Volume group "vg00" not found locking/file_locking.c:59 vgscan Unlocking /var/lock/lvm/V_vg00 locking/file_locking.c:162 vgscan Locking /var/lock/lvm/V_rootvg RB toollib.c:330 vgscan Finding volume group "rootvg" label/label.c:165 vgscan /dev/md1: lvm2 label detected
vgscan.c:37 vgscan Found volume group "rootvg" using metadata type lvm2 locking/file_locking.c:59 vgscan Unlocking /var/lock/lvm/V_rootvg filters/filter-persistent.c:179 vgscan Dumping persistent device cache to /etc/lvm/.cacheconfig/config.c:800 log/activation not found in config: defaulting to 0commands/toolcontext.c:139 Logging initialised at Thu Jul 29 22:54:10 2004
config/config.c:795 Setting global/umask to 63commands/toolcontext.c:158 Set umask to 0077
config/config.c:780 Setting devices/dir to /dev config/config.c:780 Setting global/proc to /proc config/config.c:795 Setting global/activation to 1 config/config.c:800 global/suffix not found in config: defaulting to 1 config/config.c:786 global/units not found in config: defaulting to h config/config.c:780 Setting devices/cache to /etc/lvm/.cache config/config.c:795 Setting devices/write_cache_state to 1 filters/filter-persistent.c:125 Loaded persistent filter cache from /etc/lvm/.cache config/config.c:795 Setting activation/reserved_stack to 256 config/config.c:795 Setting activation/reserved_memory to 8192 config/config.c:795 Setting activation/process_priority to -18 config/config.c:786 global/format not found in config: defaulting to lvm2 commands/toolcontext.c:537 No tags defined in config file config/config.c:795 Setting backup/retain_days to 30 config/config.c:795 Setting backup/retain_min to 10 config/config.c:780 Setting backup/archive_dir to /etc/lvm/archive config/config.c:780 Setting backup/backup_dir to /etc/lvm/backup config/config.c:800 global/fallback_to_lvm1 not found in config: defaulting to 1
config/config.c:795 lvscan Setting global/locking_type to 1 config/config.c:780 lvscan Setting global/locking_dir to /var/lock/lvm locking/locking.c:137 lvscan File-based locking enabled. toollib.c:223 lvscan Finding all logical volumes
label/label.c:183 lvscan /dev/sda: No label detected label/label.c:183 lvscan /dev/md0: No label detected label/label.c:165 lvscan /dev/md1: lvm2 label detected label/label.c:183 lvscan /dev/sda2: No label detected label/label.c:165 lvscan /dev/sdb: lvm1 label detected label/label.c:183 lvscan /dev/sdb2: No label detected label/label.c:165 lvscan /dev/sdc: lvm1 label detected label/label.c:183 lvscan /dev/sdc2: No label detected locking/file_locking.c:162 lvscan Locking /var/lock/lvm/V_vg00 RB device/dev-io.c:79 lvscan Read size too large: 3191341056 format1/disk-rep.c:364 lvscan Failed to read extents from /dev/sdb format1/disk-rep.c:152 lvscan /dev/sda does not have a valid LVM1 PV identifier format1/disk-rep.c:152 lvscan /dev/md0 does not have a valid LVM1 PV identifier format1/disk-rep.c:152 lvscan /dev/md1 does not have a valid LVM1 PV identifier format1/disk-rep.c:152 lvscan /dev/sda2 does not have a valid LVM1 PV identifier
device/dev-io.c:79 lvscan Read size too large: 3191341056 format1/disk-rep.c:364 lvscan Failed to read extents from /dev/sdb format1/disk-rep.c:152 lvscan /dev/sdb2 does not have a valid LVM1 PV identifier device/dev-io.c:79 lvscan Read size too large: 3191341056 format1/disk-rep.c:364 lvscan Failed to read extents from /dev/sdc format1/disk-rep.c:152 lvscan /dev/sdc2 does not have a valid LVM1 PV identifier locking/file_locking.c:59 lvscan Unlocking /var/lock/lvm/V_vg00 toollib.c:247 lvscan Volume group "vg00" not found locking/file_locking.c:162 lvscan Locking /var/lock/lvm/V_rootvg RB label/label.c:165 lvscan /dev/md1: lvm2 label detected config/config.c:780 lvscan Setting activation/missing_stripe_filler to /dev/ioerror config/config.c:795 lvscan Setting activation/mirror_region_size to 512
lvscan.c:43 lvscan ACTIVE '/dev/rootvg/LogVol00' [32.80 GB] next free
(default)locking/file_locking.c:59 lvscan Unlocking /var/lock/lvm/V_rootvg filters/filter-persistent.c:179 lvscan Dumping persistent device cache to /etc/lvm/.cache