Skip to contentSkip to conversation

Terratec Phase 28

DISCUSSION Marco 3 participants 6 messages Jul 18, 2004 – Jul 27, 2004

lore
Share & tools
lore

Marco

author
#0 lore raw

Hi,
Will the Terratec Phase 28 card be supported in future releases of Alsa? The chip is a VIA VT1724 [Envy24HT], which is currently supported, but that card itself is not on the list of those with that chip that are supported, and it's obviously not recognized by the driver. It has 2 analogic input cannel and 8 output (both with 192khz/24 bit support - tested on Windows), 1 digital in and 1 out, 1 midi in and 1 out.
I think it's no very different from the Aureon 7.1 (which is supported) and therefore there's need for only a few informations to make it work.
Is anyone working on it? Can I help somehow?

Thanks.

-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click

author
#1 lore raw

Hi,
Will the Terratec Phase 28 card be supported in future releases of Alsa? The chip is a VIA VT1724 [Envy24HT], which is currently supported, but that card itself is not on the list of those with that chip that are supported, and it's obviously not recognized by the driver. It has 2 analogic input cannel and 8 output (both with 192khz/24 bit support - tested on Windows), 1 digital in and 1 out, 1 midi in and 1 out.
I think it's no very different from the Aureon 7.1 (which is supported) and therefore there's need for only a few informations to make it work.
Is anyone working on it? Can I help somehow?

Thanks.

-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click

#2 lore raw
In reply to Marco

Am Sonntag, 18. Juli 2004 20:54 schrieb Marco:

Quoted 4 lines

Hi,
Will the Terratec Phase 28 card be supported in future releases of Alsa? The chip is a VIA VT1724 [Envy24HT], which is currently supported, but that card itself is not on the list of those with that chip that are

Quoted 9 lines

supported, and it's obviously not recognized by the driver. It has 2 analogic input cannel and 8 output (both with 192khz/24 bit support - tested on Windows), 1 digital in and 1 out, 1 midi in and 1 out.
I think it's no very different from the Aureon 7.1 (which is supported) and therefore there's need for only a few informations to make it work.
Is anyone working on it?

Doesen't seem so.

My dirty solution for the Phase88 was:

Read the soundcard-ID
---

# cat /proc/asound/card1/ice1712
TerraTec EWS88MT at 0xa400, irq 10

EEPROM:
Subvendor : 0x3b155111
...
---

Then write the ID instead of the one of EWS88MT_NEW into the module. Recompile modules. Reboot. And... it works (not all perfectly but it works).

--- ews.h
//#define ICE1712_SUBDEVICE_EWS88MT_NEW 0x3b152511 #define ICE1712_SUBDEVICE_EWS88MT_NEW   0x3b155111 --

Quoted 1 line

Can I help somehow?

Invest some time and find a better solution.

-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_idG21&alloc_id040&op=click

#3 lore raw

At Wed, 21 Jul 2004 01:48:09 +0200,

Quoted 16 lines · Siegfried Kettlitz

Am Sonntag, 18. Juli 2004 20:54 schrieb Marco:

Quoted 4 lines

Hi,
Will the Terratec Phase 28 card be supported in future releases of Alsa? The chip is a VIA VT1724 [Envy24HT], which is currently supported, but that card itself is not on the list of those with that chip that are

Quoted 9 lines

supported, and it's obviously not recognized by the driver. It has 2 analogic input cannel and 8 output (both with 192khz/24 bit support - tested on Windows), 1 digital in and 1 out, 1 midi in and 1 out.
I think it's no very different from the Aureon 7.1 (which is supported) and therefore there's need for only a few informations to make it work.
Is anyone working on it?

Quoted 1 line

Doesen't seem so.

Phase88 is a totally different board from Phase28.
The former is based on ICE1712 while the latter ICE1724 (VT1724).

Quoted 1 line

My dirty solution for the Phase88 was:

The patch for phase88 is already on cvs.
It just like your solution, working as another EWS88MT model.

Takashi

-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click

#4 lore raw
Quoted 2 lines

Phase88 is a totally different board from Phase28.
The former is based on ICE1712 while the latter ICE1724 (VT1724).

Didn't actually know anything about it, just guessed blindly.

Quoted 3 lines

The patch for phase88 is already on cvs.
It just like your solution, working as another EWS88MT model.

That's good news :)

-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click

#5 lore raw
In reply to Marco

At Sun, 18 Jul 2004 20:54:47 +0200,

Quoted 13 lines · Marco

Hi,
Will the Terratec Phase 28 card be supported in future releases of Alsa? The chip is a VIA VT1724 [Envy24HT], which is currently supported, but that card itself is not on the list of those with that chip that are supported, and it's obviously not recognized by the driver. It has 2 analogic input cannel and 8 output (both with 192khz/24 bit support - tested on Windows), 1 digital in and 1 out, 1 midi in and 1 out.
I think it's no very different from the Aureon 7.1 (which is supported) and therefore there's need for only a few informations to make it work.
Is anyone working on it? Can I help somehow?

As a first step, you can try to pass 'model=aureon71' option to snd-ice1724 driver, so that the driver supposes the card is aureon 7.1.

But I'm wondering how to handle 2 analog inputs and spdif input at the same time. On VT1724, usually spdif-in is handled with RDMA1...

Takashi

-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click