: Support for Exar XR17C158 Octal UART
PATCH 1/1 : Support for Exar XR17C158 Octal UART
Hello,
here a minimal patch to support the Exar Corp. XR17C158 Octal UART Chip (PCI).
Regards,
Raphael
Signed-off-by Raphael Zimmerer <[email protected]>
drivers/serial/8250_pci.c | 22 ++++++++++++++++++++++ include/linux/pci_ids.h | 3 +++ 2 files changed, 25 insertions(+)
drivers/serial/8250_pci.c +22 -0
@@ -630,6 +630,17 @@ .setup = afavlab_setup, },/* +* Exar Corp. XR17C158 Octal UART +* Only basic 16550A support. +*/ + { + .vendor = PCI_VENDOR_ID_EXAR, + .device = PCI_DEVICE_ID_EXAR_XR17C158, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_default_setup, + }, +/* * HP Diva */ {
@@ -1069,6 +1080,7 @@ pbn_computone_6, pbn_computone_8, pbn_sbsxrsio, + pbn_exar_XR17C158, };/*
@@ -1489,6 +1501,12 @@ .base_baud = 460800, .uart_offset = 256, .reg_shift = 4, + }, + [pbn_exar_XR17C158] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 921600, + .uart_offset = 0x200, } };
@@ -1759,6 +1777,10 @@ }static struct pci_device_id serial_pci_tbl[] = { + {PCI_VENDOR_ID_EXAR ,PCI_DEVICE_ID_EXAR_XR17C158 , +PCI_ANY_ID ,PCI_ANY_ID , +0 , +0 , pbn_exar_XR17C158 }, {PCI_VENDOR_ID_V3 ,PCI_DEVICE_ID_V3_V960 ,PCI_SUBVENDOR_ID_CONNECT_TECH ,PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232 ,0 ,0 ,
include/linux/pci_ids.h +3 -0
@@ -1794,6 +1794,9 @@#define PCI_DEVICE_ID_CCD_B00C 0xb00c#define PCI_DEVICE_ID_CCD_B100 0xb100 +#define PCI_VENDOR_ID_EXAR 0x13a8 +#define PCI_DEVICE_ID_EXAR_XR17C158 0x0158 +#define PCI_VENDOR_ID_MICROGATE 0x13c0#define PCI_DEVICE_ID_MICROGATE_USC 0x0010#define PCI_DEVICE_ID_MICROGATE_SCC 0x0020