2.6.7-ck6: Yenta TI: irq 5: nobody cared!

Hi !

I got the following message in /var/log/message the last time I booted my laptop. Since the cardbus driver had a problem with it's irq my WLAN network card didn't work :(

Linux Kernel Card Services
options: [pci] [cardbus] [pm]
Yenta: CardBus bridge found at 0000:00:0c.0 [1558:0402]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0c.0, mfunc 0x01001002, devctl 0x44 irq 5: nobody cared!

[<c01074e9>] __report_bad_irq+0x2a/0x8b
[<c01075d3>] note_interrupt+0x6f/0x9f
[<c01077c3>] do_IRQ+0xdd/0xdf
[<c0105ebc>] common_interrupt+0x18/0x20
[<c011a61b>] __do_softirq+0x2f/0x80
[<c011a692>] do_softirq+0x26/0x28
[<c01077aa>] do_IRQ+0xc4/0xdf
[<c0105ebc>] common_interrupt+0x18/0x20
[<c020b7df>] pci_bus_write_config_word+0x4a/0x5a
[<f8ae40e0>] yenta_probe_cb_irq+0x6b/0x12e [yenta_socket]
[<f8ae32db>] ti12xx_irqroute_func0+0x8f/0x347 [yenta_socket]
[<c0117848>] printk+0xfe/0x12f
[<f8ae39f0>] ti12xx_override+0xbf/0x15e [yenta_socket]
[<f8ae3b1c>] ti1250_override+0x8d/0x99 [yenta_socket]
[<f8ae4583>] yenta_probe+0x210/0x22f [yenta_socket]
[<c020ea6b>] pci_device_probe_static+0x52/0x61
[<c020eab5>] __pci_device_probe+0x3b/0x4e
[<c020eaf4>] pci_device_probe+0x2c/0x4a
[<c026aff5>] bus_match+0x3f/0x6a
[<c026b107>] driver_attach+0x56/0x80
[<c026b38b>] bus_add_driver+0x91/0xa3
[<c026b7ad>] driver_register+0x2f/0x33
[<c020ed33>] pci_register_driver+0x5c/0x84
[<f89e800f>] yenta_socket_init+0xf/0x13 [yenta_socket]
[<c012a040>] sys_init_module+0x106/0x1cf
[<c0105d4f>] syscall_call+0x7/0xb

handlers:
[<f8a3876e>] (snd_intel8x0_interrupt+0x0/0x1e0 [snd_intel8x0]) Disabling IRQ #5
Yenta TI: socket 0000:00:0c.0 probing PCI interrupt failed, trying to fix Yenta TI: socket 0000:00:0c.0 no PCI interrupts. Fish. Please report.
Yenta: ISA IRQ mask 0x0000, PCI irq 0
Socket status: 30000019

I've attached /var/log/message. You can see other details of my computer config at http://www.rototor.de/sonstiges .

Whats wrong here?

cu,
Emmy

P.S.: CC please, since I'm not subscribed.
P.P.S.: Yes, the kernel is tainted by the vmware modules. But that should not be related, should it?

No idea - always try running without proprietary modules to check that it is indeed a stock kernel problem. I suspect it will be in this case, but please check anyway.

Also, you may like to consider reporting the problem (without VMware loaded) to the linux-pcmcia list at lists.infradead.org, where the guys who developed this probing code hang out.

Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:  2.6 PCMCIA      - http://pcmcia.arm.linux.org.uk/
                 2.6 Serial core