2.6.8-rc2-mm2

ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.8-rc2/2.6.8-rc2-mm2/

- Some fairly significant changes to the RCU code. Should address scheduling latency issues which we've seen in there.

- Various changes to the writeback code - mainly to support concurrent O_SYNC writers to the same file. Also arrange for O_SYNC writes to sync only the part of the file which the caller actually wrote. Database stuff.

- Added Con's staircase CPU scheduler.

This will probably have to come out again because various people are still fiddling with the CPU scheduler. But my feeling here is that the current 1st-gen CPU scheduler has been tweaked as far as it can go and is still not 100% right. It is time to start thinking about a new design which addresses the requirements and current problems by algorithmic means rather than by tweaking. Removing over 300 lines from the scheduler is a good sign.

Feedback on this patch is sought.

- Added Rik's token-based load control patch. The VM currently has pretty bad performance problems under heavy swapping loads and this patch speeds up simple tests most impressively. People who care about these things: please test and measure.

- Tons of new fixes and cleanups and updates to various things as usual.

- Again, 2.6.8 is close, so if people have critical fixes in here which need flushing out, please ping me.

Changes since 2.6.8-rc2-mm1:

linus.patch
bk-acpi.patch
bk-alsa.patch
bk-dma-declare-coherent-memory.patch
bk-cpufreq.patch
bk-drm.patch
bk-ieee1394.patch
bk-input.patch
bk-libata.patch
bk-netdev.patch
bk-ntfs.patch
bk-pci.patch
bk-pnp.patch
bk-power.patch
bk-scsi.patch
bk-usb.patch

Latest versions of external trees

-fixes-for-rcu_offline_cpu-rcu_move_batch-268-rc2.patch -unix98-pty-indices-leak.patch -sched-initialize-sched-domain-table.patch -compat_clock_getres-shouldnt-return-efault-if-res-==-null.patch -bio-page-refcounting-fix.patch -bk-acpi-x86_cpu_to_apicid-fix.patch -ppc64-page-align-emergency-stack-2.patch -ppc64-remove-multiple-irq-optimisation.patch -ppc64-cpu-hotplug-fix.patch -ppc64-whitespace-cleanup-in-promc.patch -ppc64-hvcs-driver.patch
-ppc64-smt-bugfix.patch -ppc32-fix-ppc44x-early-uart-setup.patch -ppc32-export-some-dma-api-symbols.patch -ppc32-fix-comment-in-arch-ppc-platforms-pmac_pcic.patch -enable-suspend-resuming-of-e1000.patch -i810_audio-mmio-support.patch -i810_audio-mmio-support-2.patch
-ia64-ptrace-fix-fix.patch -possible-buglet-in-drivers-input-joystick-tmdcc.patch -gcc35-advansys.c.patch
-gcc35-arlan.h.patch
-gcc35-fore200e.c.patch
-gcc35-index.html.patch
-gcc35-ip6_fib.c.patch
-gcc35-iphase.h.patch
-gcc35-irttp.h.patch
-gcc35-netrom.h.patch
-gcc35-pppoe.c.patch
-gcc35-usblp.c.patch
-gcc35-xfrm6_state.c.patch -fix-rivafbs-nv_arch_-cleanup-debug-backlight-control-on-ppc.patch -fix-rivafbs-nv_arch_-cleanup-debug-backlight-control-on-ppc-fix.patch -hugetlbfs-vm_pgoff-bugs.patch -unknown-symbol-in-drivers-scsi-pcmcia-fdomain_csko.patch -fix-double-reset-in-aic7xxx-driver.patch -v850-define-find_first_bit.patch
-radeonfb-64-bit-fix.patch -net-sunrpc-xprtc-gcc341-inlining-fix.patch -switch-sgc-to-standard-jiffies-converters.patch -sign-fix-in-swapfilec.patch -a-trivial-patch-for-removing-unnecessary-comment-in-mm-filemapc.patch -fix-for-buffer-limit-for-long-in-sysctlc.patch -ipmi_msghandler-module-load-failure-fix.patch -remove-scripts-mkconfigs.patch
-267-msi-x-update.patch -fix-readahead-breakage-for-sequential-after-random-reads.patch -update-mailing-list-for-osst.patch
-fix-aic-for-db4.patch
-m68k-68060-errata-i14.patch
-m68k-ifpsp060.patch
-m68k-sparse-missing-void.patch
-m68k-sparse-if-vs-ifdef.patch
-m68k-sparse-void-return.patch
-m68k-sparse-extern.patch
-m68k-sparse-inline.patch
-dsp56k-sparse-const.patch
-m68k-sparse-floating-point.patch -dnfb-sparse-struct-init.patch
-amifb-sparse-=.patch
-m68k-hardirqh.patch
-dmasound-paths.patch
-m68k-bitops.patch
-m68k-checksum-include.patch
-m68k-pgalloc-fixup.patch
-m68k-maintainership.patch -depends-on-pci-multi-tech-synclink-applicom-serial.patch -pci-warnings-moxa-serial.patch -pci-warnings-specialix-serial.patch -depends-on-pci-via686a-i2c.patch -depends-on-pci-dma-api-ieee1394-core-and-sbp-2.patch -depends-on-pci-fritzpci-pciv2-pnp-and-hysdn.patch -pci-warnings-hisax-isdn.patch -depends-on-pci-guillemot-maxi-radio-fm-2000.patch -depends-on-pci-technisat-skystar2-pci.patch -depends-on-pci-dma-api-cisco-aironet-34x-35x-4500-4800.patch -depends-on-pci-toshiba-and-via-fir.patch -depends-on-pci-matrox-1-wire.patch -dallas-1-wire-delayh.patch
-linux-mmzoneh-const.patch -cirrusfb-update-for-amiga-zorro.patch -page_cache_readahead-unused-variable.patch -remove-faulty-__inits-from-drivers-video-fbmemc-fwd.patch -export-all-functions-in-lib-stringc.patch -hlist_for_each_safe-cleanup.patch -front-buttons-wouldnt-mute-ess-maestro.patch -ipv6-routec-gcc-341-fix-inline.patch -config-file-for-laptop-mode.patch -add-documentation-about-proc-sys-vm-laptop_mode-to-various-docs.patch -automatically-disable-laptop-mode-when-battery-almost-runs-out.patch -ppc32-snd-powermac-requires-i2c.patch -ext2_readdir-retval-fix.patch
-ncpfs-setattr-retval-fix.patch -recommend-noapic-when-timer-via-ioapic-fails.patch -s390-core-changes.patch
-s390-zfcp-host-adapter.patch -s390-network-driver-changes.patch
-dvb-major-number.patch -selinux-fix-clearing-of-new-personality-bit-on-security-transitions.patch -lost-error-code-in-rescan_partitions.patch -trivial-doc-patch-for-partitions.patch -rename-config_pci_use_vector-to-config_pci_msi.patch -fix-bogus-ioctl-return-in-mtrr.patch
-remove-boot98.patch -writepages-drops-bh-on-not-uptodate-page.patch -critical-x86-64-patches-for-268rc2.patch

Merged

-sysfs-leaves-mount.patch
-sysfs-leaves-dir.patch
-sysfs-leaves-file.patch
-sysfs-leaves-bin.patch
-sysfs-leaves-symlink.patch
-sysfs-leaves-misc.patch +sysfs-backing-store-add-sysfs_dirent-to-sysfs-dentry.patch +sysfs-backing-store-use-sysfs_dirent-tree-for-readdir-etc.patch +sysfs-backing-store-free-sysfs_dirent-on-file-removal.patch +sysfs-backing-store-change-sysfs_file_operations.patch +sysfs-backing-store-stop-pinning-dentries-inodes-for-leaves.patch

Updated backing-store-for-sysfs patches

+sched-use-for_each_cpu.patch

CPU hotunplug fix

+fix-bsd-accounting-cross-platform-compatibility.patch

BSD accounting format fix

+mm-swsusp-make-sure-we-do-not-return-to-userspace-where-image-is-on-disk.patch +mm-swsusp-copy_page-is-harmfull.patch

swsusp fixes

+ppc64-__make_room-warning-fix.patch +ppc64-fix-off-by-one-in-mem_init.patch +ppc64-struct-pci_controller-cleanup.patch +ppc64-isa-device-tree-node-refcount-fix.patch +ppc64-fix-hotplug-irq-migration-code.patch +ppc64-fix-cpu_up-race.patch +ppc64-improve-slb-reload.patch +ppc64-remove-include-processorh-from-div64s.patch

ppc64 updates

+ppc32-support-for-mpc8560-cpu-and-boards.patch
+ppc32-support-for-mpc8555-cpu-and-board.patch

ppc32 updates

+dev-mem-restriction-patch.patch

Restrict the memory which may be accessed via /dev/mem (x86 only).

Disable /dev/kmem writes altogether.

+sched-merge-fix.patch

CPU scheduler fix

+sched-isolated-sched-domains.patch
+sched-isolated-sched-domains-fix.patch
+create-cpu_sibling_map-for-ppc64.patch
+create-cpu_sibling_map-for-ppc64-fix.patch
+sched-adjust-p4-per-cpu-gain.patch

CPU scheduler updates

+sysctl-tunable-for-flexmmap.patch
+legacy_va_layout-docs.patch

Create /proc/sys/vm/legacy_va_layout - it switches the mmap layout back to the old version, system-wide.

+packet-remove-warning.patch +packet-door-unlock.patch +pkt_lock_door-warning-fix.patch +trivial-cdrw-packet-writing-doc-update.patch +simplified-request-size-handling-in-cdrw-packet-writing.patch +fix-setting-of-maximum-read-speed-in-cdrw-packet-writing.patch

Packet driver updates

+uml-remove-a-group-of-unused-bh-functions.patch

UML cleanup

+bio_copy_user-cleanups.patch

Fix BIO copy-to-userspace handling

+journal_clean_checkpoint_list-latency-fix-fix.patch

Fix the fix for recuding latency in JBD.

+e1000-inlining-fix.patch

gcc-3.5 build fix

+msi-stop-using-dev-bus-ops-directly-in-msic.patch +msi-msi-msi-x-api-updates.patch +rename-config_pci_use_vector-to-config_pci_msi.patch

MSI updates

+signal-race-fix-s390-fix.patch
+signal-race-fix-x86_64-fix.patch
+ppc-signal-handling-fixes.patch
+signal-race-fixes-sparc-sparc64.patch
+signal-race-fixes-ppc64.patch

Update various architectures for the signal handling race fix.

+i2o-resync-with-post-266-changes.patch
+i2o-resync-with-post-266-changes-2.patch

Forward-port the 2.6.6->current i2o changes into the i2o driver rewrite.

+make-shrinker_sem-an-rwsem.patch

Concurrent slab shrinking in the VM

+vlan-support-for-3c59x-3c90x.patch

Add vlan support to 3c59x.c

+add-support-for-innovision-dm-8401h.patch

More IDE chip support

+break-out-zone-free-list-initialization.patch

Split up some mm init code for future work

+fbcon-differentiate-bits_per_pixel-from-color-depth.patch +fbcon-differentiate-bits_per_pixel-from-color-depth-fixup.patch +fbcon-differentiate-bits_per_pixel-from-color-depth-export.patch +fbdev-set-color-fields-correctly.patch +fbdev-attn-maintainers-set-correct-hardware-capabilities.patch +rivafb-do-not-tap-vga-ports-if-not-x86.patch +i810fb-fixes.patch
+i810fb-fixes-2.patch

Framebuffer updates

+268-rc2-mm1-link-errors.patch

Fix bogus detection of undefined symbols

+drm-optimisation.patch

DRM cleanups/speedups

+maintainers-update.patch

macro has moved.

+fdomain-isa-fixup.patch

Fix the fdomain driver build

+net-smc9194c-fix-inline-compile-errors-fwd.patch +net-hamachic-remove-bogus-inline-at-function-prototype.patch +scsi-qla2xxx-fix-inline-compile-errors.patch +net-rrunnerc-fix-inline-compile-error.patch +istallion-remove-inlines.patch +mxserc-fix-inlines-fwd.patch +radio-maestroc-remove-an-inline-fwd.patch +netfilter-ip_nat_snmp_basicc-fix-inlines-fwd.patch +net-tulip-dmfec-fix-inline-compile-errors-fwd.patch +fix-inlining-errors-in-drivers-scsi-aic7xxx-aic79xx_osmc.patch +fix-inline-related-gcc-34-build-failures-in.patch

More attempts to recover from the gcc-3.4 disaster.

+modular-swim3.patch
+modular-anscd.patch

Fix a couple of drivers for modular builds

+jffs2_compression_options-fix.patch

jffs2 fix

+ppc8xx-maintainer-patch.patch

MAINTAINER update

+ext2_readdir-filp-f_pos-fix.patch

Fix f_pos handling in ext2_readdir()

+do_general_protection-doesnt-disable-irq.patch

Remvoe unneeded local IRQ enabling

+jbd-jh-unmapping-race-fix.patch

JBD race fix.

+nfs4-oops-fixes.patch

nfsv4 oops fixes

+proc_pid_cmdline-race-fix.patch

Fix race accessing /porc/pid/cmdline

+support-for-exar-xr17c158-octal-uart.patch

Serial driver support

+dvb-errno-removal.patch

Fix DVB build

+x86-64-merge-for-268rc2-mm1.patch

Big x86_64 udpate

+ia64-swiotlb-fixes.patch

Fix bugs in IA64 swiotlb code.

+documentation-fix-for-nmi-watchdog.patch

NMI documentation fix

+hpet-copyrights-cleanup.patch

Fix copyrights in HPET driver

+remove-outdated-reference-to-documentation-arm-sa1100-pcmcia-fwd.patch +canonically-reference-files-in-documentation-code-comments-part.patch

Fox references to Documentation files

+altix-system-controller-communication-driver.patch +snsc-build-fix.patch

SGI Altix system controller communication support

+move-duplicate-bug-and-warn_on-bits-to-asm-generic.patch

Consolidate some debug macros

+fix-con_buf_size-usage.patch

CON_BUF_SIZE fix

+vprintk-support.patch
+vprintk-for-ext2-errors.patch
+vprintk-for-ext3-errors.patch

Add vprintk(), use it in ext2 and ext3.

+remove-symbol_is.patch

Remove unused symbol_is()

+prio_tree-kill-vma_prio_tree_init.patch +prio_tree-iterator-vma_prio_tree_next-cleanup.patch

prio-tree cleanups

+rcu-cpu-offline-cleanup.patch
+rcu-rcu-cpu-offline-fix.patch
+rcu-low-latency-rcu.patch

RCU updates.

+alpha-print-the-symbol-of-pc-and-ra-during-oops.patch

Make alpha oopses more friendly.

+staircase-cpu-scheduler-268-rc2-mm1.patch

Staircase scheduler.

+first-next_cpu-returns-values-nr_cpus.patch
+first-next_cpu-returns-values-nr_cpus-fix.patch

Fix __first_cpu() and __next_cpu()

+add-support-for-it8212-ide-controllers.patch

More IDE device support

+drivers-net-wan-cycx_x25c189-warning-conflicting-types.patch

Warning fix

+watchdog-fix-warning-defined-but-not-used.patch

Wanring fix

+fix-pci-access-mode-dependences-in-arch-i386-kconfig.patch

Kconfig dependency fix

+drivers-block-ubc-6.patch
+ub-warning-fixes.patch

Add simple USB block driver. No documentation so you're on your own with this one.

+i386-hotplug-cpu.patch

Add i386 CPU hotplug support. No documentation so you're on your own with this one.

+token-based-thrashing-control.patch
+token-based-thrashing-control-remove-debug.patch

VM load control.

+writeback-page-range-hint.patch +fix-writeback-page-range-to-use-exact-limits.patch +mpage-writepages-range-limit-fix.patch +filemap_fdatawrite-range-interface.patch +concurrent-o_sync-write-support.patch

O_SYNC writeback speedups.

+nfsd-force-server-side-tcp-when-nfsv4-enabled.patch +nfsd-nfsd-is-missing-a-put_group_info-in-the-auth_null.patch +nfsd-make-cache_init-initialize-reference-count-to-1.patch +nfsd-simplify-auth_domain_lookup.patch +nfsd-fix-ip_map-cache-reference-count-leak.patch +nfsd-basic-v4-acl-definitions.patch +nfsd-posix-nfsv4-acl-translation-for-nfsd.patch +nfsd-acl-support-for-the-nfsv4-server.patch

kNFSD update

+bridge-build-fix.patch

Fix the build.

All 388 patches:

linus.patch

sched-use-for_each_cpu.patch
sched: use for_each_cpu

fix-bsd-accounting-cross-platform-compatibility.patch
Fix BSD accounting cross-platform compatibility

sysfs-backing-store-add-sysfs_dirent-to-sysfs-dentry.patch
sysfs backing store: add sysfs_dirent to sysfs dentry

sysfs-backing-store-use-sysfs_dirent-tree-for-readdir-etc.patch
sysfs backing store: use sysfs_dirent tree for ->readdir etc.

sysfs-backing-store-free-sysfs_dirent-on-file-removal.patch
sysfs backing store: free sysfs_dirent on file removal

sysfs-backing-store-change-sysfs_file_operations.patch
sysfs backing store: change sysfs_file_operations

sysfs-backing-store-stop-pinning-dentries-inodes-for-leaves.patch
sysfs backing store: stop pinning dentries & inodes for leaves

bk-acpi.patch

bk-alsa.patch

bk-dma-declare-coherent-memory.patch

bk-cpufreq.patch

bk-drm.patch

bk-ieee1394.patch

bk-input.patch

bk-libata.patch

bk-netdev.patch

bk-ntfs.patch

bk-pci.patch

bk-pnp.patch

bk-power.patch

bk-scsi.patch

bk-usb.patch

mm.patch
add -mmN to EXTRAVERSION

longhaul-fix.patch
longhaul build fix

bk-netdev-axnet_cs-fix.patch
bk-netdev-axnet_cs-fix

bk-netdev-hp-plus-fix.patch
bk-netdev-hp-plus-fix

bk-power-x86_64-fix.patch
bk-power x86_64 fixes

mm-swsusp-make-sure-we-do-not-return-to-userspace-where-image-is-on-disk.patch
-mm swsusp: make sure we do not return to userspace where image is on disk

mm-swsusp-copy_page-is-harmfull.patch
-mm swsusp: copy_page is harmfull

nmi-trigger-switch-support-for-debuggingupdated.patch
NMI trigger switch support for debugging(updated)

nmi-trigger-switch-support-for-debuggingupdated-fix.patch
nmi-trigger-switch-support-for-debuggingupdated-fix

make-i386-die-more-resilient-against-recursive-errors.patch
Make i386 die() more resilient against recursive errors

kgdb-ga.patch
kgdb stub for ia32 (George Anzinger's one)
kgdbL warning fix
kgdb buffer overflow fix
kgdbL warning fix
kgdb: CONFIG_DEBUG_INFO fix
x86_64 fixes
correct kgdb.txt Documentation link (against 2.6.1-rc1-mm2)
kgdb: fix for recent gcc
kgdb warning fixes
THREAD_SIZE fixes for kgdb
Fix stack overflow test for non-8k stacks kgdb-ga.patch fix for i386 single-step into sysenter fix TRAP_BAD_SYSCALL_EXITS on i386
add TRAP_BAD_SYSCALL_EXITS config for i386

kgdboe-netpoll.patch
kgdb-over-ethernet via netpoll
kgdboe: fix configuration of MAC address

kgdb-x86_64-support.patch
kgdb-x86_64-support.patch for 2.6.2-rc1-mm3
kgdb-x86_64-warning-fixes

kgdb-ia64-support.patch
IA64 kgdb support
ia64 kgdb repair and cleanup
ia64 kgdb fix

kgdb-ia64-fixes.patch
kgdb: ia64 fixes

make-tree_lock-an-rwlock.patch
make mapping->tree_lock an rwlock

radix_tree_tag_set-atomic.patch
Make radix_tree_tag_set/clear atomic wrt the tag

radix_tree_tag_set-only-needs-read_lock.patch
radix_tree_tag_set only needs read_lock()

must-fix.patch
must fix lists update
must fix list update
mustfix update

must-fix-update-5.patch
must-fix update

mustfix-lists.patch
mustfix lists

ppc64-__make_room-warning-fix.patch
ppc64: __make_room() warning fix

ppc64-fix-off-by-one-in-mem_init.patch
ppc64: fix off-by-one in mem_init()

ppc64-struct-pci_controller-cleanup.patch
ppc64: struct pci_controller cleanup

ppc64-isa-device-tree-node-refcount-fix.patch
ppc64: ISA device tree node refcount fix

ppc64-fix-ras-irq-handlers.patch
ppc64: fix RAS irq handlers

ppc64-fix-hotplug-irq-migration-code.patch
ppc64: fix hotplug irq migration code

ppc64-fix-cpu_up-race.patch
ppc64: Fix cpu_up race

ppc64-improve-slb-reload.patch
ppc64: improve SLB reload

ppc64-remove-include-processorh-from-div64s.patch
ppc64: remove #include processor.h from div64.S

ppc32-support-for-mpc8560-cpu-and-boards.patch
ppc32: Support for MPC8560 CPU and boards

ppc32-support-for-mpc8555-cpu-and-board.patch
ppc32: support for MPC8555 CPU and board

ppc64-reloc_hide.patch

invalidate_inodes-speedup.patch
invalidate_inodes speedup
more invalidate_inodes speedup fixes

dev-mem-restriction-patch.patch
/dev/mem restriction patch

get_user_pages-handle-VM_IO.patch
fix get_user_pages() against mappings of /dev/mem

fa311-mac-address-fix.patch
wrong mac address with netgear FA311 ethernet card

pid_max-fix.patch
Bug when setting pid_max > 32k

jbd-remove-livelock-avoidance.patch
JBD: remove livelock avoidance code in journal_dirty_data()

journal_add_journal_head-debug.patch
journal_add_journal_head-debug

list_del-debug.patch
list_del debug check

oops-dump-preceding-code.patch
i386 oops output: dump preceding code

lockmeter.patch
lockmeter
ia64 CONFIG_LOCKMETER fix

unplug-can-sleep.patch
unplug functions can sleep

firestream-warnings.patch
firestream warnings

ext3_rsv_cleanup.patch
ext3 block reservation patch set -- ext3 preallocation cleanup

ext3_rsv_base.patch
ext3 block reservation patch set -- ext3 block reservation
ext3 reservations: fix performance regression
ext3 block reservation patch set -- mount and ioctl feature ext3 block reservation patch set -- dynamically increase reservation window ext3 reservation ifdef cleanup patch
ext3 reservation max window size check patch
ext3 reservation file ioctl fix

ext3-reservation-default-on.patch
ext3 reservation: default to on

ext3-lazy-discard-reservation-window-patch.patch
ext3 lazy discard reservation window patch
ext3 discard reservation in last iput fix patch
Fix lazy reservation discard
ext3 reservations: bad_inode fix
ext3 reservation discard race fix

hugetlb_shm_group-sysctl-gid-0-fix.patch
hugetlb_shm_group sysctl-gid-0-fix

really-ptrace-single-step-2.patch
ptrace single-stepping fix

ipr-ppc64-depends.patch
Make ipr.c require ppc

disk-barrier-core.patch
disk barriers: core
disk-barrier-core-tweaks

disk-barrier-ide.patch
disk barriers: IDE
disk-barrier-ide-symbol-expoprt
disk-barrier ide warning fix

barrier-update.patch
barrier update

barrier-flushing-fix.patch
barrier flushing fix

disk-barrier-scsi.patch
disk barriers: scsi

disk-barrier-dm.patch
disk barriers: devicemapper

disk-barrier-md.patch
disk barriers: MD

reiserfs-v3-barrier-support.patch
reiserfs v3 barrier support
reiserfs-v3-barrier-support-tweak

sync_dirty_buffer-retval.patch
make sync_dirty_buffer() return something useful

ext3-barrier-support.patch
ext3 barrier support

jbd-barrier-fallback-on-failure.patch
jbd: barrier fallback on failure

ide-print-failed-opcode.patch
ide: print failed opcode on IO errors
From: Jens Axboe <[email protected]>
Subject: Re: ide errors in 7-rc1-mm1 and later

add-bh_eopnotsupp-for-testing.patch
add BH_Eopnotsupp for testing async barrier failures

handle-async-barrier-failures.patch
Handle async barrier failures

tty_io-hangup-locking.patch
tty_io.c hangup locking

perfctr-core.patch
From: Mikael Pettersson <[email protected]>
Subject: [PATCH][1/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: core CONFIG_PERFCTR=n build fix
From: Mikael Pettersson <[email protected]>
Subject: [PATCH][6/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: misc

perfctr-i386.patch
From: Mikael Pettersson <[email protected]>
Subject: [PATCH][2/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: i386 perfctr #if/#ifdef cleanup
perfctr Dothan support
perfctr x86_tests build fix

perfctr-x86-init-bug.patch
perfctr x86 init bug

perfctr-k8-fix-for-internal-benchmarking-code.patch
perfctr: K8 fix for internal benchmarking code

perfctr-x86_64.patch
From: Mikael Pettersson <[email protected]>
Subject: [PATCH][3/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: x86_64

perfctr-ppc.patch
From: Mikael Pettersson <[email protected]>
Subject: [PATCH][4/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: PowerPC perfctr ppc32 update
perfctr update 4/6: PPC32 cleanups

perfctr-ppc32-buglet-fix.patch
perfctr ppc32 buglet fix

perfctr-virtualised-counters.patch
From: Mikael Pettersson <[email protected]>
Subject: [PATCH][5/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: virtualised counters perfctr update 6/6: misc minor cleanups
perfctr update 3/6: __user annotations perfctr-cpus_complement-fix
perfctr cpumask cleanup

perfctr-ifdef-cleanup.patch
perfctr ifdef cleanup

perfctr-update-2-6-kconfig-related-updates.patch
perfctr update 2/6: Kconfig-related updates

perfctr-update-5-6-reduce-stack-usage.patch
perfctr update 5/6: reduce stack usage

perfctr-low-level-documentation.patch
perfctr low-level documentation

perfctr-documentation-update.patch
perfctr documentation update

perfctr-inheritance-1-3-driver-updates.patch
perfctr inheritance 1/3: driver updates

perfctr-inheritance-illegal-sleep-bug.patch
perfctr inheritance illegal sleep bug

perfctr-inheritance-2-3-kernel-updates.patch
perfctr inheritance 2/3: kernel updates

perfctr-inheritance-3-3-documentation-updates.patch
perfctr inheritance 3/3: documentation updates

ext3-online-resize-patch.patch
ext3: online resizing

ext3-online-resize-warning-fix.patch
ext3-online-resize-warning-fix

sched-clean-init-idle.patch
sched: cleanup init_idle()

sched-clean-fork.patch
sched: cleanup, improve sched <=> fork APIs

sched-clean-fork-rename-wake_up_new_process-wake_up_new_task.patch
sched: rename wake_up_new_process -> wake_up_new_task

kernelthread-idle-fix-2.patch
kernel thread idle fix

sched-misc-cleanups-2.patch
sched: misc cleanups #2

sched-unlikely-rt_task.patch
sched: make rt_task unlikely

sched-misc.patch
sched: sched misc changes

sched-misc-fix-rt.patch
sched: fix RT scheduling & interactivity estimator

sched-no-balance-clone.patch
sched: disable balance on clone

sched-remove-balance-clone.patch
sched: remove balance on clone

sched-fork-hotplug-cleanuppatch.patch
sched: fork hotplug hanling cleanup

sched-consolidate-sched-domains.patch
sched: consolidate sched domains

sched-consolidate-domains-fix.patch
sched: fix for sched-consolidate-domains

sched-consolidate-domains-fix-2.patch
another sched consolidate domains fix

sched-domain-node-span-4.patch
sched: limit cpuspan of node scheduler domains

sched-merge-fix.patch
sched: merge fix

sched-domain-node-span-4-warning-fix.patch
sched-domain-node-span-4-warning-fix

sched-isolated-sched-domains.patch
sched: isolated sched domains

sched-isolated-sched-domains-fix.patch
sched-isolated-sched-domains-fix

create-cpu_sibling_map-for-ppc64.patch
Create cpu_sibling_map for PPC64

create-cpu_sibling_map-for-ppc64-fix.patch
create-cpu_sibling_map-for-ppc64-fix

sched-adjust-p4-per-cpu-gain.patch
sched: adjust p4 per-cpu gain

memory-backed-inodes-fix.patch
memory-backed inodes fix

ext3_bread-cleanup.patch
ext3_bread() cleanup

flexible-mmap-2.6.7-mm3-A8.patch
i386 virtual memory layout rework

flexible-mmap-bug-fix.patch
flexible-mmap BUG fix

flexible-mmap-updatepatch-267-mm5.patch
flexible-mmap update

sysctl-tunable-for-flexmmap.patch
sysctl tunable for flexmmap

legacy_va_layout-docs.patch
legacy_va_layout docs

driver-model-and-sysfs-support-for-pcmcia-1-3.patch
driver model and sysfs support for PCMCIA (1/3)

driver-model-and-sysfs-support-for-pcmcia-update.patch
driver model and sysfs support for PCMCIA update

update-drivers-net-pcmcia-2-3.patch
update drivers/net/pcmcia (2/3)

update-drivers-net-wireless-3-3.patch
update drivers/net/wireless (3/3)

posix-locking-fix-to-posix_same_owner.patch
posix locking: Minimal fix to posix_same_owner()

posix-locking-fix-to-locking-code.patch
posix locking: more locking code fixes

posix-locking-fix-up-nfs4statec.patch
posix locking: Fix up nfs4state.c

posix-locking-fix-up-lockd.patch
posix locking: Fix up lockd to make use of the new interface

posix-locking-fl_owner_t-to-pid-mapping.patch
posix locking: mapping between fl_owner_t and client-side "pid"

dvdrw-support-for-267-bk13.patch
DVD+RW support for 2.6.7-bk13

cdrw-packet-writing-support-for-267-bk13.patch
CDRW packet writing support

packet-remove-warning.patch
packet: remove #warning

packet-door-unlock.patch
packet writing: door unlocking fix

pkt_lock_door-warning-fix.patch
pkt_lock_door() warning fix

dvd-rw-packet-writing-update.patch
Packet writing support for DVD-RW and DVD+RW discs.

fix-race-in-pktcdvd-kernel-thread-handling.patch
Fix race in pktcdvd kernel thread handling

fix-open-close-races-in-pktcdvd.patch
Fix open/close races in pktcdvd

packet-writing-review-fixups.patch
packet writing: review fixups

remove-pkt_dev-from-struct-pktcdvd_device.patch
Remove pkt_dev from struct pktcdvd_device

packet-writing-docco.patch
packet writing documentation

trivial-cdrw-packet-writing-doc-update.patch
Trivial CDRW packet writing doc update

convert-packet-writing-to-seq_file.patch
packet writing: convert to seq_file

control-pktcdvd-with-an-auxiliary-character-device.patch
Control pktcdvd with an auxiliary character device

control-pktcdvd-with-an-auxiliary-character-device-fix.patch
control-pktcdvd-with-an-auxiliary-character-device-fix

simplified-request-size-handling-in-cdrw-packet-writing.patch
Simplified request size handling in CDRW packet writing

fix-setting-of-maximum-read-speed-in-cdrw-packet-writing.patch
Fix setting of maximum read speed in CDRW packet writing

r8169_napi-help-text-2.patch
R8169_NAPI help text

no-sysgood-for-ptrace-singlestep.patch
Don't use SYSGOOD for ptrace singlestep

err2-6-hashbin_remove_this-locking-fix.patch
err2-6: hashbin_remove_this() locking fix

dm-use-idr.patch
devicemapper: use an IDR tree for tracking minors

ipc-1-3-add-refcount-to-ipc_rcu_alloc.patch
ipc: Add refcount to ipc_rcu_alloc

ipc-2-3-remove-sem_revalidate.patch
ipc: remove sem_revalidate

ipc-3-3-enforce-semvmx-limit-for-undo.patch
ipc: enforce SEMVMX limit for undo

cleanup-of-ipc-msgc.patch
cleanup of ipc/msg.c

sk98lin-procfs-fix.patch
sk98lin procfs fix

cpufreq-driver-for-nforce2-kernel-267.patch
cpufreq driver for nForce2

allow-modular-ide-pnp.patch
allow modular ide-pnp

uml-base-patch.patch
uml: Uml base patch

rename-uml-console-device.patch
uml: rename console_device

uml-readds-just-for-now-ghashh-for-uml.patch
uml: Readds (just for now) ghash.h for UML

uml-avoid-that-gcc-breaks-uml-with-unit-at-a-time-compilation-mode.patch
uml: Avoid that gcc breaks UML with "unit at a time" compilation mode.

uml-fixes-an-host-fd-leak-caused-by-hostfs.patch
uml: Fixes an host fd leak caused by hostfs.

uml-adds-legacy_pty-config-option.patch
uml: Adds LEGACY_PTY config option

uml-makes-make-help-arch=um-work.patch
uml: Makes "make help ARCH=um" work.

uml-fixes-fixdepc-to-support-arch-um-include-uml-configh.patch
uml: Fixes "fixdep.c" to support arch/um/include/uml-config.h.

uml-kill-useless-warnings.patch
uml: Kill useless warnings

uml-avoids-compile-failure-when-host-misses-tkill.patch
uml: Avoids compile failure when host misses tkill().

uml-reduces-code-in-_user-files-by-moving-it-in-_kern-files-if-already-possible.patch
uml: Reduces code in *_user files, by moving it in _kern files if already possible.

uml-fixes-raw-and-uses-it-in-check_one_sigio-also-fixes-a-silly-panic-eintr-returned-by-call.patch
uml: Fixes raw() and uses it in check_one_sigio; also fixes a silly panic (EINTR returned by call).

uml-folds-hostaudio_userc-into-hostaudio_kernc.patch
uml: Folds hostaudio_user.c into hostaudio_kern.c.

uml-use-ptrace_scemu-the-so-called-sysemu-to-reduce-syscall-cost.patch
uml: Use PTRACE_SCEMU (the so-called SYSEMU) to reduce syscall cost.

uml-adds-the-nosysemu-command-line-parameter-to-disable-sysemu.patch
uml: Adds the "nosysemu" command line parameter to disable SYSEMU

uml-adds-proc-sysemu-to-toggle-sysemu-usage.patch
uml: Adds /proc/sysemu to toggle SYSEMU usage.

uml-fix-for-sysemu-patches.patch
uml: Fix for sysemu patches

uml-handles-correctly-errno-==-eintr-in-lots-of-places.patch
uml: Handles correctly errno == EINTR in lots of places.

uml-adds-some-exports.patch
uml: Adds some exports

uml-avoids-a-panic-for-a-legal-situation.patch
uml: Avoids a panic for a legal situation

uml-removes-dead-code-in-trap_kernc.patch
uml: Removes dead code in trap_kern.c

uml-make-malloc-call-vmalloc-if-needed-needed-for-hostfs-on-26-host.patch
uml: Make malloc() call vmalloc if needed. Needed for hostfs on 2.6 host.

uml-little-kmalloc.patch
uml: little-kmalloc

uml-fix-os_process_pc-and-os_process_parent-for-corner-cases.patch
uml: Fix os_process_pc and os_process_parent for corner cases.

uml-remove-a-group-of-unused-bh-functions.patch
uml: remove a group of unused bh functions

fix-warnings-in-net-irda.patch
sparse: fix warnings in net/irda/*

i810_audio-fix-the-error-path-of-resource-management.patch
i810_audio: Fix the error path of resource management

fix-drivers-isdn-hisax-avm_pcic-build-warning-when.patch
Fix drivers/isdn/hisax/avm_pci.c build warning when !CONFIG_ISAPNP

idr-stale-comment.patch
idr.c: remove stale comment

bio_copy_user-cleanups.patch
bio_copy_user() cleanups

idr-comments-updates.patch
idr comments updates

schedule-profiling.patch
schedule() profiling
From: Arjan van de Ven <[email protected]>
Subject: Re: schedule profileing

add-a-few-might_sleep-checks.patch
Add a few might_sleep() checks

add-a-few-might_sleep-checks-fix.patch
add-a-few-might_sleep-checks fix

release_task-may-sleep.patch
permit sleeping in release_task()

crc16-renaming-in-via-velocity-ethernet-driver.patch
CRC16 renaming in VIA Velocity ethernet driver

per_cpu-per_cpu-cpu_gdt_table.patch
percpu: cpu_gdt_table

per_cpu-per_cpu-cpu_gdt_table-fix.patch
per_cpu-per_cpu-cpu_gdt_table-fix

per_cpu-per_cpu-init_tss.patch
percpu: init_tss

per_cpu-per_cpu-cpu_tlbstate.patch
percpu: cpu_tlbstate

gcc35-alps_tdlb7.c.patch
gcc-3.5 fixes

gcc35-always-inline.patch
gcc-3.5 fixes

gcc35-auerswald.c.patch
gcc-3.5 fixes

gcc35-dabusb.c.patch
gcc-3.5 fixes

gcc35-ds.c.patch
gcc-3.5 fixes

gcc35-fixmap.h.patch
gcc-3.5 fixes

gcc35-mtrr.h.patch
gcc-3.5 fixes

gcc35-sonypi.patch
gcc-3.5 fixes

gcc35-sp887x.c.patch
gcc-3.5 fixes

gcc35-tda1004x.c.patch
gcc-3.5 fixes

gcc35-transport.h.patch
gcc-3.5 fixes

gcc35-ufs_fs.h.patch
gcc-3.5 fixes

gcc35-videodev.c.patch
gcc-3.5 fixes

gcc35-wavefront_fx.c.patch
gcc-3.5 fixes

dev-zero-vs-hugetlb-mappings.patch
/dev/zero vs hugetlb mappings.

hugetlbfs-private-mappings.patch
hugetlbfs private mappings

net-kconfig-crc16-fix.patch
net/Kconfig crc16 warning fix

preset-loops_per_jiffy-for-faster-booting.patch
preset loops_per_jiffy for faster booting

define-inline-as-__attribute__always_inline-also-for-gcc-=-34.patch
#define inline as __attribute__((always_inline)) also for gcc >= 3.4

gcc-34-and-broken-inlining.patch
clean up __always_inline__ usage

handle-undefined-symbols.patch
Fail if vmlinux contains undefined symbols

268-rc2-mm1-link-errors.patch
put irq stacks back into bss

split-generic_file_aio_write-into-buffered-and-direct-i-o-parts.patch
split generic_file_aio_write into buffered and direct I/O parts

radeonfb-cleanup-and-little-fixes.patch
radeonfb: cleanup and little fixes

making-i-dhash_entries-cmdline-work-as-it-use-to.patch
Make i/dhash_entries cmdline work as it use to.

making-i-dhash_entries-cmdline-work-as-it-use-to-fix.patch
making-i-dhash_entries-cmdline-work-as-it-use-to-fix

rivafb-i2c-fixes.patch
Rivafb I2C fixes

jbd-recovery-latency-fix.patch
jbd recovery latency fix

truncate_inode_pages-latency-fix.patch
truncate_inode_pages-latency-fix

journal_clean_checkpoint_list-latency-fix.patch
journal_clean_checkpoint_list latency fix

journal_clean_checkpoint_list-latency-fix-fix.patch
journal_clean_checkpoint_list-latency-fix-fix

kjournald-smp-latency-fix.patch
kjournald-smp-latency-fix

unmap_vmas-smp-latency-fix.patch
unmap_vmas-smp-latency-fix

__cleanup_transaction-latency-fix.patch
__cleanup_transaction-latency-fix

prune_dcache-latency-fix.patch
prune_dcache-latency-fix

filemap_sync-latency-fix.patch
filemap_sync-latency-fix

slab-latency-fix.patch
slab-latency-fix

get_user_pages-latency-fix.patch
get_user_pages-latency-fix

oom-show_free_areas.patch
oom-killer: call show_free_areas

send_IPI_mask_bitmask-build-fix.patch
send_IPI_mask_bitmask() build fix

e1000-build-fix.patch
e1000 build fix

e1000-inlining-fix.patch
e1000 inlining fix

pty_write-latency-fix.patch
pty_write-latency-fix

enable-all-events-for-initramfs.patch
Enable all events for initramfs

arch-i386-kernel-smpc-gcc341-inlining-fix.patch
arch/i386/kernel/smp.c gcc341 inlining fix

fix-menuconfig-partial-inability-to-show-help-texts.patch
Fix menuconfig partial inability to show help texts.

was-removal-of-sync-in-panic.patch
remove sync() from panic

move-cache_reap-out-of-timer-context.patch
Move cache_reap out of timer context

move-cache_reap-out-of-timer-context-fix.patch
move-cache_reap-out-of-timer-context-fix

gettimeofday-nanoseconds-patch-makes-it-possible-for-the-posix-timer.patch
gettimeofday nanoseconds patch

quiet-down-per-zone-memory-stats.patch
quieten down per-zone memory stats

x86-64-singlestep-through-sigreturn-system-call-2.patch
Fix x86-64 singlestep through sigreturn system call

create-nodemask_t.patch
Create nodemask_t

fat-kill-nls-default.patch
FAT: kill nls default

add-ixdp2x01-board-support-to-cs89x0-driver.patch
Add IXDP2x01 board support to CS89x0 driver

msi-stop-using-dev-bus-ops-directly-in-msic.patch
MSI: stop using dev->bus->ops directly in msi.c

msi-msi-msi-x-api-updates.patch
MSI: MSI/MSI-X API updates

rename-config_pci_use_vector-to-config_pci_msi.patch
rename CONFIG_PCI_USE_VECTOR to CONFIG_PCI_MSI

remove-dead-prototypes.patch
remove dead prototypes

s390-use-include-asm-generic-dma-mapping-brokenh.patch
s390: Use include/asm-generic/dma-mapping-broken.h

cdrom-get_last_written-fix.patch
Subject: cdrom.c get_last_written fixup

intel8x0c-to-include-ck804-audio-support.patch
intel8x0.c to include CK804 audio support

get_random_bytes-returns-the-same-on-every-boot.patch
get_random_bytes() returns the same on every boot

locking-optimization-for-cache_reap.patch
slab: locking optimization for cache_reap

b44-add-47xx-support.patch
b44: add 47xx support

fbmon-edd-blacklist.patch
fbcom: EDD-based blacklisting

signal-race-fix.patch
signal handling race fix

signal-race-fix-ia64.patch
signal-race-fix: ia64

signal-race-fix-s390.patch
signal-race fixes for s390

signal-race-fix-s390-fix.patch
s390 signal handling fixes

signal-race-fix-x86_64.patch
signal-race-fixes: x86-64 support

signal-race-fix-x86_64-fix.patch
x86_64 signal handling fix

ppc-signal-handling-fixes.patch
ppc signal handling fixes

signal-race-fixes-sparc-sparc64.patch
signal handling race fixes: sparc and sparc64

signal-race-fixes-ppc64.patch
pPC64 signal race fix patch

process-aggregates.patch
Process Aggregates (PAGG)

process-aggregates-warning-fix.patch
process-aggregates warning fix

d_unhash-consolidation.patch
d_unhash consolidation

allow-x86_64-to-reenable-interrupts-on-contention.patch
Allow x86_64 to reenable interrupts on contention

move-pit-code-to-timer_pit.patch
x86: move PIT code to timer_pit

move-pit-code-to-timer_pit-warning-fix.patch
move-pit-code-to-timer_pit-warning-fix

i2o-build_99.patch
i20 rewrite

i2o-build_99-gcc295-fixes.patch
i2o-build_99-gcc295-fixes

i2o-resync-with-post-266-changes.patch
i2o: resync with post-2.6.6 changes

i2o-resync-with-post-266-changes-2.patch
i2o: more resyncing with post-2.6.6 changes

activate-smbus-device-on-hp-d300l.patch
activate SMBus device on hp d300l

apic-output-reduction.patch
IO-APIC debug message reduction

fix-ide-probe-double-detection.patch
Fix ide probe double detection

fix-smm-failures-on-e750x-systems.patch
fix SMM failures on E750x systems

serial-cs-and-unusable-port-size-ranges.patch
serial-cs and unusable port size ranges

make-shrinker_sem-an-rwsem.patch
make shrinker_sem an rwsem

vlan-support-for-3c59x-3c90x.patch
VLAN support for 3c59x/3c90x

add-support-for-innovision-dm-8401h.patch
Add support for Innovision DM-8401H

break-out-zone-free-list-initialization.patch
break out zone free list initialization

fbcon-differentiate-bits_per_pixel-from-color-depth.patch
fbcon: ifferentiate bits_per_pixel from color depth

fbcon-differentiate-bits_per_pixel-from-color-depth-fixup.patch
fbcon-differentiate-bits_per_pixel-from-color-depth-fixup

fbcon-differentiate-bits_per_pixel-from-color-depth-export.patch
fbcon-differentiate-bits_per_pixel-from-color-depth-export

fbdev-set-color-fields-correctly.patch
fbdev: set color fields correctly

fbdev-attn-maintainers-set-correct-hardware-capabilities.patch
fbdev: ATTN: Maintainers - Set correct hardware capabilities

rivafb-do-not-tap-vga-ports-if-not-x86.patch
rivafb: Do not tap VGA ports if not X86

i810fb-fixes.patch
i810fb fixes

i810fb-fixes-2.patch
i810fb fixes #2

drm-optimisation.patch
drm optimisation

maintainers-update.patch
MAINTAINERS update

fdomain-isa-fixup.patch
fdomain_cs ISA fix

net-smc9194c-fix-inline-compile-errors-fwd.patch
net/smc9194.c: fix gcc-3.5 inline compile errors

net-hamachic-remove-bogus-inline-at-function-prototype.patch
net/hamachi.c: gcc-3.5 build fixes

scsi-qla2xxx-fix-inline-compile-errors.patch
qla2xxx gcc-3.5 fixes

net-rrunnerc-fix-inline-compile-error.patch
net/rrunner.c: gcc-3.5 fixes

istallion-remove-inlines.patch
istallion: gcc-3.5 fixes

mxserc-fix-inlines-fwd.patch
mxser.c: gcc-3.5 fixes

radio-maestroc-remove-an-inline-fwd.patch
radio-maestro.c: gcc-3.5 fixes

modular-swim3.patch
modular swim3

modular-anscd.patch
Fix modular anscd

jffs2_compression_options-fix.patch
JFFS2_COMPRESSION_OPTIONS dependency fix

ppc8xx-maintainer-patch.patch
PPC8xx Maintainer patch

ext2_readdir-filp-f_pos-fix.patch
ext2_readdir() filp->f_pos fix

netfilter-ip_nat_snmp_basicc-fix-inlines-fwd.patch
netfilter/ip_nat_snmp_basic.c: gcc-3.5 fixes

net-tulip-dmfec-fix-inline-compile-errors-fwd.patch
net/tulip/dmfe.c: gcc-3.5 fixes

do_general_protection-doesnt-disable-irq.patch
do_general_protection doesn't disable irq

jbd-jh-unmapping-race-fix.patch
jbd-jh-unmapping-race-fix

nfs4-oops-fixes.patch
nsf4 oops fixes

proc_pid_cmdline-race-fix.patch
proc_pid_cmdline() race fix

support-for-exar-xr17c158-octal-uart.patch
Support for Exar XR17C158 Octal UART

dvb-errno-removal.patch
DVB: "errno" undefined

x86-64-merge-for-268rc2-mm1.patch
x86-64 merge for 2.6.8rc2-mm1

ia64-swiotlb-fixes.patch
ia64: Various swiotlb fixes

documentation-fix-for-nmi-watchdog.patch
Documentation fix for NMI watchdog

hpet-copyrights-cleanup.patch
HPET copyrights, cleanup

remove-outdated-reference-to-documentation-arm-sa1100-pcmcia-fwd.patch
remove outdated reference to Documentation/arm/SA1100/PCMCIA

canonically-reference-files-in-documentation-code-comments-part.patch
Canonically reference files in Documentation/ code comments part

altix-system-controller-communication-driver.patch
Altix system controller communication driver

snsc-build-fix.patch
snsc-build-fix

move-duplicate-bug-and-warn_on-bits-to-asm-generic.patch
move duplicate BUG and WARN_ON bits to asm-generic

fix-con_buf_size-usage.patch
Fix CON_BUF_SIZE usage

vprintk-support.patch
vprintk support

vprintk-for-ext2-errors.patch
vprintk for ext2 errors

vprintk-for-ext3-errors.patch
vprintk for ext3 errors

remove-symbol_is.patch
Remove symbol_is()

prio_tree-kill-vma_prio_tree_init.patch
prio_tree: kill vma_prio_tree_init()

prio_tree-iterator-vma_prio_tree_next-cleanup.patch
prio_tree: iterator + vma_prio_tree_next cleanup

rcu-cpu-offline-cleanup.patch
RCU - cpu-offline-cleanup

rcu-rcu-cpu-offline-fix.patch
RCU - cpu offline fix

rcu-low-latency-rcu.patch
RCU: low latency rcu

alpha-print-the-symbol-of-pc-and-ra-during-oops.patch
alpha: print the symbol of pc and ra during Oops

staircase-cpu-scheduler-268-rc2-mm1.patch
Staircase cpu scheduler

first-next_cpu-returns-values-nr_cpus.patch
first/next_cpu returns values > NR_CPUS

first-next_cpu-returns-values-nr_cpus-fix.patch
first-next_cpu-returns-values-nr_cpus fix

add-support-for-it8212-ide-controllers.patch
Add support for IT8212 IDE controllers

drivers-net-wan-cycx_x25c189-warning-conflicting-types.patch
drivers/net/wan/cycx_x25.c:189: warning: conflicting types for built-in function 'log2'

watchdog-fix-warning-defined-but-not-used.patch
watchdog: fix warning "defined but not used"

fix-pci-access-mode-dependences-in-arch-i386-kconfig.patch
fix PCI access mode dependences in arch/i386/Kconfig

drivers-block-ubc-6.patch
drivers/block/ub.c #6

ub-warning-fixes.patch
ub warning fixes

i386-hotplug-cpu.patch
i386 Hotplug CPU

token-based-thrashing-control.patch
token based thrashing control

token-based-thrashing-control-remove-debug.patch
token-based-thrashing-control-remove-debug

writeback-page-range-hint.patch
Writeback page range hint

fix-writeback-page-range-to-use-exact-limits.patch
Fix writeback page range to use exact limits

mpage-writepages-range-limit-fix.patch
mpage writepages range limit fix

filemap_fdatawrite-range-interface.patch
filemap_fdatawrite range interface

concurrent-o_sync-write-support.patch
Concurrent O_SYNC write support

fix-inlining-errors-in-drivers-scsi-aic7xxx-aic79xx_osmc.patch
inlining errors in drivers/scsi/aic7xxx/aic79xx_osm.c

fix-inline-related-gcc-34-build-failures-in.patch
fix inline related gcc 3.4 build failures in drivers/net/wan/dscc4.c

nfsd-force-server-side-tcp-when-nfsv4-enabled.patch
nfsd: force server-side TCP when NFSv4 enabled

nfsd-nfsd-is-missing-a-put_group_info-in-the-auth_null.patch
nfsd: nfsd is missing a put_group_info in the auth_null

nfsd-make-cache_init-initialize-reference-count-to-1.patch
nfsd: make cache_init initialize reference count to 1

nfsd-simplify-auth_domain_lookup.patch
nfsd: simplify auth_domain_lookup

nfsd-fix-ip_map-cache-reference-count-leak.patch
nfsd: fix ip_map cache reference count leak.

nfsd-basic-v4-acl-definitions.patch
nfsd: basic v4 ACL definitions

nfsd-posix-nfsv4-acl-translation-for-nfsd.patch
nfsd: POSIX<->NFSv4 acl translation for nfsd

nfsd-acl-support-for-the-nfsv4-server.patch
nfsd: ACL support for the NFSv4 server

bridge-build-fix.patch
bridge build fix

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Andrew Morton wrote:

| - Added Con's staircase CPU scheduler.
|
| This will probably have to come out again because various people
| are still fiddling with the CPU scheduler.  But my feeling here is
| that the current 1st-gen CPU scheduler has been tweaked as far as
| it can go and is still not 100% right.  It is time to start
| thinking about a new design which addresses the requirements and
| current problems by algorithmic means rather than by tweaking.
| Removing over 300 lines from the scheduler is a good sign.
|
| Feedback on this patch is sought.
|

I'm glad you added staircase, I've had better experiences with staircase than the one which was mainstream before, I don't have any actual timings on it, but it felt more responsive under heavier load(Compiling much, listening to music, browsing...). :)

- --
Espen Fjellvær Olsen
[email protected]
Norway
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFBDggWibTL5aHQf7URAmwvAJ46i+5OpkIQp4BtYt2xQScje5hmbgCfXjeF a9Q46GSRh9YWtp2lfVay1IY=
=PlKC
-----END PGP SIGNATURE-----

I would really appreciate any testing results on this, both good and bad. I want to get this thing tuned and into a generally good shape for use by everybody upstream.

I'm especially interested in how this affects compute servers, desktops and heavily overloaded network servers (the "spamassassin slowed my system to a crawl" symptom would be one to test ;)).

I suspect the patch may need some tweaking to help interactivity in some cases, but maybe it'll already work magically by itself...

"Debugging is twice as hard as writing the code in the first place.
Therefore, if you write the code as cleverly as possible, you are,
by definition, not smart enough to debug it." - Brian W. Kernighan

Hi,

To evaluate your patch, I tested -mm kernels for thrashing generated by our benchmark suit.

In 2.6.8-rc2-mm2, performance of application increased, and overhead of kernel decreased.

** Overview of workload

Benchmark program creates disk I/O processes and shared memory access processes. Generating disk I/O and shared memory access at the same time.

** Detailed environment of performance evaluation

- Hardware
CPU: Xeon 1.6GHz * 4
Memory: 2GB
HDD: IDE ATA100

- The benchmark suit
The benchmark suit is the wblg-disk, which I have released on SourceForge.

<http://sourceforge.net/project/showfiles.php?group_id=110454&package_id=119281>
# I used alpha version (1.0.3-alpha) in this test. # I will release 1.0.3 soon.

- configuration of benchmark
1. disk IO workload
+ number of process: 4 processes
+ read/write ratio: read 0% / write 100%
+ file IO size: 1KB - 256KB (random)

2. memory access workload
+ number of process: 32 processes
+ Shard memory regions: 512MB * 4
+ Each process accesses one shared memory region. (8 processes share one shared memory region.)
+ Each process repeats 4 byte memory access each 4KB.

Measurement time: 1 hour
Measurement items: write throughput

- Other configurations
Using Oprofile
Issue vmstat command each 1 minute

** Results of performance evaluation

* result of benchmark

                       write throughput [MB/s]
       2.6.8-rc2-mm1:  2.39
       2.6.8-rc2-mm2:  2.68

* result of vmstat

                       swap in(kB/s)   swap out(kB/s)
       2.6.8-rc2-mm1:  0 - 641         0 - 583         
       2.6.8-rc2-mm2:  0 - 727         0 - 684         

* results of Oprofile

- System profiling (top 2)

Overhead of kernel decreased by 3.9%.

2.6.8-rc2-mm1:

       No.     samples         %               
       1.      170981153       77.6102 wblg-disk_client
       2.       46808551       21.2469 vmlinux-2.6.8-rc2-mm1

2.6.8-rc2-mm2:

       No.     samples         %               
       1.      179798682       81.6102 wblg-disk_client
       2.       38141112       17.3122 vmlinux-2.6.8-rc2-mm2

- Kernel profiling (top 10)

Ratio of page_referenced_one() and kmap_atomic() decreased.

2.6.8-rc2-mm1:

       No.     samples         %       symbol name
       1       11398599        24.3515 page_referenced_one
       2        5652276        12.0753 kmap_atomic
       3        2257662         4.8232 sysenter_past_esp
       4        2098275         4.4827 flush_tlb_others
       5        1467288         3.1347 __copy_to_user_ll
       6        1167740         2.4947 page_address
       7        1145108         2.4464 page_fault
       8         946909         2.0229 flush_tlb_page
       9         889151         1.8995 do_gettimeofday
       10        828174         1.7693 refill_inactive_zone

2.6.8-rc2-mm2:

       No.     samples         %       symbol name
       1        6057840        15.8827 page_referenced_one
       2        3707571         9.7207 kmap_atomic
       3        2531840         6.6381 sysenter_past_esp
       4        1707017         4.4755 __copy_to_user_ll
       5        1328610         3.4834 flush_tlb_others
       6        1233726         3.2346 page_fault
       7        1140917         2.9913 do_gettimeofday
       8         970534         2.5446 get_offset_tsc
       9         759579         1.9915 mark_offset_tsc
       10        650208         1.7047 page_address

Best regards,
Hideo AOKI

Systems Development Laboratory, Hitachi, Ltd.

I also tested --mm kernels for no thrashing situation by our benchmark suit.

In 2.6.8-rc2-mm2, overhead of page_refernced_one() decreases in shared memory access. Additionally, it seems that token based thrashing control patch has not bad effect in no thrashing situation.

** Overview of workload

Benchmark program creates workload processes that alternate disk IO with shared memory access.

** Detailed environment of performance evaluation

- Hardware
CPU: Xeon 1.6GHz * 4
Memory: 4GB
HDD: IDE ATA100

- The benchmark suit
The benchmark suit is the wblg-disk 1.0.2, which I have released on SourceForge. You can get from following URL.

<http://sourceforge.net/project/showfiles.php?group_id=110454&package_id=119281>.

- Configuration of benchmark suit
+ number of workload process: 640 processes
+ read/write ratio: read 0% / write 100%
+ file IO size: 1KB - 256KB (random)

+ Shard memory regions: 1.6GB * 1
All workload processes share one shared memory region.
+ Each process repeats 4 byte memory access each 4KB.

Measurement time: 3 hour
Measurement items: write throughput

- Other configurations
Using Oprofile
Issue vmstat command each 1 minute

** Results of performance evaluation

* result of benchmark

                       write throughput [MB/s]
       2.6.8-rc2-mm1:  2.08
       2.6.8-rc2-mm2:  2.10

* result of vmstat

                       swap in (min-max)(kB/s) swap out (min-max)(kB/s)
       2.6.8-rc2-mm1:  0 - 9                   0 - 9         
       2.6.8-rc2-mm2:  0 - 1                   0 - 1         

* Results of Oprofile

- system profiling (top 2)

2.6.8-rc2-mm1:

       No.     samples         %               
       1       252096016       81.1833 wblg-disk_client
       2        55708450       17.94   vmlinux-2.6.8-rc2-mm1

2.6.8-rc2-mm2:

       No.     samples         %
       1       180452715       84.9684 wblg-disk_client
       2        29715808       13.9921 vmlinux-2.6.8-rc2-mm2

- kernel profiling (top 10)

Ratio of page_referenced_one() and kmap_atomic() decreased. Ratio of copy_page_range(), page_fault(), and refill_inactive_zone() increased.

2.6.8-rc2-mm1:

       No.     samples         %       symbol name
       1       24952210        44.7907 page_referenced_one
       2        6924133        12.4292 kmap_atomic
       3        2751806         4.9397 flush_tlb_page
       4        1466868         2.6331 copy_page_range
       5        1362218         2.4453 try_atomic_semop
       6        1042919         1.8721 mark_offset_tsc
       7         820792         1.4734 page_fault
       8         633105         1.1365 vma_prio_tree_next
       9         586925         1.0536 update_queue
       10        576520         1.0349 __copy_from_user_ll

2.6.8-rc2-mm2:

       No.     samples         %       symbol name
       1       10778546        36.2721 page_referenced_one
       2        2821678         9.4955 kmap_atomic
       3        1526580         5.1373 copy_page_range
       4        1400807         4.714  flush_tlb_page
       5         753029         2.5341 mark_offset_tsc
       6         724207         2.4371 page_fault
       7         461152         1.5519 refill_inactive_zone
       8         436286         1.4682 __copy_from_user_ll
       9         395080         1.3295 ext3_find_entry
       10        341127         1.148  apic_timer_interrupt

Best regards,
Hideo AOKI

Systems Development Laboratory, Hitachi, Ltd.

Anyone with feedback on this please cc me. This was developed separately from the -mm series which has heaps of other scheduler patches which were not trivial to merge with so there may be teething problems. Good reports dont hurt either ;)

Cheers,
Con

I can't get onto the OSDL site now, but I seem to remember staircase having some performance problems on a few things. Hackbench and reaim from memory... are these fixed? was I dreaming?

Definitely dreaming I'm afraid :D

The performance on both reaim and hackbench has always equalled or exceeded mainline so thanks for bringing it up.

Con

Oh OK. Weird :). I'll run a few tests when OSDL comes back up anyway.

Funny I just happen to have a few stored results which the urls do work for. Reaim normally on 8x with the default options gets about 7500-7700 jobs per minute.

Here are the links for 2.6.8-rc2-mm2 with default setting:
Peak load Test: Maximum Jobs per Minute 8248.40 (average of 3 runs) Quick Convergence Test: Maximum Jobs per Minute 7723.62 (average of 3 runs) http://khack.osdl.org/stp/295657/

in non interactive mode: Peak load Test: Maximum Jobs per Minute 8379.02 (average of 3 runs) Quick Convergence Test: Maximum Jobs per Minute 7922.50 (average of 3 runs) http://khack.osdl.org/stp/295658/

and in compute mode:
Peak load Test: Maximum Jobs per Minute 8590.94 (average of 3 runs) Quick Convergence Test: Maximum Jobs per Minute 8294.81 (average of 3 runs)
http://khack.osdl.org/stp/295659/

Con

(OSDL's search thingy still isn't working quite right, but I'll get back to you about this when it does.)

Otherwise, a couple of problems I noticed:

You removed things like this:
- /*
- * The idle thread is not allowed to schedule!
- * Remove this check after it has been exercised a bit.
- */
- if (unlikely(current == rq->idle) && current->state != TASK_RUNNING) {
- printk(KERN_ERR "bad: scheduling from the idle thread!\n");
- dump_stack();
- }
-
And child-runs-first in wake_up_new_task. Please don't.

Also, basic interactivity in X is bad with the interactive sysctl set to 0 (is X supposed to be at nice 0?), however fairness is bad when interactive is 1. I'm not sure if this is an acceptable tradeoff - are you planning to fix it?

It has interactivity problems with "thud". Also the mouse can freeze for .5 to 1 second when moving between windows while there is disk IO going on in the background (this is with interactive = 1). The test-starve problem is back.

Increasing priority (negative nice) doesn't have much impact. -20 CPU hog only gets about double the CPU of a 0 priority CPU hog and only about 120% the CPU time of a nice -10 hog.

It does child runs first by design in staircase. You don't need any more.

Well duh... disable interactivity and interactivity is bad. What's the problem? It's not meant to be used on a desktop in that way.

Why? A single user desktop is hardly needing extremely accurate cpu distribution... we see that already in 2.6.

Hmm? a minor mouse freeze with a _test_ starvation program is not starvation; nor is it an interactivity problem. Yours is the first complaint about interactivity during i/o.

-20 is 40 rr intervals. 0 is 20 rr intervals. +19 is 1 rr interval. Seems to me the cpu distribution is working our absolutely perfectly as designed.

Why is the only critic of this the person with a competing design? Does anyone else object to these things? I certainly dont feel objective enough to criticise yours.

Con

Oh ok. Well please don't remove the check anyway.

Well why would you want to disable it then?

No, I'm talking about one task getting *double* the amount of CPU as another, when it should actually be getting a little bit less.

The mouse was often freezing for me when moving over windows with IO running. That was an interactivity problem for me.

Thud itself isn't a problem I guess. Just thought you might like to know.

The test-starve problem actually is a problem though.

Well maybe it should be re designed. If an admin wants a task to get a decent amount of CPU, it is not reasonable to nice +19 everything else.

No need to get a bee in your bonet. I was pointing out some things that you need to fix if you are serious about this. I'd rather not replace the scheduler with a known broken one.

Oh, and I would very much like you to criticise mine :)

When not on a desktop of course - most servers don't care about X interactivity but do care a lot about 'nice', and would not want to grant a process the CPU (unfairly) longer to satisfy the human need for snappy responses.

http://www.PowerDNS.com      Open source, database driven DNS Software 
http://lartc.org           Linux Advanced Routing & Traffic Control HOWTO

Fairness is a pretty basic property though, and should not be dropped lightly. Even on the desktop, unfairness could be explicitly wrong for a small number of users, while also opening you up to "implicit" corner cases.

As far as interactivity goes maybe it can be disregarded on servers, maybe it can't. What about multi user servers? Does it only apply to X interactivity? Then how about multi user desktops? Maybe not a big deal.

Fairness should be fundamental though (IMO).

it also has clear interactivity problems when just running lots of CPU hogs even with the default interactive=1 compute=0 setting.

this is a property of the base scheduler as well.

We can do a nonlinear timeslice distribution trivially - the attached patch implements the following timeslice distribution ontop of 2.6.8-rc3:

[ -20 ... 0 ... 19 ] => [800ms ... 100ms ... 5ms]

the patch also cleans up some other aspects of timeslice calculations - with it applied nice +19 tasks will get 20 times less CPU time than default tasks. Previously it was 1:10.

the nice-20/nice+19 ratio is now 1:160 - sufficient for all aspects.

Ingo

@@ -68,8 +68,6 @@
 #define USER_PRIO(p)		((p)-MAX_RT_PRIO)
 #define TASK_USER_PRIO(p)	USER_PRIO((p)->static_prio)
 #define MAX_USER_PRIO		(USER_PRIO(MAX_PRIO))
-#define AVG_TIMESLICE	(MIN_TIMESLICE + ((MAX_TIMESLICE - MIN_TIMESLICE) *\
-			(MAX_PRIO-1-NICE_TO_PRIO(0))/(MAX_USER_PRIO - 1)))
 
 /*
  * Some helpers for converting nanosecond timing to jiffy resolution

@@ -80,12 +78,12 @@
 /*
  * These are the 'tuning knobs' of the scheduler:
  *
- * Minimum timeslice is 10 msecs, default timeslice is 100 msecs,
- * maximum timeslice is 200 msecs. Timeslices get refilled after
- * they expire.
+ * Minimum timeslice is 5 msecs (or 1 jiffy, whichever is larger),
+ * default timeslice is 100 msecs, maximum timeslice is 800 msecs.
+ * Timeslices get refilled after they expire.
  */
-#define MIN_TIMESLICE		( 10 * HZ / 1000)
-#define MAX_TIMESLICE		(200 * HZ / 1000)
+#define MIN_TIMESLICE		max(5 * HZ / 1000, 1)
+#define DEF_TIMESLICE		(100 * HZ / 1000)
 #define ON_RUNQUEUE_WEIGHT	 30
 #define CHILD_PENALTY		 95
 #define PARENT_PENALTY		100

@@ -93,7 +91,7 @@
 #define PRIO_BONUS_RATIO	 25
 #define MAX_BONUS		(MAX_USER_PRIO * PRIO_BONUS_RATIO / 100)
 #define INTERACTIVE_DELTA	  2
-#define MAX_SLEEP_AVG		(AVG_TIMESLICE * MAX_BONUS)
+#define MAX_SLEEP_AVG		(DEF_TIMESLICE * MAX_BONUS)
 #define STARVATION_LIMIT	(MAX_SLEEP_AVG)
 #define NS_MAX_SLEEP_AVG	(JIFFIES_TO_NS(MAX_SLEEP_AVG))
 #define CREDIT_LIMIT		100

@@ -162,23 +160,23 @@
 	((p)->prio < (rq)->curr->prio)
 
 /*
- * BASE_TIMESLICE scales user-nice values [ -20 ... 19 ]
- * to time slice values.
+ * task_timeslice() scales user-nice values [ -20 ... 0 ... 19 ]
+ * to time slice values: [800ms ... 100ms ... 5ms]
  *
  * The higher a thread's priority, the bigger timeslices
  * it gets during one round of execution. But even the lowest
  * priority thread gets MIN_TIMESLICE worth of execution time.
- *
- * task_timeslice() is the interface that is used by the scheduler.
  */
 
-#define BASE_TIMESLICE(p) (MIN_TIMESLICE + \
-		((MAX_TIMESLICE - MIN_TIMESLICE) * \
-			(MAX_PRIO-1 - (p)->static_prio) / (MAX_USER_PRIO-1)))
+#define SCALE_PRIO(x, prio) \
+	max(x * (MAX_PRIO - prio) / (MAX_USER_PRIO/2), MIN_TIMESLICE)
 
 static unsigned int task_timeslice(task_t *p)
 {
-	return BASE_TIMESLICE(p);
+	if (p->static_prio < NICE_TO_PRIO(0))
+		return SCALE_PRIO(DEF_TIMESLICE*4, p->static_prio);
+	else
+		return SCALE_PRIO(DEF_TIMESLICE, p->static_prio);
 }
 
 #define task_hot(p, now, sd) ((now) - (p)->timestamp < (sd)->cache_hot_time)

@@ -400,7 +398,7 @@ static void recalc_task_prio(task_t *p, 
 		if (p->mm && p->activated != -1 &&
 			sleep_time > INTERACTIVE_SLEEP(p)) {
 				p->sleep_avg = JIFFIES_TO_NS(MAX_SLEEP_AVG -
-						AVG_TIMESLICE);
+						DEF_TIMESLICE);
 				if (!HIGH_CREDIT(p))
 					p->interactive_credit++;
 		} else {

@@ -1024,8 +1022,8 @@ void fastcall sched_exit(task_t * p)
 	rq = task_rq_lock(p->parent, &flags);
 	if (p->first_time_slice) {
 		p->parent->time_slice += p->time_slice;
-		if (unlikely(p->parent->time_slice > MAX_TIMESLICE))
-			p->parent->time_slice = MAX_TIMESLICE;
+		if (unlikely(p->parent->time_slice > task_timeslice(p)))
+			p->parent->time_slice = task_timeslice(p);
 	}
 	if (p->sleep_avg < p->parent->sleep_avg)
 		p->parent->sleep_avg = p->parent->sleep_avg /

Ingo Molnar writes:

Thanks for replying.

Can you define them please? I haven't had any reported to me.

Cheers,
Con

sure: take a process that uses 85% of CPU time (and sleeps 15% of the time) if running on an idle system. Start just two of these hogs at normal priority. 2.6.8-rc2-mm2 becomes almost instantly unusable even over a text console: a single 'top' refresh takes ages, 'ls' displays one line per second or so. Start more of these and the system effectively locks up.

unapply staircase-cpu-scheduler-268-rc2-mm1.patch and the same workload becomes usable.

Ingo

It's only if I physically try and create such a test application that I can reproduce it. I haven't found any real world load that does that - but of course that doesn't mean I should discount it. However, interactive mode off doesn't exhibit it and it should be easy enough to fix for interactive mode on. Thanks for pointing it out.

Cheers,
Con

I can easily imagine this sort of real-life application. Anything that generate real-time data, such as sound or video for immediate playback will use some continous fraction of cpu, depending on how much data and how fast the cpu happens to be. A scheduler with such
a problem will now and then cause trouble when some processor needs just the
"wrong" percentage of its capacity to run the task(s). Consider someone playing several video files until he exceeds the capacity of the machine. Video skipping frames is then ok, a frozen UI is not. Or consider a multiuser machine running several games. Or even a parallell kernel compile when the source isn't cached. The compiler(s) will work for a while, wait for disk for a while, work for a while . . .

2.6.8-rc2-mm2 seems to work fine for me right now, but I hope there will be solutions for this sort of problem.

Helge Hafting

Your concerns are valid, and are relevant for _any_ scheduler design. However none of these occur with staircase. Ingo is describing a special case where it runs for more than 1ms and less than 10ms. Most things do not run exactly in this manner, which is why you haven't seen it, and neither have I till I created his test case.

As for the multiuser machine, this is actually an area where staircase _excels_ at when put into non-interactive mode. The fact that interactivity is not as good in interactive mode under load in a single desktop mode doesn't really describe that interactivity is still remarkably good considering how strict the cpu distribution is - and that's by design. I have now a couple of users using staircase in non-interactive mode sharing resources between up to 10 users happily, where previously the mainline 2.6 kernel was unable to do this in a fair manner.

Great.

Cheers,
Con

cool. Will be curious how it will look like once staircase-sched gets its time-shared slot in -mm next time around :-) But in general i'm quite positive about the staircase scheduler.

Ingo

*blush*. Well I shouldn't have singled out the staircase scheduler with this then.

I think I would prefer your nonlinear ratios better though.

Speaking of cleanups, I've got a little something.

 65 files changed, 274 insertions(+), 1076 deletions(-)

This mass slaughter of duplicated code is a cleanup of /proc/profile that consolidates code across all arches and privatizes private state. Compiletested on x86-64. Prior incarnations of earlier cleanups this is based on were runtime tested on ia32, x86-64, sparc64, and alpha.

The purpose of these cleanups in their prior incarnations has been for use as a preparatory cleanup for profiling other kinds of events in /proc/profile's buffer (or similar buffers). There has recently been a need to discover which codepaths were responsible for leaking inodes that were leaking that similar cleanups in combination with some slab profiling hooks are being used to instrument.

In order, the patches of the series (included as a series of separate MIME attachments to this post) are:
consolidate-prof_cpu_mask.patch
Handling of prof_cpu_mask is grossly inconsistent. Some arches have it as a cpumask_t, others unsigned long, and even within arches it's treated inconsistently. This makes it cpumask_t across the board, and consolidates the handling in kernel/profile.c
profile_pc.patch
The program counter calculation from pt_regs is the only portion of profile accounting that differs across various architectures. This is usually instruction_pointer(regs), but to handle the few arches where it isn't, introduce profile_pc().
profile_tick.patch
With prof_cpu_mask and profile_pc() in hand, the core is now able to perform all the profile accounting work on behalf of arches. Consolidate the profile accounting and convert all arches to call the core function.
move-profile-operations.patch
proc_misc.c is a trainwreck. Move the file_operations for /proc/profile into kernel/profile.c and call the profiling setup from proc_misc_init().
static-profile-state.patch
Make the various bits of state no longer used anywhere else static to kernel/profile.c
atomic-prof_buffer.patch
Convert prof_buffer to an array of atomic_t instead of sometimes atomic_t, sometimes unsigned int. Also, bootmem rounds up internally, so blow away some crap code there.

-- wli

Successfully runtime-tested on x86-64 in combination with patches to unrelated areas of the kernel (poisoning certain portions of certain data structures that should not need to be allocated and should never be accessed). Zero userspace-visible changes to output or interface.

-- wli

Nuke the real undefined symbol in sparc32. This is the only real hit from ldchk on sparc32; the rest are all btfixup-related (Sam Ravnborg and I are working on addressing that).

Index: mm1-2.6.8-rc2/arch/sparc/kernel/entry.S
===================================================================
@@ -858,7 +858,7 @@
 vac_hwflush_patch2_on:		sta	%g0, [%l3 + %l7] ASI_HWFLUSHSEG
 
 	.globl	invalid_segment_patch1, invalid_segment_patch2
-	.globl	num_context_patch1, num_context_patch2
+	.globl	num_context_patch1
 	.globl	vac_linesize_patch, vac_hwflush_patch1
 	.globl	vac_hwflush_patch2
 

Index: mm1-2.6.8-rc2/arch/sparc/mm/sun4c.c
===================================================================
@@ -379,7 +379,7 @@
 extern unsigned long invalid_segment_patch2, invalid_segment_patch2_ff;
 extern unsigned long invalid_segment_patch1_1ff, invalid_segment_patch2_1ff;
 extern unsigned long num_context_patch1, num_context_patch1_16;
-extern unsigned long num_context_patch2, num_context_patch2_16;
+extern unsigned long num_context_patch2_16;
 extern unsigned long vac_linesize_patch, vac_linesize_patch_32;
 extern unsigned long vac_hwflush_patch1, vac_hwflush_patch1_on;
 extern unsigned long vac_hwflush_patch2, vac_hwflush_patch2_on;

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Noting the large wad of x86-64 stuff in here, I'm going to give it a whirl. Stupid question though - do I apply this to 2.6.8rc2 or does it bring 2.6.7 up to rc2-mm2 ?

Mark.

- --
Mark Watts
Senior Systems Engineer
QinetiQ Trusted Information Management
Trusted Solutions and Services group
GPG Public Key ID: 455420ED

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFBDl5MBn4EFUVUIO0RAipIAJ9u1XlOFfN8/QO+U6gci2kOP03MOQCfaC3Q nwgA0cV4jlPLdwDiOSOCleg=
=av2L
-----END PGP SIGNATURE-----

You apply it to rc2.

--
Jesper Juhl <[email protected]>

you must apply to 2.6.8-rc2

dominik

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Great - compiled up a treat...

Mark.

- --
Mark Watts
Senior Systems Engineer
QinetiQ Trusted Information Management
Trusted Solutions and Services group
GPG Public Key ID: 455420ED

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFBDmWnBn4EFUVUIO0RAtueAKCoAYC9v4AVLC1b/OGQZjlUJ9I61gCfav16 8bMpGcs8RgKk9LrnyfqmZD8=
=IARw
-----END PGP SIGNATURE-----

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Mark Watts wrote:
|
| Noting the large wad of x86-64 stuff in here, I'm going to give it a whirl.
| Stupid question though - do I apply this to 2.6.8rc2 or does it bring 2.6.7
| up to rc2-mm2 ?

1) you have to apply rc2 first
2) please _DO_ _NOT_ *NEVER* *EVER* make a full quote of mails. in this case you just sent ~49KB (-2KB from your mail) to perhaps 10.000 subscribers worldwide. just make a samll multiplication and think of saving bandwith in the future. Thank you very much.

- --
Clemens Schwaighofer - IT Engineer & System Administration
==========================================================
TEQUILA\Japan, 6-17-2 Ginza Chuo-ku, Tokyo 104-8167, JAPAN
Tel: +81-(0)3-3545-7703 Fax: +81-(0)3-3545-7343
http://www.tequila.co.jp
==========================================================
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFBDzbFjBz/yQjBxz8RAgQKAJ9h6a1KnPRalqquOK/crt9gQpL9JgCcCLCC ckcMIW6UpTO3LdyPhP9CGoA=
=aHov
-----END PGP SIGNATURE-----

Hmm, I tried 2.6.8-rc2-mm2 but the
sound is a little bit jerky under UT2004.

I go back to -rc2-mm1 (that last version that was really great)

ps.: Thanks for the good work, hope the problems will go away soon...

Regards,
Martin

MyExcuse:
short leg on process table

Martin Zwickel <[email protected]>
Research & Development

TechnoTrend AG <http://www.technotrend.de>

Linux 2.6 (mm tree) Compile Statistics (gcc 3.2.2)

Kernel bzImage bzImage bzImage modules bzImage modules
(defconfig) (allno) (allyes) (allyes) (allmod) (allmod)
--------------- ---------- -------- -------- -------- -------- --------

2.6.8-rc2-mm2     0w/0e     4w/5e    87w/9e    4w/0e   1w/0e     80w/0e
2.6.8-rc2-mm1     0w/0e     0w/0e    83w/9e    3w/0e   1w/0e     81w/0e
2.6.8-rc1-mm1     0w/0e     0w/0e    88w/9e    5w/0e   1w/0e     87w/0e
2.6.7-mm7         0w/0e     0w/0e    89w/9e    5w/0e   1w/0e     84w/0e
2.6.7-mm6         0w/0e     0w/0e    85w/9e    5w/0e   1w/0e     80w/0e
2.6.7-mm5         0w/0e     0w/0e    92w/0e    5w/0e   1w/0e     87w/0e
2.6.7-mm4         0w/0e     0w/0e    94w/0e    5w/0e   1w/0e     89w/0e
2.6.7-mm3         0w/0e     0w/0e    90w/6e    5w/0e   1w/0e     86w/0e
2.6.7-mm2         0w/0e     0w/0e   109w/0e    7w/0e   1w/0e    106w/0e
2.6.7-mm1         0w/0e     5w/0e   108w/0e    5w/0e   1w/0e    104w/0e
2.6.7-rc3-mm2     0w/0e     5w/0e   105w/10e   5w/0e   2w/0e    100w/2e
2.6.7-rc3-mm1     0w/0e     5w/0e   104w/10e   5w/0e   2w/0e    100w/2e
2.6.7-rc2-mm2     0w/0e     5w/0e   109w/10e   5w/0e   2w/0e    105w/2e
2.6.7-rc2-mm1     0w/0e    12w/0e   158w/13e   5w/0e   3w/0e    153w/4e
2.6.7-rc1-mm1     0w/0e     6w/0e   108w/0e    5w/0e   2w/0e    104w/0e
2.6.6-mm5         0w/0e     0w/0e   109w/5e    5w/0e   2w/0e    110w/0e
2.6.6-mm4         0w/0e     0w/0e   112w/9e    5w/0e   2w/5e    106w/1e
2.6.6-mm3         3w/9e     0w/0e   120w/26e   5w/0e   2w/0e    114w/10e
2.6.6-mm2         4w/11e    0w/0e   120w/24e   6w/0e   2w/0e    118w/9e
2.6.6-mm1         1w/0e     0w/0e   118w/25e   6w/0e   2w/0e    114w/10e
2.6.6-rc3-mm2     0w/0e     0w/0e   117w/ 0e   8w/0e   2w/0e    116w/0e
2.6.6-rc3-mm1     0w/0e     0w/0e   120w/10e   8w/0e   2w/0e    152w/2e
2.6.6-rc2-mm2     0w/0e     1w/5e   118w/ 0e   8w/0e   3w/0e    118w/0e
2.6.6-rc2-mm1     0w/0e     0w/0e   115w/ 0e   7w/0e   3w/0e    116w/0e
2.6.6-rc1-mm1     0w/0e     0w/7e   122w/ 0e   7w/0e   4w/0e    122w/0e
2.6.5-mm6         0w/0e     0w/0e   123w/ 0e   7w/0e   4w/0e    124w/0e
2.6.5-mm5         0w/0e     0w/0e   119w/ 0e   7w/0e   4w/0e    120w/0e
2.6.5-mm4         0w/0e     0w/0e   120w/ 0e   7w/0e   4w/0e    121w/0e
2.6.5-mm3         0w/0e     1w/0e   121w/12e   7w/0e   3w/0e    123w/0e
2.6.5-mm2         0w/0e     0w/0e   128w/12e   7w/0e   3w/0e    134w/0e
2.6.5-mm1         0w/0e     5w/0e   122w/ 0e   7w/0e   3w/0e    124w/0e
2.6.5-rc3-mm4     0w/0e     0w/0e   124w/ 0e   8w/0e   4w/0e    126w/0e
2.6.5-rc3-mm3     0w/0e     5w/0e   129w/14e   8w/0e   4w/0e    129w/6e
2.6.5-rc3-mm2     0w/0e     5w/0e   130w/14e   8w/0e   4w/0e    129w/6e
2.6.5-rc3-mm1     0w/0e     5w/0e   129w/ 0e   8w/0e   4w/0e    129w/0e
2.6.5-rc2-mm5     0w/0e     5w/0e   130w/ 0e   8w/0e   4w/0e    129w/0e
2.6.5-rc2-mm4     0w/0e     5w/0e   134w/ 0e   8w/0e   3w/0e    133w/0e
2.6.5-rc2-mm3     0w/0e     5w/0e   134w/ 0e   8w/0e   3w/0e    133w/0e
2.6.5-rc2-mm2     0w/0e     5w/0e   137w/ 0e   8w/0e   3w/0e    134w/0e
2.6.5-rc2-mm1     0w/0e     5w/0e   136w/ 0e   8w/0e   3w/0e    134w/0e
2.6.5-rc1-mm2     0w/0e     5w/0e   135w/ 5e   8w/0e   3w/0e    133w/0e
2.6.5-rc1-mm1     0w/0e     5w/0e   135w/ 5e   8w/0e   3w/0e    133w/0e
2.6.4-mm2         1w/2e     5w/2e   144w/10e   8w/0e   3w/2e    144w/0e
2.6.4-mm1         1w/0e     5w/0e   146w/ 5e   8w/0e   3w/0e    144w/0e
2.6.4-rc2-mm1     1w/0e     5w/0e   146w/12e  11w/0e   3w/0e    147w/2e
2.6.4-rc1-mm2     1w/0e     5w/0e   144w/ 0e  11w/0e   3w/0e    145w/0e
2.6.4-rc1-mm1     1w/0e     5w/0e   147w/ 5e  11w/0e   3w/0e    147w/0e
2.6.3-mm4         1w/0e     5w/0e   146w/ 0e   7w/0e   3w/0e    142w/0e
2.6.3-mm3         1w/2e     5w/2e   146w/15e   7w/0e   3w/2e    144w/5e
2.6.3-mm2         1w/8e     5w/0e   140w/ 0e   7w/0e   3w/0e    138w/0e
2.6.3-mm1         1w/0e     5w/0e   143w/ 5e   7w/0e   3w/0e    141w/0e
2.6.3-rc3-mm1     1w/0e     0w/0e   144w/13e   7w/0e   3w/0e    142w/3e
2.6.3-rc2-mm1     1w/0e     0w/265e 144w/ 5e   7w/0e   3w/0e    145w/0e
2.6.3-rc1-mm1     1w/0e     0w/265e 141w/ 5e   7w/0e   3w/0e    143w/0e
2.6.2-mm1         2w/0e     0w/264e 147w/ 5e   7w/0e   3w/0e    173w/0e
2.6.2-rc3-mm1     2w/0e     0w/265e 146w/ 5e   7w/0e   3w/0e    172w/0e
2.6.2-rc2-mm2     0w/0e     0w/264e 145w/ 5e   7w/0e   3w/0e    171w/0e
2.6.2-rc2-mm1     0w/0e     0w/264e 146w/ 5e   7w/0e   3w/0e    172w/0e
2.6.2-rc1-mm3     0w/0e     0w/265e 144w/ 8e   7w/0e   3w/0e    169w/0e
2.6.2-rc1-mm2     0w/0e     0w/264e 144w/ 5e  10w/0e   3w/0e    171w/0e
2.6.2-rc1-mm1     0w/0e     0w/264e 144w/ 5e  10w/0e   3w/0e    171w/0e
2.6.1-mm5         2w/5e     0w/264e 153w/11e  10w/0e   3w/0e    180w/0e
2.6.1-mm4         0w/821e   0w/264e 154w/ 5e   8w/1e   5w/0e    179w/0e
2.6.1-mm3         0w/0e     0w/0e   151w/ 5e  10w/0e   3w/0e    177w/0e
2.6.1-mm2         0w/0e     0w/0e   143w/ 5e  12w/0e   3w/0e    171w/0e
2.6.1-mm1         0w/0e     0w/0e   146w/ 9e  12w/0e   6w/0e    171w/0e
2.6.1-rc2-mm1     0w/0e     0w/0e   149w/ 0e  12w/0e   6w/0e    171w/4e
2.6.1-rc1-mm2     0w/0e     0w/0e   157w/15e  12w/0e   3w/0e    185w/4e
2.6.1-rc1-mm1     0w/0e     0w/0e   156w/10e  12w/0e   3w/0e    184w/2e
2.6.0-mm2         0w/0e     0w/0e   161w/ 0e  12w/0e   3w/0e    189w/0e
2.6.0-mm1         0w/0e     0w/0e   173w/ 0e  12w/0e   3w/0e    212w/0e

Web page with links to complete details:
http://developer.osdl.org/cherry/compile/

John

This breaks compilation with CONFIG_SWAP=n:

<-- snip -->

...
CC kernel/fork.o
kernel/fork.c: In function `mmput':
kernel/fork.c:471: warning: implicit declaration of function `put_swap_token'
...
CC mm/filemap.o
mm/filemap.c: In function `filemap_nopage':
mm/filemap.c:1250: warning: implicit declaration of function `grab_swap_token'
...
CC mm/memory.o
mm/memory.c: In function `do_swap_page':
mm/memory.c:1375: warning: implicit declaration of function `grab_swap_token'
...
CC mm/rmap.o
mm/rmap.c: In function `page_referenced_one':
mm/rmap.c:233: warning: implicit declaration of function `has_swap_token'
...
LD .tmp_vmlinux1
kernel/built-in.o(.text+0x1ccf): In function `mmput':
: undefined reference to put_swap_token' mm/built-in.o(.text+0x1542): In function filemap_nopage':
: undefined reference to grab_swap_token' mm/built-in.o(.text+0x131c9): In function page_referenced_one':
: undefined reference to `has_swap_token'
make: *** [.tmp_vmlinux1] Error 1

<-- snip -->

The bug is obvious:

#ifdef CONFIG_SWAP
...
#ifdef CONFIG_SWAP
...
#else
...
#endif
...
#else
...
#endif

Additional, the dummy grab_swap_token and has_swap_token weren't correct.

diffstat output:

 include/linux/swap.h |   43 +++++++++++++++++++++----------------------
 1 files changed, 21 insertions(+), 22 deletions(-)

@@ -204,28 +204,6 @@
 extern struct page * lookup_swap_cache(swp_entry_t);
 extern struct page * read_swap_cache_async(swp_entry_t, struct vm_area_struct *vma,
 					   unsigned long addr);
-/* linux/mm/thrash.c */
-#ifdef CONFIG_SWAP
-extern struct mm_struct * swap_token_mm;
-extern void grab_swap_token(void);
-extern void __put_swap_token(struct mm_struct *);
-
-static inline int has_swap_token(struct mm_struct *mm)
-{
-	return (mm == swap_token_mm);
-}
-
-static inline void put_swap_token(struct mm_struct *mm)
-{
-	if (has_swap_token(mm))
-		__put_swap_token(mm);
-}
-#else /* CONFIG_SWAP */
-#define put_swap_token(x) do { } while(0)
-#define grab_swap_token  do { } while(0)
-#define has_swap_token 0
-#endif /* CONFIG_SWAP */
-
 /* linux/mm/swapfile.c */
 extern long total_swap_pages;
 extern unsigned int nr_swapfiles;

@@ -250,6 +228,22 @@
 #define swap_device_lock(p)	spin_lock(&p->sdev_lock)
 #define swap_device_unlock(p)	spin_unlock(&p->sdev_lock)
 
+/* linux/mm/thrash.c */
+extern struct mm_struct * swap_token_mm;
+extern void grab_swap_token(void);
+extern void __put_swap_token(struct mm_struct *);
+
+static inline int has_swap_token(struct mm_struct *mm)
+{
+	return (mm == swap_token_mm);
+}
+
+static inline void put_swap_token(struct mm_struct *mm)
+{
+	if (has_swap_token(mm))
+		__put_swap_token(mm);
+}
+
 #else /* CONFIG_SWAP */
 
 #define total_swap_pages			0

@@ -287,6 +281,11 @@
 	return entry;
 }
 
+/* linux/mm/thrash.c */
+#define put_swap_token(x) do { } while(0)
+#define grab_swap_token()  do { } while(0)
+#define has_swap_token(x) 0
+
 #endif /* CONFIG_SWAP */
 #endif /* __KERNEL__*/
 #endif /* _LINUX_SWAP_H */

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Something bad might have slipped in to do with dual opterons.

Whenever I boot, I get a kernel panic right after it brings up the processors.

console=ttyS0 only lets me see
'Kernel unable to handle ...' with the rest cut off.

If I boot normally, there's a couple of oops' or panics on the screen but the roll by to fast to see.

.config is attched and its the same config that boots 2.6.8rc2 just fine.

Mark.

- --
Mark Watts
Senior Systems Engineer
QinetiQ Trusted Information Management
Trusted Solutions and Services group
GPG Public Key ID: 455420ED

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)

iD8DBQFBD0xmBn4EFUVUIO0RAr19AJ4jrPYmN84UESOthxVggHiulIC3egCgg3OI cFlbZnuHPlEKwzfJs/eyHcE=
=ne1g
-----END PGP SIGNATURE-----

#
# Automatically generated make config: don't edit
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_HPET_TIMER=y
# CONFIG_HPET_EMULATE_RTC is not set
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_PAGG is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HOTPLUG=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Processor type and features
#
CONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
# CONFIG_PREEMPT is not set
# CONFIG_SCHED_SMT is not set
CONFIG_K8_NUMA=y
CONFIG_DISCONTIGMEM=y
CONFIG_NUMA=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_NR_CPUS=8
CONFIG_GART_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y

#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set

#
# Power management options
#
CONFIG_PM=y
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""

#
# ACPI (Advanced Configuration and Power Interface) Support #
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_TOSHIBA=m
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_PROC_INTF=m CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m
# CONFIG_CPU_FREQ_24_API is not set CONFIG_CPU_FREQ_TABLE=m

#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_POWERNOW_K8_ACPI=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_UID16=y

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set

#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_PARTITIONS=m
CONFIG_MTD_CONCAT=m
CONFIG_MTD_REDBOOT_PARTS=m
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
# CONFIG_NFTL_RW is not set
CONFIG_INFTL=m

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_AMDSTD_RETRY=0
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=m

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x4000000
CONFIG_MTD_PHYSMAP_BUSWIDTH=2
CONFIG_MTD_PNC2000=m
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
# CONFIG_MTD_SCx200_DOCFLASH is not set
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=m
CONFIG_MTD_DILNETPC=m
CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
# CONFIG_MTD_L440GX is not set

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_SLRAM=m
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLKMTD=m

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
CONFIG_MTD_DOCPROBE_HIGH=y
CONFIG_MTD_DOCPROBE_55AA=y

#
# NAND Flash Device Drivers
#
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_IDS=m
# CONFIG_MTD_NAND_DISKONCHIP is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_OTHER=y
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m

#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m

#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=32000
CONFIG_BLK_DEV_INITRD=y
CONFIG_LBD=y
# CONFIG_CDROM_PKTCDVD is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_IDE_TASK_IOCTL=y
# CONFIG_IDE_TASKFILE_IO is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_ATIIXP is not set
CONFIG_BLK_DEV_CMD64X=y
CONFIG_BLK_DEV_TRIFLEX=m
# CONFIG_BLK_DEV_CY82C693 is not set
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_HPT34X=y
CONFIG_HPT34X_AUTODMA=y
CONFIG_BLK_DEV_HPT366=y
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8212 is not set
# CONFIG_BLK_DEV_NS87415 is not set
CONFIG_BLK_DEV_PDC202XX_OLD=y
# CONFIG_PDC202XX_BURST is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_PDC202XX_FORCE=y
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SIS5513=y
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m

#
# SCSI low-level drivers
#
CONFIG_BLK_DEV_3W_XXXX_RAID=m
# CONFIG_SCSI_3W_9XXX is not set
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_MEGARAID=m
CONFIG_SCSI_SATA=y
CONFIG_SCSI_SATA_SVW=m
CONFIG_SCSI_ATA_PIIX=m
# CONFIG_SCSI_SATA_NV is not set
CONFIG_SCSI_SATA_PROMISE=m
# CONFIG_SCSI_SATA_SX4 is not set
CONFIG_SCSI_SATA_SIL=m
# CONFIG_SCSI_SATA_SIS is not set
CONFIG_SCSI_SATA_VIA=m
# CONFIG_SCSI_SATA_VITESSE is not set
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_EATA_PIO=m
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
CONFIG_SCSI_QLOGIC_ISP=m
CONFIG_SCSI_QLOGIC_FC=m
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA2XXX=m
CONFIG_SCSI_QLA21XX=m
CONFIG_SCSI_QLA22XX=m
CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m
CONFIG_SCSI_QLA6312=m
CONFIG_SCSI_QLA6322=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_DEBUG=m

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=m
CONFIG_MD_RAID6=m
CONFIG_MD_MULTIPATH=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y

#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=m
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_NAT=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m

#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_PHYSDEV=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_COMPAT_IPFWADM=m
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set

#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AHESP=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
# CONFIG_IP6_NF_RAW is not set

#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m

#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_HMAC_NONE=y
# CONFIG_SCTP_HMAC_SHA1 is not set
# CONFIG_SCTP_HMAC_MD5 is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
# CONFIG_DECNET_SIOCGIFCONF is not set
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
# CONFIG_NET_DIVERT is not set
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
# CONFIG_BT_HIDP is not set

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_BCSP_TXCRC=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_ETHERTAP=m

#
# ARCnet devices
#
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_PCI=m

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_HP100=m
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_AMD8111_ETH is not set
CONFIG_ADAPTEC_STARFIRE=m
# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
CONFIG_B44=m
CONFIG_FORCEDETH=m
CONFIG_DGRS=m
CONFIG_EEPRO100=m
# CONFIG_EEPRO100_PIO is not set
CONFIG_E100=m
# CONFIG_E100_NAPI is not set
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_VIA_VELOCITY is not set

#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
# CONFIG_E1000_NAPI is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
# CONFIG_R8169_NAPI is not set
CONFIG_SK98LIN=m
CONFIG_TIGON3=m

#
# Ethernet (10000 Mbit)
#
CONFIG_IXGB=m
# CONFIG_IXGB_NAPI is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
CONFIG_TR=y
CONFIG_IBMOL=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_ABYSS=m

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y

#
# Obsolete Wireless cards support (pre-802.11)
#
CONFIG_STRIP=m

#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support #
# CONFIG_PRISM54 is not set CONFIG_NET_WIRELESS=y

#
# Wan interfaces
#
CONFIG_WAN=y
# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
# CONFIG_SYNCLINK_SYNCPPP is not set
CONFIG_HDLC=m
CONFIG_HDLC_RAW=y
CONFIG_HDLC_RAW_ETH=y
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
CONFIG_HDLC_X25=y
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300=m
# CONFIG_PC300_MLPPP is not set
CONFIG_FARSYNC=m
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_WAN_ROUTER_DRIVERS=y
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
# CONFIG_LAPBETHER is not set
# CONFIG_X25_ASY is not set
CONFIG_SBNI=m
CONFIG_SBNI_MULTILINE=y

#
# ATM drivers
#
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
# CONFIG_ATM_AMBASSADOR is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_FORE200E_MAYBE=m
CONFIG_ATM_FORE200E_PCA=y
CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_FORE200E=m
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_SKFP=m
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_SHAPER=m
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_TSDEV=m
CONFIG_INPUT_TSDEV_SCREEN_X=240
CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
CONFIG_GAMEPORT=m
CONFIG_SOUND_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_VORTEX=m
CONFIG_GAMEPORT_FM801=m
CONFIG_GAMEPORT_CS461x=m
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
# CONFIG_SERIO_RAW is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDDLER=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_UINPUT=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=m
# CONFIG_CYCLADES is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_N_HDLC=m
CONFIG_STALDRV=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_TIPAR=m
CONFIG_QIC02_TAPE=m
CONFIG_QIC02_DYNCONF=y

#
# Setting runtime QIC-02 configuration is done with qic02conf #

#

# from the tpqic02-support package.  It is available at
#

#

# metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/
#

#
# IPMI
#
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m

#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_WAFER_WDT=m
CONFIG_I8XX_TCO=m
CONFIG_SC1200_WDT=m
CONFIG_SCx200_WDT=m
CONFIG_60XX_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_MACHZ_WDT=m

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m

#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL_MCH is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
# CONFIG_DRM_SIS is not set
CONFIG_MWAVE=m
CONFIG_RAW_DRIVER=m
# CONFIG_HPET is not set
CONFIG_MAX_RAW_DEVS=256
CONFIG_HANGCHECK_TIMER=m

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
# CONFIG_I2C_I810 is not set
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m

#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
CONFIG_SENSORS_ADM1021=m
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_DS1621 is not set
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM75=m
# CONFIG_SENSORS_LM77 is not set
CONFIG_SENSORS_LM78=m
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM90=m
# CONFIG_SENSORS_MAX1619 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83L785TS=m
# CONFIG_SENSORS_W83627HF is not set

#
# Other I2C Chip support
#
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set

#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set

#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=m

#
# Supported Frontend Modules
#
CONFIG_DVB_STV0299=m
CONFIG_DVB_SP887X=m CONFIG_DVB_SP887X_FIRMWARE_FILE="/usr/lib/hotplug/firmware/sc_main.mc" CONFIG_DVB_ALPS_TDLB7=m
CONFIG_DVB_ALPS_TDMB7=m
CONFIG_DVB_ATMEL_AT76C651=m
CONFIG_DVB_CX24110=m
CONFIG_DVB_GRUNDIG_29504_491=m CONFIG_DVB_GRUNDIG_29504_401=m
CONFIG_DVB_MT312=m
CONFIG_DVB_VES1820=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TDA1004X=m CONFIG_DVB_TDA1004X_FIRMWARE_FILE="/etc/dvb/tda1004x.bin"
# CONFIG_DVB_NXT6000 is not set

#
# Supported SAA7146 based PCI Adapters
#
CONFIG_DVB_AV7110=m
# CONFIG_DVB_AV7110_FIRMWARE is not set
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m

#
# Supported USB Adapters
#
CONFIG_DVB_TTUSB_BUDGET=m
# CONFIG_DVB_TTUSB_DEC is not set

#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_SKYSTAR=m

#
# Supported BT878 Adapters
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_VIDEOBUF=m
CONFIG_VIDEO_BUF=m

#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
CONFIG_FB_IMSTT=y
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_MDA_CONSOLE=m
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_BIT32_EMUL is not set
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_ALI5451=m
# CONFIG_SND_ATIIXP is not set
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS4281=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_KORG1212=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_HDSP=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_ALS4000=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X is not set
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
CONFIG_SND_SONICVIBES=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VX222=m

#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set

#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_BT878=m
CONFIG_SOUND_CMPCI=m CONFIG_SOUND_CMPCI_FM=y CONFIG_SOUND_CMPCI_MIDI=y CONFIG_SOUND_CMPCI_JOYSTICK=y CONFIG_SOUND_EMU10K1=m
# CONFIG_MIDI_EMU10K1 is not set CONFIG_SOUND_FUSION=m
CONFIG_SOUND_CS4281=m
CONFIG_SOUND_ES1370=m
CONFIG_SOUND_ES1371=m CONFIG_SOUND_ESSSOLO1=m CONFIG_SOUND_MAESTRO=m CONFIG_SOUND_MAESTRO3=m
CONFIG_SOUND_ICH=m CONFIG_SOUND_SONICVIBES=m CONFIG_SOUND_TRIDENT=m CONFIG_SOUND_MSNDCLAS=m CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin" CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin" CONFIG_SOUND_MSNDPIN=m CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin" CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin" CONFIG_SOUND_VIA82CXXX=m
# CONFIG_MIDI_VIA82CXXX is not set CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set CONFIG_SOUND_AD1816=m
CONFIG_SOUND_AD1889=m CONFIG_SOUND_SGALAXY=m
CONFIG_SOUND_ADLIB=m CONFIG_SOUND_ACI_MIXER=m CONFIG_SOUND_CS4232=m
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_GUS=m
# CONFIG_SOUND_GUS16 is not set CONFIG_SOUND_GUSMAX=y
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_NM256=m
CONFIG_SOUND_MAD16=m
# CONFIG_MAD16_OLDCARD is not set CONFIG_SOUND_PAS=m
CONFIG_SOUND_PSS=m
# CONFIG_PSS_MIXER is not set
# CONFIG_PSS_HAVE_BOOT is not set CONFIG_SOUND_SB=m CONFIG_SOUND_AWE32_SYNTH=m CONFIG_SOUND_WAVEFRONT=m CONFIG_SOUND_MAUI=m
CONFIG_SOUND_YM3812=m CONFIG_SOUND_OPL3SA1=m CONFIG_SOUND_OPL3SA2=m CONFIG_SOUND_YMFPCI=m CONFIG_SOUND_YMFPCI_LEGACY=y CONFIG_SOUND_UART6850=m CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4 CONFIG_SC6600_CDROMBASE=0x0 CONFIG_AEDSP16_MSS=y
# CONFIG_AEDSP16_SBPRO is not set CONFIG_AEDSP16_MPU401=y
# CONFIG_SOUND_TVMIXER is not set CONFIG_SOUND_KAHLUA=m CONFIG_SOUND_ALI5455=m
CONFIG_SOUND_FORTE=m
CONFIG_SOUND_RME96XX=m CONFIG_SOUND_AD1980=m

#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m

#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m

#
# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem #
CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
CONFIG_USB_XPAD=m
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_HPUSBSCSI=m

#
# USB Multimedia devices
#
CONFIG_USB_DABUSB=m
CONFIG_USB_VICAM=m
CONFIG_USB_DSBR=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_OV511=m
CONFIG_USB_PWC=m
CONFIG_USB_SE401=m
# CONFIG_USB_SN9C102 is not set
CONFIG_USB_STV680=m

#
# USB Network adaptors
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m

#
# USB Host-to-Host Cables
#
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_GENESYS=y
CONFIG_USB_NET1080=y
CONFIG_USB_PL2301=y

#
# Intelligent USB Devices/Gadgets
#
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_ZAURUS=y
CONFIG_USB_CDCETHER=y

#
# USB Network Adapters
#
CONFIG_USB_AX8817X=y

#
# USB port drivers
#
CONFIG_USB_USS720=m

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_TIGL=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_SPEEDTOUCH=m
# CONFIG_USB_PHIDGETSERVO is not set
CONFIG_USB_TEST=m

#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_SA1100 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m

#
# Firmware Drivers
#
# CONFIG_EDD is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS_FS=m
CONFIG_JFFS_FS_VERBOSE=0
# CONFIG_JFFS_PROC_FS is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_NAND is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
# CONFIG_QNX4FS_RW is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_POSIX is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
# CONFIG_NCPFS_IOCTL_LOCKING is not set
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
CONFIG_RXRPC=m

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_EFI_PARTITION=y