Skip to contentSkip to conversation

Installed alsa (1.0.5)into 2.6.7 kernel:says nosoundcards

DISCUSSION SailajaReddy K 2 participants 2 messages Aug 10, 2004

lore
Share & tools
lore
#0 lore raw

Hi,.
*I have installed alsa driver,lib, utilities successfully. But I couldn't see any cards in my system. Please see below outputs:
**[root@aims-pc-100 alsa]# cat /proc/asound/cards

      --- no soundcards ---

**[root@aims-pc-100 alsa]# cat /proc/asound/devices
1: : sequencer
33: : timer
**[root@aims-pc-100 alsa]# alsamixer

alsamixer: function snd_ctl_open failed for default: No such device
**[root@aims-pc-100 root]# lsmod
Module Size Used by
snd_seq_oss 35712 -
snd_seq_midi_event 7396 -
snd_seq 55824 -
snd_pcm_oss 52556 -
snd_mixer_oss 19076 -
snd_ice1712 65316 -
snd_ice17xx_ak4xxx 4004 -
snd_pcm 96736 -
snd_page_alloc 11500 -
snd_timer 25028 -
snd_ak4xxx_adda 5860 -
snd_cs8427 10660 -
snd_ac97_codec 71048 -
snd_i2c 5668 -
snd_mpu401_uart 7716 -
snd_rawmidi 24384 -
snd_seq_device 8136 -
snd 55588 -
soundcore 9152 -
autofs 16868 -
8139too 25540 -
ohci1394 34820 -
ieee1394 108976 -
parport_pc 24960 -
parport 40544 -
ehci_hcd 28900 -
usbcore 111828 -

Am I missing something?

What else I need to do and check to confirm that ALSA is working fine for my card "ICE1712 - M Audio Delta 1010"?

Pleeeeeeeeeeease help me out.

The below are the exact steps I have followed:
*Installed redhat linux 9.0 (inbuilt kernel 2.4.20-8)
*Upgraded kernel to 2.6.7, not selected for ALSA(or OSS) inclusion in kernel configuration. Selected only sound. *Downloaded alsa-driver-1.0.5a,alsa-lib-1.0.5, alsa-utils-1.0.5 and alsa-oss-1.0.5 from http://www.alsa-project.org.
*Installed alsa-driver-1.0.5a using the following:
% ./configure --with-cards=ice1712 --with-sequencer=yes && make
% make install
% ./snddevices
% chmod a+rw /dev/dsp /dev/mixer /dev/sequencer /dev/midi
*Installed alsa-lib-1.0.5 using the following:
% ./configure;make;make install
*Installed alsa-utils-1.0.5 using the following:
% ./configure;make;make install
*Installed alsa-oss-1.0.5 using the following:
% ./configure;make;make install
*modprobe snd-ice1712;modprobe snd-pcm-oss;modprobe snd-mixer-oss;modprobe snd-seq-oss
*my /etc/modules.conf
[I am not sure whether this is ok or not, please correct me if I am wrong]
alias eth0 8139too
alias usb-controller ehci-hcd
alias usb-controller1 usb-uhci
alias sound-slot-0 i810_audio
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || :
# ALSA portion
alias char-major-116 snd
alias snd-card-0 snd-ice1712

  # module options should go here
  # OSS/Free portion
  alias char-major-14 soundcore
  alias sound-slot-0 snd-card-0
  # card #1
  alias sound-service-0-0 snd-mixer-oss
  alias sound-service-0-1 snd-seq-oss
  alias sound-service-0-3 snd-pcm-oss
  alias sound-service-0-8 snd-seq-oss
  alias sound-service-0-12 snd-pcm-oss
  # OSS/Free portion - card #2
  alias sound-service-1-0 snd-mixer-oss
  alias sound-service-1-3 snd-pcm-oss
  alias sound-service-1-12 snd-pcm-oss

* Is reboot needed after modifying the /etc/modules.conf file?
* I read that all mixer channels are muted by default. How exactly we should adjust the soundcards volume level?. Somebody please suggest.

Regards,
Sailaja

#1 lore raw
Quoted 10 lines · SailajaReddy K

*I have installed alsa driver,lib, utilities successfully. But I couldn't see any cards in my system. Please see below outputs:

   **[root@aims-pc-100 alsa]# cat /proc/asound/cards
      --- no soundcards ---
   **[root@aims-pc-100 root]# lsmod
      Module                        Size        Used by
      snd_ice1712                65316        -

What else I need to do and check to confirm that ALSA is working fine for my card "ICE1712 - M Audio Delta 1010"?

In theory, it should work with the snd-ice1712 driver.

Is the card listed with lspci?

Quoted 1 line

Is reboot needed after modifying the /etc/modules.conf file?

Not if you reload the drivers manually.

Quoted 2 lines

I read that all mixer channels are muted by default. How exactly we should adjust the soundcards volume level?.

There is a special tool for your card: envy24control in the alsa-tools package.

HTH
Clemens

-------------------------------------------------------
SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift.
http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285