Skip to contentSkip to conversation

megaraid 2.10.1 and raid10

DISCUSSION Lucia Mazzoni 1 participant 1 message Aug 10, 2004 SCSI

lore
Share & tools
lore
#0 lore raw

Hi,
I've just subscribed this list trying to solve a big problem with megaraid2.c (I think...!).

We installed a Debian stable on 2 Intel server with an INTEL SRCU42X raid controller. The compiled kernel is a vanilla kernel 2.4.26 and the version of megaraid2 is 2.10.1.

The first server is configured only with raid1: no problem at all.
The second one is configured with a raid 10: 4 disks, 2 raid1 between disks on different channel and a raid0 on this set (with stripe size of 64k)

We experienced that when the second server has to do with file of "significant" size (greater than 10 Mb) it hangs during its operation (do not respond at all). After a while ...it ends the operation. This time depends on the size of the file (greater size ==> more time).
Operation are: copy, reading.... (files on this server are generally mailboxes).
After the first time the access time to a single file is faster for a while.

We tried megaraid 2.10.3 with kernel 2.4.27 but the timing results were even worst (35 sec for a file of 35Mb.......)

Any suggestions?
Raid 10 is not reliable with megaraid2? (that was the Intel support answer to my question.....)

Thanks in advance for any help
Lucia