Installed alsa (1.0.5)into 2.6.7 kernel:says nosoundcards
Hi Clemens,
Thanks for the reply.
Please find my comments inline..
Regards,
Sailaja
Quoted 14 lines
Date: Tue, 10 Aug 2004 11:20:10 +0200 (METDST)
From: Clemens Ladisch <[email protected]>
Subject: Re: [Alsa-devel] Installed alsa (1.0.5)into 2.6.7 kernel:says nosoundcards
To: [email protected]Quoted 8 lines · SailajaReddy K
*I have installed alsa driver,lib, utilities successfully. But I couldn't see any cards in my system. Please see below outputs:
**[root@aims-pc-100 alsa]# cat/proc/asound/cards
--- no soundcards ---
**[root@aims-pc-100 root]# lsmod
Module Size Used bysnd_ice171265316 -
Quoted 4 lines
Quoted 2 lines
What else I need to do and check to confirm that ALSA is working fine for my card "ICE1712 - M Audio Delta 1010"?
In theory, it should work with the snd-ice1712 driver. Is the card listed with lspci?
Nope. The below is the output of lspci:
[root@aims-pc-100 alsa-utils-1.0.5]# lspci
00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge (rev 03)
00:01.0 PCI bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset AGP Bridge (rev 03)
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 02) 00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 02) 00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 02) 00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 82) 00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 02) 00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 02) 00:1f.3 SMBus: Intel Corp. 82801DB SMBus (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP
8x] (rev c1)
02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139
C+ (rev 10)
How do I come out of this problem?
Shall I able to uninstall everything and install once again? Actually I haven't selected removing the modules option at the time of kernel configuration. In this case, how to unload the modules?
If I can uninstall and install everything, what are the exact steps I should follow?
Please help me out.
Quoted 2 lines
Quoted 1 line
Is reboot needed after modifying the
/etc/modules.conffile?Not if you reload the drivers manually.
I am a new user. Could you please tell me the meaning of reloading manually?
In my case I have installed alsa driver, lib, utils and modified the /etc/modules.conf
Quoted 4 lines
Quoted 2 lines
I read that all mixer channels are muted by default. How exactly we should adjust the soundcards volume level?.
There is a special tool for your card: envy24control in the alsa-tools package.
I haven't installed alsa-tools package. I will install and try this.
Quoted 36 lines
HTH
Clemens
[root@aims-pc-100 alsa-utils-1.0.5]# lspci
00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge (re
v 03)
00:01.0 PCI bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset AGP Bridge (rev
03)
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 02) 00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 02) 00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 02) 00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 82) 00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 02) 00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 02) 00:1f.3 SMBus: Intel Corp. 82801DB SMBus (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP
8x] (rev c1)
02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139
C+ (rev 10)Confidentiality Notice
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain confidential or privileged information. If you are not the intended recipient, please notify the sender at Wipro or [email protected] immediately and destroy all copies of this message and any attachments.