more pvmove problems

I've tried to search online, and found some mentions of a patch, but I can't be sure if it applies to my case.

Setup:
Redhat 7.2
LVM 1.0.8 from source

One of my drives started reporting read errors, so I got a new one, and wanted to replace it. Since I was replacing a 200G drive with a 250G, I too the chance to get rid of the 30G drive in there too.

Added the new drive, created a PV on it, added it to the VG and moved the 30G drive to it with pvmove, no problem. Then I started moving the 200G drive over.

Had an error early in the process, so I had to retry with the -i flag. It kept failing, so after reading up in the man page, I was able to copy the rest of the PV using the -n flag:

pvmove -v -i -n medialv:61-6076 /dev/hde /dev/hdh

36 hours later, the process finished. Now I figured I still need to move the first 60 PEs. But whatever I try, I can't get pvmove to work.

Here's what pvscan reports (hde is the drive I'm trying to retire):
pvscan -- reading all physical volumes (this may take a while...)

  pvscan -- ACTIVE   PV "/dev/hdg" of VG "mediavg" [189.88 GB / 0 free]
  pvscan -- ACTIVE   PV "/dev/hdh" of VG "mediavg" [233.72 GB / 17.84 GB free]
  pvscan -- ACTIVE   PV "/dev/hde" of VG "mediavg" [189.88 GB / 187.97 GB free]

pvscan -- inactive PV "/dev/hdd" is in no VG [27.96 GB]
pvscan -- ACTIVE PV "/dev/hdb" of VG "mediavg" [74.47 GB / 0 free]
pvscan -- total: 5 [716.10 GB] / in use: 4 [688.14 GB] / in no VG: 1 [27.96 GB]

And here's what I get when I try "pvmove -vv /dev/hde":
pvmove -- checking name of source physical volume "/dev/hde"
pvmove -- locking logical volume manager
pvmove -- reading data of source physical volume from "/dev/hde"
pvmove -- checking volume group existence
pvmove -- reading data of volume group "mediavg" from lvmtab
pvmove -- checking volume group consistency of "mediavg"
pvmove -- searching for source physical volume "/dev/hde" in volume group "mediavg" pvmove -- building list of possible destination physical volumes
pvmove -- checking volume group activity
pvmove -- moving physical extents in active volume group "mediavg"
pvmove -- WARNING: if you lose power during the move you may need
to restore your LVM metadata from backup!
pvmove -- do you want to continue? [y/n] y
pvmove -- starting to move extents away from physical volume "/dev/hde"
pvmove -- checking for enough free physical extents in "mediavg"
lv: /dev/mediavg/medialv[1] old_dev: 33:00 new_dev: 34:64 old_pe_sector: 65920 new_pe_sector: 452788608 pvmove -- opening output physical volume "/dev/hdh"
pvmove -- llseeking input physical volume "/dev/hde"
pvmove -- llseeking output physical volume "/dev/hdh"
pvmove -- /dev/hde [PE 0 [medialv [LE 0]]] -> /dev/hdh [PE 6908] [1/61]
pvmove -- locking physical extent 0 of "/dev/hde" in kernel
pvmove -- about to read input physical volume "/dev/hde" and to write output physical volume "/dev/hdh" pvmove -- remapping physical extent in VGDA of kernel
pvmove -- ERROR "Invalid argument" remapping
pvmove -- ERROR "pv_move(): LE of LV remap" moving physical extents

zsh: exit 23 sudo pvmove -vv /dev/hde

Any suggestions? At this point, I'm willing to lose some data off the drive, just so I can remove it and remount my partition.

If there's any other information I can provide, I'd be happy to.

Thanks!

Dan

Dan Boger
[email protected]