Skip to contentSkip to conversation

external modules make clean doesn't do much

DISCUSSION Duncan Sands 2 participants 7 messages Aug 31, 2004 – Sep 24, 2004

lore
Share & tools
lore
#0 lore raw

make clean for an external module only seems to clean .tmp_versions:

$ make clean
make -C /lib/modules/2.6.9-rc1/build M=`pwd` clean
make[1]: Entering directory `/home/duncan/Linux/linux-2.5'
  CLEAN   /home/duncan/SpeedTouch/.tmp_versions
make[1]: Leaving directory `/home/duncan/Linux/linux-2.5'
$

This leaves all the .o etc files which doesn't sound right...

All the best,

Duncan.

#1 lore raw
Quoted 11 lines · Duncan Sands

make clean for an external module only seems to clean .tmp_versions:

$ make clean
make -C /lib/modules/2.6.9-rc1/build M=`pwd` clean
make[1]: Entering directory `/home/duncan/Linux/linux-2.5'
  CLEAN   /home/duncan/SpeedTouch/.tmp_versions
make[1]: Leaving directory `/home/duncan/Linux/linux-2.5'
$

This leaves all the .o etc files which doesn't sound right...

Nope - let me try.

sam@mars rtl8180 $ ls *o

built-in.o   r8180_if.o        rtl8180.ko     rtl8180.o
priv_part.o  r8180_pci_init.o  rtl8180.mod.o  usercopy.o

sam@mars rtl8180 $ make -C ~/bk/kbuild M=$PWD clean
make: Entering directory `/home/sam/bk/kbuild'
CLEAN /home/sam/bk/external/rtl8180/.tmp_versions
make: Leaving directory `/home/sam/bk/kbuild' sam@mars rtl8180 $ ls *o
ls: *o: No such file or directory
sam@mars rtl8180 $ cat Makefile

obj-m           := rtl8180.o
rtl8180-y       += r8180_if.o r8180_pci_init.o usercopy.o
rtl8180-y       += priv_part.o

Looks to be OK here.
Please let me see the Makefile you use for SpeedTouch

Sam

#2 lore raw
Quoted 24 lines · Sam Ravnborg
Quoted 11 lines · Duncan Sands

make clean for an external module only seems to clean .tmp_versions:

$ make clean
make -C /lib/modules/2.6.9-rc1/build M=`pwd` clean
make[1]: Entering directory `/home/duncan/Linux/linux-2.5'
  CLEAN   /home/duncan/SpeedTouch/.tmp_versions
make[1]: Leaving directory `/home/duncan/Linux/linux-2.5'
$

This leaves all the .o etc files which doesn't sound right...

Nope - let me try.

sam@mars rtl8180 $ ls *o

built-in.o   r8180_if.o        rtl8180.ko     rtl8180.o
priv_part.o  r8180_pci_init.o  rtl8180.mod.o  usercopy.o

sam@mars rtl8180 $ make -C ~/bk/kbuild M=$PWD clean
make: Entering directory `/home/sam/bk/kbuild'
CLEAN /home/sam/bk/external/rtl8180/.tmp_versions
make: Leaving directory `/home/sam/bk/kbuild' sam@mars rtl8180 $ ls *o
ls: *o: No such file or directory
sam@mars rtl8180 $ cat Makefile

Quoted 7 lines
obj-m           := rtl8180.o
rtl8180-y       += r8180_if.o r8180_pci_init.o usercopy.o
rtl8180-y       += priv_part.o

Looks to be OK here.
Please let me see the Makefile you use for SpeedTouch

Hi Sam, thanks for looking into this. Here it is:

KERNELDIR := /lib/modules/$(shell uname -r)/build

obj-m := speedtch.o

all clean help modules modules_install:

	$(MAKE) -C $(KERNELDIR) M=$(PWD) $(filter-out all,$(MAKECMDGOALS))

install:

	$(MAKE) -C $(KERNELDIR) M=$(PWD) modules_install
#3 lore raw
In reply to Sam Ravnborg

Hi Sam, I found out what was triggering the problem: symbolic links. The setup was like this:

directory A contains Makefile, source code etc.
B is a symbolic link to A.
If I change directory into A, then "make clean" works fine.
If I change directory into B, then "make clean" only cleans .tmp_versions.

Strange but true...

All the best,

Duncan.

#4 lore raw
In reply to Sam Ravnborg
Quoted 24 lines · Sam Ravnborg
Quoted 11 lines · Duncan Sands

make clean for an external module only seems to clean .tmp_versions:

$ make clean
make -C /lib/modules/2.6.9-rc1/build M=`pwd` clean
make[1]: Entering directory `/home/duncan/Linux/linux-2.5'
  CLEAN   /home/duncan/SpeedTouch/.tmp_versions
make[1]: Leaving directory `/home/duncan/Linux/linux-2.5'
$

This leaves all the .o etc files which doesn't sound right...

Nope - let me try.

sam@mars rtl8180 $ ls *o

built-in.o   r8180_if.o        rtl8180.ko     rtl8180.o
priv_part.o  r8180_pci_init.o  rtl8180.mod.o  usercopy.o

sam@mars rtl8180 $ make -C ~/bk/kbuild M=$PWD clean
make: Entering directory `/home/sam/bk/kbuild'
CLEAN /home/sam/bk/external/rtl8180/.tmp_versions
make: Leaving directory `/home/sam/bk/kbuild' sam@mars rtl8180 $ ls *o
ls: *o: No such file or directory
sam@mars rtl8180 $ cat Makefile

Quoted 7 lines
obj-m           := rtl8180.o
rtl8180-y       += r8180_if.o r8180_pci_init.o usercopy.o
rtl8180-y       += priv_part.o

Looks to be OK here.
Please let me see the Makefile you use for SpeedTouch

Hi Sam, as I mentioned in another mail, if you get to your current working directory via a symlink, then clean doesn't work properly (this was the problem I hit). Did you work out what's going on?

Thanks for your help,

Duncan.

#5 lore raw
Quoted 5 lines

Hi Sam, as I mentioned in another mail, if you get to your current working directory via a symlink, then clean doesn't work properly (this was the problem I hit). Did you work out what's going on?

Hi Duncan.
I have not looked into this yet, but your response is saved in my todo list.
Being overloaded (read: no time for Linux matters) for now it will take a while before I get to this.

Sam

#6 lore raw
Quoted 2 lines

Being overloaded (read: no time for Linux matters) for now it will take a while before I get to this.

I know that feeling too well... :) Anyway, there's no hurry as far as I'm concerned.

All the best,

Duncan.