Problem using tftp whith ColdFire 5282
Hello.
I ported the U-BOOT for the ColdFire MCF5282. I have written the routines that
are needed to initialise the processor, and it works properly. The platform what I working with, is the AVNET platform.
The code can be easily ported to the M5282EVB platform, by doing fews modifications.
U-BOOT starts properly, and I write:
-> setenv ethaddr xx:xx:xx:xx:xx:xx (AVNET MAC address)
-> setenv ipaddr yy.yy.yy.yy (the AVNET IP
address)
-> setenv serverip zz.zz.zz.zz (server IP address)
the problem is when I write:
-> tftp 10000 /tftpboot/image.bin
and the answer is:
TX timeout
fec.c[124] eth_send: cycles: 100 status: 8c00 retry cnt: 0
TX timeout
fec.c[124] eth_send: cycles: 100 status: ac00 retry cnt: 0
TX timeout
fec.c[124] eth_send: cycles: 100 status: 8c00 retry cnt: 0
.
.
.until I press CTRL+C, to escape. Does anybody know how to solve this problem?
When i do "ping yy.yy.yy.yy", it does not wok!!!
I think the driver contained on /u-boot-1.1.1/cpu/mcf52x2/fec.c, works properly, but I would like tho know if it should initialise the PHY or not.
Thanks
_________________________________________________________________
Acepta el reto MSN Premium: Protecci?n para tus hijos en internet. Desc?rgalo y pru?balo 2 meses gratis.
http://join.msn.com?XAPID=1697&DI=1055&HL=Footer_mailsenviados_proteccioninfantil
Quoted 8 lines · In message <[email protected]> you wrote:
Hello.
I ported the U-BOOT for the ColdFire MCF5282. I have written the routines that
are needed to initialise the processor, and it works properly. The platform what I working with, is the AVNET platform.
The code can be easily ported to the M5282EVB platform, by doing fews modifications.
WHO THE HELL ARE YOU???
You posted the same message THREE TIMES BEFORE using the name "Javier Ruiz de Munain", and now you post it again as "Sonia Martinez Baro" ???
???
Wolfgang Denk
Signature · 3 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd at denx.de The software required `Windows 95 or better', so I installed Linux.