Synaptics detection not working reliably?
Hi,
There is something weird with Synaptics detection in 2.6.8.1 in a Fujitsu S7010 laptop with a touchpad/stick combo. The problem is as follows:
- The first time the driver is loaded, either compiled in or as a module and
regardless of options provided, the mouse is detected as a bare PS/2:
I: Bus=0011 Vendor=0001 Product=0001 Version=ab54
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
H: Handlers=kbd event0
B: EV=120003
B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
B: LED=7
I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Generic Mouse"
P: Phys=isa0060/serio4/input0
H: Handlers=mouse0 event1
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3
- If I unload psmouse without actually using the mouse, and reload it again,
it is detected again as a bare PS/2.
- If I load psmouse and actually use the mouse, which initially behaves erratically
but eventually settlles down, and only then reload the module, it is now correctly detected:
I: Bus=0011 Vendor=0001 Product=0001 Version=ab54
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
H: Handlers=kbd event0
B: EV=120003
B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
B: LED=7
I: Bus=0011 Vendor=0002 Product=0007 Version=0000
N: Name="SynPS/2 Synaptics TouchPad"
P: Phys=isa0060/serio4/input0
H: Handlers=mouse0 event1
B: EV=b
B: KEY=6420 0 70003 0 0 0 0 0 0 0 0
B: ABS=11000003
I: Bus=0011 Vendor=0002 Product=0001 Version=0000
N: Name="PS/2 Generic Mouse"
P: Phys=synaptics-pt/serio0/input0
H: Handlers=mouse1 event2
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3
The relevant section of /var/log/messages is:
Sep 6 14:29:59 localhost kernel: input: PS/2 Generic Mouse on isa0060/serio4 Sep 6 14:29:59 localhost udev[3329]: configured rule in '/etc/udev/rules.d//50 Sep 6 14:29:59 localhost udev[3329]: creating device node '/udev/input/mouse0' Sep 6 14:29:59 localhost udev[3330]: configured rule in '/etc/udev/rules.d//50 Sep 6 14:29:59 localhost udev[3330]: creating device node '/udev/input/event1' Sep 6 14:30:44 localhost kernel: psmouse.c: Mouse at isa0060/serio4/input0 los Sep 6 14:30:56 localhost udev[3594]: removing device node '/udev/input/mouse0' Sep 6 14:30:56 localhost udev[3607]: removing device node '/udev/input/event1' Sep 6 14:31:00 localhost kernel: Synaptics Touchpad, model: 1 Sep 6 14:31:00 localhost kernel: Firmware: 5.9 Sep 6 14:31:00 localhost kernel: Sensor: 15 Sep 6 14:31:00 localhost kernel: new absolute packet format Sep 6 14:31:00 localhost kernel: Touchpad has extended capability bits Sep 6 14:31:00 localhost kernel: -> 2 multi-buttons, i.e. besides standard bu Sep 6 14:31:00 localhost kernel: -> multifinger detection Sep 6 14:31:00 localhost kernel: -> palm detection Sep 6 14:31:00 localhost kernel: -> pass-through port Sep 6 14:31:01 localhost kernel: input: SynPS/2 Synaptics TouchPad on isa0060/ Sep 6 14:31:01 localhost kernel: serio: Synaptics pass-through port at isa0060 Sep 6 14:31:01 localhost kernel: input: PS/2 Generic Mouse on synaptics-pt/ser Sep 6 14:31:02 localhost udev[3671]: configured rule in '/etc/udev/rules.d//50 Sep 6 14:31:02 localhost udev[3671]: creating device node '/udev/input/mouse0' Sep 6 14:31:02 localhost udev[3672]: configured rule in '/etc/udev/rules.d//50 Sep 6 14:31:02 localhost udev[3672]: creating device node '/udev/input/event1' Sep 6 14:31:02 localhost udev[3673]: configured rule in '/etc/udev/rules.d//50 Sep 6 14:31:02 localhost udev[3673]: creating device node '/udev/input/mouse1' Sep 6 14:31:02 localhost udev[3674]: configured rule in '/etc/udev/rules.d//50 Sep 6 14:31:02 localhost udev[3674]: creating device node '/udev/input/event2'
This happens on an installation of Fedora Core 2+current updates. Kernel configuration is copied from the original Fedora Core kernel. X.org 6.7 is used and configured with the plain "mouse" driver.
Is this a known problem? Is there a known solution or an workaround?
Signature · 2 lines
Jose Orlando Pereira * mailto:[email protected] * http://gsd.di.uminho.pt/~jop *
Quoted 8 lines · José Orlando Pereira
Hi,
There is something weird with Synaptics detection in 2.6.8.1 in a Fujitsu S7010 laptop with a touchpad/stick combo. The problem is as follows:
- The first time the driver is loaded, either compiled in or as a module and
regardless of options provided, the mouse is detected as a bare PS/2:
Most likely "USB Legacy emulation problem". Load psmouse module after loading all USB modules so USB can disable the emulation mode before psmouse gets to probe hardware.
Signature · 1 line
Dmitry