Skip to contentSkip to conversation

displaying kbuild dependancies ...

DISCUSSION Herbert Poetzl 3 participants 5 messages Sep 11, 2004 – Sep 14, 2004

lore
Share & tools
lore
#0 lore raw

Hi Sam!

first, thanks for the kbuild stuff and all the time spent on that ... I really love it

from time to time I encounter some issue which usually keeps me busy for a while, and I think there probably is a simpler solution to that ...

the procedure:

I'm configuring a 2.6.X-rcY-bkZ kernel for testing with QEMU, which in my setup basically requires some QEMU specific settings, I usually turn on/off by just editing the .config file by hand, and then invoking 'make oldconfig' ...

to keep the possibility for error low, I usually just remove the entries in question, and oldconfig will ask me the relevant question, leading to a nice config adapted to my purposes ...

the issue:

sometimes a dependancy doesn't allow me to remove a config option, I absolutely have to remove for my setup, like the VGA_CONSOLE, and then the hunt for the option 'requiring' that one unconditinally beginns ...

usually I start with grep and end with trial and error, until I find the malicious dependancy ...

so, now the question:

is there a magic option, simple procedure, or just quick and dirty hack to get a list or some kind of dependancy graph from the kbuild system?

TIA,
Herbert

#1 lore raw
Quoted 26 lines · Herbert Poetzl

Hi Sam!

first, thanks for the kbuild stuff and all the time spent on that ... I really love it

from time to time I encounter some issue which usually keeps me busy for a while, and I think there probably is a simpler solution to that ...

the procedure:

I'm configuring a 2.6.X-rcY-bkZ kernel for testing with QEMU, which in my setup basically requires some QEMU specific settings, I usually turn on/off by just editing the .config file by hand, and then invoking 'make oldconfig' ...

to keep the possibility for error low, I usually just remove the entries in question, and oldconfig will ask me the relevant question, leading to a nice config adapted to my purposes ...

the issue:

Quoted 8 lines

sometimes a dependancy doesn't allow me to remove a config option, I absolutely have to remove for my setup, like the VGA_CONSOLE, and then the hunt for the option 'requiring' that one unconditinally beginns ...

usually I start with grep and end with trial and error, until I find the malicious dependancy ...

The only option today is to turn on the debug option in 'make xconfig'.

I have been looking inot something better for menuconfig but frankly kconfig is not where I feel most comfortable.

Sam

#2 lore raw
Quoted 33 lines · Sam Ravnborg
Quoted 32 lines · Herbert Poetzl

Hi Sam!

first, thanks for the kbuild stuff and all the time spent on that ... I really love it

from time to time I encounter some issue which usually keeps me busy for a while, and I think there probably is a simpler solution to that ...

the procedure:

I'm configuring a 2.6.X-rcY-bkZ kernel for testing with QEMU, which in my setup basically requires some QEMU specific settings, I usually turn on/off by just editing the .config file by hand, and then invoking 'make oldconfig' ...

to keep the possibility for error low, I usually just remove the entries in question, and oldconfig will ask me the relevant question, leading to a nice config adapted to my purposes ...

the issue:

sometimes a dependancy doesn't allow me to remove a config option, I absolutely have to remove for my setup, like the VGA_CONSOLE, and then the hunt for the option 'requiring' that one unconditinally beginns ...

Quoted 5 lines
Quoted 2 lines

usually I start with grep and end with trial and error, until I find the malicious dependancy ...

The only option today is to turn on the debug option in 'make xconfig'.

hmm, so no luck for the typical console user :(

Quoted 2 lines

I have been looking inot something better for menuconfig but frankly kconfig is not where I feel most comfortable.

it would be sufficient to be able to turn on some
debug output, which says 'foo selected from bla'
or 'foo disabled, requires bla and whatnot' ...

anyway, thanks for the feedback,
Herbert

Quoted 6 lines

Sam
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#3 lore raw

On Sun, 12 Sep 2004 23:30:34 +0200 Herbert Poetzl wrote:

| On Sat, Sep 11, 2004 at 11:39:31PM +0200, Sam Ravnborg wrote:
| > On Sat, Sep 11, 2004 at 10:25:48PM +0200, Herbert Poetzl wrote:
| > > 
| > > Hi Sam!
| > > 
| > > first, thanks for the kbuild stuff and all the 
| > > time spent on that ... I really love it
| > > 
| > > 
| > > from time to time I encounter some issue which
| > > usually keeps me busy for a while, and I think
| > > there probably is a simpler solution to that ...
| > > 
| > > the procedure:
| > > 
| > > I'm configuring a 2.6.X-rcY-bkZ kernel for testing
| > > with QEMU, which in my setup basically requires
| > > some QEMU specific settings, I usually turn on/off
| > > by just editing the .config file by hand, and then
| > > invoking 'make oldconfig' ...
| > > 
| > > to keep the possibility for error low, I usually
| > > just remove the entries in question, and oldconfig
| > > will ask me the relevant question, leading to a
| > > nice config adapted to my purposes ...
| > > 
| > > the issue:
| > > 
| > > sometimes a dependancy doesn't allow me to remove
| > > a config option, I absolutely have to remove for
| > > my setup, like the VGA_CONSOLE, and then the hunt
| > > for the option 'requiring' that one unconditinally
| > > beginns ...
| > > 
| > > usually I start with grep and end with trial and
| > > error, until I find the malicious dependancy ...
| > 
| > The only option today is to turn on the debug option
| > in 'make xconfig'.
| 
| hmm, so no luck for the typical console user  :(
| 
| > I have been looking inot something better for menuconfig
| > but frankly kconfig is not where I feel most comfortable.
| 
| it would be sufficient to be able to turn on some
| debug output, which says 'foo selected from bla'
| or 'foo disabled, requires bla and whatnot' ...

There are some menuconfig patches in -mm (from Yuval Turgeman) that add a search option (using '/') to menuconfig. E.g., enter / + USB_STORAGE and you can see everywhere that USB_STORAGE is used.... and that it SELECTs SCSI. To see only the USB_STORAGE kconfig entry, use a regex:
^USB_STORAGE$

IIRC, Yuval is considering how to enhance this feature.

--
~Randy

#4 lore raw
Quoted 51 lines · Randy.Dunlap

On Sun, 12 Sep 2004 23:30:34 +0200 Herbert Poetzl wrote:

| On Sat, Sep 11, 2004 at 11:39:31PM +0200, Sam Ravnborg wrote:
| > On Sat, Sep 11, 2004 at 10:25:48PM +0200, Herbert Poetzl wrote:
| > > 
| > > Hi Sam!
| > > 
| > > first, thanks for the kbuild stuff and all the 
| > > time spent on that ... I really love it
| > > 
| > > 
| > > from time to time I encounter some issue which
| > > usually keeps me busy for a while, and I think
| > > there probably is a simpler solution to that ...
| > > 
| > > the procedure:
| > > 
| > > I'm configuring a 2.6.X-rcY-bkZ kernel for testing
| > > with QEMU, which in my setup basically requires
| > > some QEMU specific settings, I usually turn on/off
| > > by just editing the .config file by hand, and then
| > > invoking 'make oldconfig' ...
| > > 
| > > to keep the possibility for error low, I usually
| > > just remove the entries in question, and oldconfig
| > > will ask me the relevant question, leading to a
| > > nice config adapted to my purposes ...
| > > 
| > > the issue:
| > > 
| > > sometimes a dependancy doesn't allow me to remove
| > > a config option, I absolutely have to remove for
| > > my setup, like the VGA_CONSOLE, and then the hunt
| > > for the option 'requiring' that one unconditinally
| > > beginns ...
| > > 
| > > usually I start with grep and end with trial and
| > > error, until I find the malicious dependancy ...
| > 
| > The only option today is to turn on the debug option
| > in 'make xconfig'.
| 
| hmm, so no luck for the typical console user  :(
| 
| > I have been looking inot something better for menuconfig
| > but frankly kconfig is not where I feel most comfortable.
| 
| it would be sufficient to be able to turn on some
| debug output, which says 'foo selected from bla'
| or 'foo disabled, requires bla and whatnot' ...
Quoted 6 lines

There are some menuconfig patches in -mm (from Yuval Turgeman) that add a search option (using '/') to menuconfig. E.g., enter / + USB_STORAGE and you can see everywhere that USB_STORAGE is used.... and that it SELECTs SCSI. To see only the USB_STORAGE kconfig entry, use a regex:
^USB_STORAGE$

sounds great!
will investigate this ...

Quoted 1 line

IIRC, Yuval is considering how to enhance this feature.

thanks for the info,
Herbert

Quoted 2 lines

--
~Randy