DRM regression in Linux 2.6.9-rc1-bk12
Hi!
[ I suspect dri-devel is going to bounce my mails, so I'm CC'ing
linux-kernel ]
DRI stopped working on my setup in Linux 2.6.9-rc1-bk12. I've
narrowed the problem down to this changeset (Drop __HAVE_CTX_BITMAP, __HAVE_SG, __HAVE_PCI_DMA):
http://linux.bkbits.net:8080/linux-2.5/cset@413a5e3ecfrYcOqFo6JOgkPIU-qVmQ
Backing this patch out makes DRI in -bk12 work again.
I've verified this on two machines with PCI Radeon 7000 cards, so
there's PCIGART stuff involved; unfortunately I don't have any AGP Radeons to test with. (I originally suspected the __REALLY_HAVE_AGP change, but that's fine, along with the DRIVER_FILE_FIELDS removal).
For what it matters, I'm primarily testing on a ppc Macintosh, but
I've verified this on a PC too.
Wow, there was no kidding about DRM being difficult to read. :-)
I hope this is helpful, but I don't urgently need DRI working. I'd be glad to give any help tracking the problem down.
On kernels with non-working DRM, I get this message from the kernel:
[drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held [drm:radeon_unlock] *ERROR* Process 2150 using kernel context 0
While X says:
[24] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) RADEON(0): [drm] loaded kernel module for "radeon" driver (II) RADEON(0): [drm] created "radeon" driver at busid "PCI:0:18:0" (II) RADEON(0): [drm] added 8192 byte SAREA at 0xcd971000 (II) RADEON(0): [drm] mapped SAREA 0xcd971000 to 0xb5d89000 (II) RADEON(0): [drm] framebuffer handle = 0xd8000000 (II) RADEON(0): [drm] added 1 reserved context for kernel
(EE) RADEON(0): [pci] Out of memory (-1007) <------- *** LOOK HERE ***
(II) RADEON(0): [drm] removed 1 reserved context for kernel (II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xcd971000 at 0xb5d89000
(II) RADEON(0): Memory manager initialized to (0,0) (1280,6553) (II) RADEON(0): Reserved area from (0,1024) to (1280,1026) (II) RADEON(0): Largest offscreen area available: 1280 x 5527 (II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
<snip>
(II) RADEON(0): Direct rendering disabled
Thanks!
--
Joseph Fannin
[email protected]
"Bull in pure form is rare; there is usually some contamination by data."
-- William Graves Perry Jr.
Thanks for this report, I'll look over the changes for pcigart this evening, I don't own a PCI radeon to test on... hopefully it's just something small in the reduced macro code...
Dave.
Quoted 80 lines · Joseph Fannin
Hi!
[ I suspect dri-devel is going to bounce my mails, so I'm CC'ing
linux-kernel ]DRI stopped working on my setup in Linux 2.6.9-rc1-bk12. I've
narrowed the problem down to this changeset (Drop__HAVE_CTX_BITMAP,__HAVE_SG,__HAVE_PCI_DMA):http://linux.bkbits.net:8080/linux-2.5/cset@413a5e3ecfrYcOqFo6JOgkPIU-qVmQ
Backing this patch out makes DRI in -bk12 work again.
I've verified this on two machines with PCI Radeon 7000 cards, so
there's PCIGART stuff involved; unfortunately I don't have any AGP Radeons to test with. (I originally suspected the__REALLY_HAVE_AGPchange, but that's fine, along with theDRIVER_FILE_FIELDSremoval).For what it matters, I'm primarily testing on a ppc Macintosh, but
I've verified this on a PC too.Wow, there was no kidding about DRM being difficult to read. :-)
I hope this is helpful, but I don't urgently need DRI working. I'd be glad to give any help tracking the problem down.On kernels with non-working DRM, I get this message from the kernel:
[drm:radeon_cp_init] *ERROR*
radeon_cp_initcalled without lock held [drm:radeon_unlock] *ERROR* Process 2150 using kernel context 0While X says:
[24] 0 0
0x000003c0-0x000003df(0x20) IS[B](OprU)
drmOpenDevice: minor is 0
drmOpenDevice: node name is/dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is/dev/dri/card0
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: open result is -1, (Unknown error 999)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is/dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) RADEON(0): [drm] loaded kernel module for "radeon" driver (II) RADEON(0): [drm] created "radeon" driver at busid "PCI:0:18:0" (II) RADEON(0): [drm] added 8192 byte SAREA at0xcd971000(II) RADEON(0): [drm] mapped SAREA0xcd971000to0xb5d89000(II) RADEON(0): [drm] framebuffer handle =0xd8000000(II) RADEON(0): [drm] added 1 reserved context for kernel(EE) RADEON(0): [pci] Out of memory (-1007) <------- *** LOOK HERE ***
(II) RADEON(0): [drm] removed 1 reserved context for kernel (II) RADEON(0): [drm] unmapping 8192 bytes of SAREA
0xcd971000at0xb5d89000
(II) RADEON(0): Memory manager initialized to (0,0) (1280,6553) (II) RADEON(0): Reserved area from (0,1024) to (1280,1026) (II) RADEON(0): Largest offscreen area available: 1280 x 5527 (II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)<snip>
(II) RADEON(0): Direct rendering disabled
Thanks!
--
Joseph Fannin
[email protected]"Bull in pure form is rare; there is usually some contamination by data."
-- William Graves Perry Jr.
This should fix the problem
===== linux/drm_scatter.h 1.6 vs edited =====
linux/drm_scatter.h Thu Sep 16 01:11:13 2004 renamed from linux/drm_scatter.h Sun Sep 5 21:22:06 2004 +1 -1
@@ -73,7 +73,7 @@ DRM_DEBUG( "%s\n", __FUNCTION__ ); - if (drm_core_check_feature(dev, DRIVER_SG)) + if (!drm_core_check_feature(dev, DRIVER_SG)) return -EINVAL; if ( dev->sg )
Signature · 2 lines
Jon Smirl [email protected]
Quoted 7 lines · Jon Smirl
This should fix the problem
=====
linux/drm_scatter.h1.6 vs edited ===== +++edited/linux/drm_scatter.hThu Sep 16 01:11:13 2004
linux/drm_scatter.h Thu Sep 16 01:11:13 2004 line 79
Quoted 8 lines
linux/drm_scatter.h Thu Sep 16 01:11:13 2004 renamed from linux/drm_scatter.h Sun Sep 5 21:22:06 2004 +1
-1@@ -73,7 +73,7 @@ DRM_DEBUG( "%s\n", __FUNCTION__ ); - if (drm_core_check_feature(dev, DRIVER_SG)) + if (!drm_core_check_feature(dev, DRIVER_SG)) return -EINVAL; if ( dev->sg )
Yes, it does (tested with this change in 2.6.9-rc2-mm1).
Thanks again!
Signature · 4 lines
Joseph Fannin [email protected] "That's all I have to say about that." -- Forrest Gump.