rename generic_defconfig to defconfig?
Just thought I'd float the idea of making the ia64 defconfig into a generic ia64 kernel config. It's probably easiest just to rename generic_defconfig to defconfig since that already works everywhere (well, except for akpm's box apparently). That would make it extra easy to build a working kernel for the various ia64 boxes out there...
Jesse
Quoted 6 lines
Just thought I'd float the idea of making the ia64 defconfig into a generic ia64 kernel config. It's probably easiest just to rename
generic_defconfigto defconfig since that already works everywhere (well, except for akpm's box apparently). That would make it extra easy to build a working kernel for the various ia64 boxes out there...
Sounds plausible. I'd also like to keep some more system specific config files updated as well (to make it easier to see which combinations of NUMA/DISCONTIG/VIRTUAL_MEM_MAP are being used ... and thus try to avoid changes that prevent them from even building).
Does anyone have a zx1_defconfig that works for 2.6.9-rc2? I just tried to use the current one to rebuild for my zx2000 and the kernel made the system sing like a shortwave radio without printing a single character to the screen :-(
-Tony
Quoted 4 lines · Tony
Does anyone have a
zx1_defconfigthat works for 2.6.9-rc2? I just tried to use the current one to rebuild for my zx2000 and the kernel made the system sing like a shortwave radio without printing a single character to the screen :-(
zx1_defconfig works for me on rx8620 and rx4640 ...
Signature · 6 lines
"Next the statesmen will invent cheap lies, putting the blame upon the nation that is attacked, and every man will be glad of those conscience-soothing falsities, and will diligently study them, and refuse to examine any refutations of them; and thus he will by and by convince himself that the war is just, and will thank God for the better sleep he enjoys after this process of grotesque self-deception." -- Mark Twain
Quoted 7 lines · Tony
Quoted 6 lines
Just thought I'd float the idea of making the ia64 defconfig into a generic ia64 kernel config. It's probably easiest just to rename
generic_defconfigto defconfig since that already works everywhere (well, except for akpm's box apparently). That would make it extra easy to build a working kernel for the various ia64 boxes out there...
Quoted 5 lines
Sounds plausible. I'd also like to keep some more system specific config files updated as well (to make it easier to see which combinations of NUMA/DISCONTIG/VIRTUAL_MEM_MAP are being used ... and thus try to avoid changes that prevent them from even building).
I could come up with a bigsur_defconfig next week (my machine is due for a kernel upgrade).
Jesse
Quoted 5 lines · Jesse Barnes
Just thought I'd float the idea of making the ia64 defconfig into a generic ia64 kernel config. It's probably easiest just to rename
generic_defconfigto defconfig since that already works everywhere (well, except for akpm's box apparently). That would make it extra easy to build a working kernel for the various ia64 boxes out there...
Sounds like a good idea to me. If the idea is to make it as easy as possible to build working kernels, maybe we should also make some things static rather than modules. For starters:
CONFIG_TULIP (HP superdome core I/O and 4-port cards) CONFIG_E100 (i2000)
CONFIG_E1000 (Tiger)
CONFIG_USB_EHCI_HCD (HP boxes) CONFIG_USB_OHCI_HCD (HP boxes) CONFIG_USB_HID
Or maybe I'm the only one who's too lazy to mess with modules for every build.
I think generic_defconfig currently builds a McKinley kernel, which may be the right thing, but you do have to remember to switch back to CONFIG_ITANIUM for i2000.
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Jesse" = Jesse Barnes <[email protected]> writes:
Quoted 6 lines · Tony
Quoted 6 lines
Quoted 1 line
Just thought I'd float the idea of making the ia64 defconfig >into
a generic ia64 kernel config. It's probably easiest just >to rename
generic_defconfigto defconfig since that already >works everywhere (well, except for akpm's box apparently). >That would make it extra easy to build a working kernel for >the various ia64 boxes out there...
Generic_defconfig still doesn't work on the simulator, yet. So we at least need that config hanging around too.
Signature · 2 lines
Dr Peter Chubb http://www.gelato.unsw.edu.au peterc AT gelato.unsw.edu.au The technical we do immediately, the political takes *forever*
Quoted 2 lines
I could come up with a
bigsur_defconfignext week (my machine is due for a kernel upgrade).
Attached is the config that I'm using on my Tiger at the moment (derived from generic by turning on DIG, turning off NUMA, dropping cpus from 512 to 4, and messing with a few device drivers).
-Tony
Quoted 7 lines · Tony
Quoted 2 lines
I could come up with a
bigsur_defconfignext week (my machine is due for a kernel upgrade).Attached is the config that I'm using on my Tiger at the moment (derived from generic by turning on DIG, turning off NUMA, dropping cpus from 512 to 4, and messing with a few device drivers).
I'm pretty sure CONFIG_VIRTUAL_MEM_MAP isn't needed either. Also, which device drivers did you have to tweak? Should those changes also go into generic_defconfig?
Thanks,
Jesse
Quoted 18 lines · Bjorn Helgaas
Quoted 5 lines · Jesse Barnes
Just thought I'd float the idea of making the ia64 defconfig into a generic ia64 kernel config. It's probably easiest just to rename
generic_defconfigto defconfig since that already works everywhere (well, except for akpm's box apparently). That would make it extra easy to build a working kernel for the various ia64 boxes out there...Sounds like a good idea to me. If the idea is to make it as easy as possible to build working kernels, maybe we should also make some things static rather than modules. For starters:
CONFIG_TULIP(HP superdome core I/O and 4-port cards)CONFIG_E100(i2000)
CONFIG_E1000(Tiger)
CONFIG_USB_EHCI_HCD(HP boxes)CONFIG_USB_OHCI_HCD(HP boxes)CONFIG_USB_HID
Quoted 2 lines
Or maybe I'm the only one who's too lazy to mess with modules for every build.
No, I think you have a point there :) I *really* don't like having to copy modules over. If tg3 isn't builtin yet, it would be nice too.
Quoted 3 lines
I think
generic_defconfigcurrently builds a McKinley kernel, which may be the right thing, but you do have to remember to switch back toCONFIG_ITANIUMfor i2000.
Right, but those boxes are mainly for the masochists among us, so I think a McKinley setting is the right choice.
Jesse
Quoted 6 lines
I'm pretty sure
CONFIG_VIRTUAL_MEM_MAPisn't needed either. Also, which
device drivers did you have to tweak? Should those changes also go intogeneric_defconfig?
Tigers with more than 2G of memory have a hole in the physical address space (from 2G to 4G) reserved for memory mapped I/O. So VIRTUAL_MEM_MAP (or I suppose DISCONTIG) is needed to avoid wasting memory on page structs for non-existant memory.
The device driver bits are changing 'M' to 'Y' on devices. Like Bjorn I'm too lazy to mess with modules on every build.
-Tony
Quoted 6 lines · Jesse Barnes
Quoted 2 lines
Or maybe I'm the only one who's too lazy to mess with modules for every build.
No, I think you have a point there :) I *really* don't like having to copy modules over. If tg3 isn't builtin yet, it would be nice too.
Quoted 6 lines
Quoted 3 lines
I think
generic_defconfigcurrently builds a McKinley kernel, which may be the right thing, but you do have to remember to switch back toCONFIG_ITANIUMfor i2000.Right, but those boxes are mainly for the masochists among us, so I think a McKinley setting is the right choice.
Given the above, generic_defconfig seems to be in good shape to takeover as defconfig. Tony?
Jesse
Quoted 2 lines
Given the above,
generic_defconfigseems to be in good shape to takeover as defconfig. Tony?
That sounds ok to me ... "arch/ia64/defconfig" doesn't really fit anyone's machine right now (does it ... speak up now if you are somehow depending on it).
So I assume the proposal to to update defconfig with the current contents of arch/ia64/configs/gen_defconfig, and then delete gen_defconfig? That way defconfig is something that actually builds and boots on a fairly wide variety of machines.
-Tony
Quoted 6 lines · Tony
Quoted 2 lines
Given the above,
generic_defconfigseems to be in good shape to takeover as defconfig. Tony?That sounds ok to me ... "
arch/ia64/defconfig" doesn't really fit anyone's machine right now (does it ... speak up now if you are somehow depending on it).
It looks like some sort of zx1 config.
Quoted 4 lines
So I assume the proposal to to update defconfig with the current contents of
arch/ia64/configs/gen_defconfig, and then deletegen_defconfig? That way defconfig is something that actually builds and boots on a fairly wide variety of machines.
Yep, that sounds great.
Jesse
Quoted 6 lines
Quoted 4 lines
So I assume the proposal to to update defconfig with the current contents of
arch/ia64/configs/gen_defconfig, and then deletegen_defconfig? That way defconfig is something that actually builds and boots on a fairly wide variety of machines.Yep, that sounds great.
Ok. I just pushed a change up to bkbits.net (whole defconfig file attached to this e-mail for non-BK users). It boots on Tiger, and meets my module-pain threshhold (doesn't require initrd to boot), but it does pull in a bunch of USB and ACPI modules after it boots. I'm happy to take more patches to make it run standalone.
-Tony